Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Culver City
Gate installation in Culver City usually runs between $1,400 and $4,800 depending on whether you’re hanging a new ornamental iron pedestrian gate or automating a heavy driveway gate with a duty-rated operator. Most installations on the city’s 1920s-1950s Spanish Colonial and Craftsman homes involve either replacing corroded original ironwork or retrofitting a modern opener onto a gate that was built decades before automation existed. We work these neighborhoods weekly, from the Fox Hills side down through Clarkdale and into the bungalow streets off Sepulveda near downtown, so we know what the salt air does to posts, hinges, and control boards. Call (626) 649-4572 and you’ll get a live person, a straight answer on timing, and a written price before any work begins.
Key Takeaways:
- Full gate installations in Culver City typically run $1,400-$4,800, with written pricing before any work starts.
- Original 1920s-1950s ironwork often corrodes prematurely from marine-layer salt air reaching 3-4 miles inland.
- Sliding gates and swing gates, pedestrian and double gates, security gates and driveway gates are all in our wheelhouse.
- Every job includes shoe covers, drop cloths, a cleanup photo, and the 365-Day Done Right Promise.
- Live person answers calls 24/7 at (626) 649-4572.
Why Latch & Post Gate Repair Is Culver City’s Preferred Gate Installation Company
Latch & Post Gate Repair has operated as part of the Cedarwell family of independently owned gate specialists since 2009, and the crews who work Culver City live with the same marine layer you do. We’re not a general handyman service taking a shot at a gate job between faucet repairs. Every latch we set, every post we reset, every operator we wire is the whole job, not a side errand. Culver City homeowners tell us what our technicians tell them: the gate gets treated like it belongs to someone who has to live with it for twenty years.
Cody Beckman leads our team with a simple rule: name the exact brand, explain the exact failure, and show the exact price before any tool comes out of the truck. Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every visit. That means we ask before we move anything, we lay drop cloths on the floor before stepping inside, we put on shoe covers at the door, and we leave a photo of the clean-up so you can see the state we left things in. We can also schedule around nap time when quiet matters, and we’re glad to. Kids and pets don’t need a gate crew’s noise and dust in their afternoon.
Every call goes to a live person, 24 hours a day, including holidays. If your gate is stuck open at midnight and the dogs want to wander toward Washington Boulevard, you won’t get a voicemail tree.
Automatic Gate Installation in Culver City
Automatic Gate Installation in Culver City usually means one of two things: bringing power and a modern operator to an original wrought iron swing gate that was hung for manual use, or replacing a corroded legacy operator that’s been dying in the salt air for years. We install and wire the full system, operator, safety edges, photocells, and keypad or remote control. Most automatic gate installations on residential property in Culver City run $2,200-$4,800, and you’ll see the exact number in writing before we order a single part.
Retrofits on Legacy Iron Gates
The best part of our Gate Installation work in Culver City is the retrofits where the original gate stays. Spanish Colonial homes off Braddock Drive and along the tree streets near Veterans Memorial Park often have gorgeous original iron that’s worth saving. We reset footings, correct sag, upgrade hinges, and fit a modern LiftMaster or FAAC operator with new safety photocells. The gate looks the same, but it now opens reliably and safely.
Full Operator Replacement
Salt-laden moisture from the marine layer works its way into the electrical contacts inside gate operator housings. By the time a Culver City operator is clicking but not moving, the corrosion is usually internal, and a clean-and-repair won’t hold. We quote a full replacement with a duty-rated operator that matches the gate’s weight and cycle frequency. That quote comes before any work starts.
Gate Installation Services in Culver City
Our Gate Installation in Culver City services cover the full range: driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A new pedestrian gate with standard ornamental iron and hardware typically runs $1,400-$2,800. Driveway gates run higher because the posts and footings usually need to be set or reset to carry the weight and the operator cycle count. The price depends on gate width, material, whether we’re cutting out the old post footings or pouring new ones, and whether power needs to be run to the gate location.
Driveway and Security Gates
On the studio-adjacent streets and in neighborhoods like Blanco Park and Culver West, we regularly install double swing gates that are wider than a single panel and require matched operators. Security gates on converted industrial properties in the Hayden Tract are a different animal entirely: high-cycle sliding gates with in-ground loop detectors and keypad entry. Those need commercial-duty components and techs who know the difference. We do, and we carry the parts.
Pedestrian and Ornamental Gates
Most pedestrian gates in Culver City’s bungalow belt are ornamental iron from the 1930s through the 1950s. When the latch fails or the hinge post rots out at the base, we’re usually replacing hardware and resetting the post, not the gate itself. That’s the cheaper, better-looking answer, and it’s usually what we recommend.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Culver City
We’re factory-trained on the gate equipment families actually own in Culver City: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t send a tech to a job to figure out a brand for the first time. If you have a FAAC swing gate operator on a 1940s iron gate or a Viking opener on a studio lot slide gate, we know the wiring, the control board, and the common failure points without a phone call to the manufacturer. We also keep common replacement boards, hinges, and safety sensors stocked for fast turnaround on Culver City jobs.
Common Gate Installation Problems We See in Culver City Homes
- Corroded hinge posts on original wrought iron. The marine layer reaches Culver City’s bungalow core about 3-4 miles inland from Marina del Rey, and decades of salt-laden moisture work through the post base. The gate sags, drags, and eventually won’t swing at all.
- Obsolete control boards with no safety features. Many 1980s and 1990s operator boards in Culver City predate modern UL 325 entrapment protection. The boards still click, but there are no photo-eyes or edge sensors, and no replacement parts exist.
- High-cycle slide gates on studio lots and in the Hayden Tract. These gates run 24/7 and chew through residential-duty operators quickly when someone installs the wrong class of motor. We see this regularly when a residential-only tech has serviced a commercial gate.
- Post footings poured for manual gates, not automated ones. A 60-year-old footing built for a light manual swing gate holds fine until a modern operator starts cycling it hundreds of times a month. The post loosens, the gate binds, and the opener eventually overloads.
Pricing for Gate Installation in Culver City, CA
Here’s what Culver City homeowners can expect, in real numbers. A standard ornamental iron pedestrian gate installation runs $1,400-$2,800. A single driveway swing gate with a new operator, new posts, and full safety system typically runs $2,500-$4,800. A double driveway gate or a heavy sliding security gate will land at the upper end of that range or slightly above, especially if we’re running power or setting a commercial-duty operator. A studio-lot slide gate with loop detectors and keypad entry is quoted per site because the duty cycle and access control requirements define everything.
The number you’re quoted is the number you pay. We write the price down before any work begins, and we explain what it covers, line by line. No hidden charges after the fact. That’s the whole point of the Cedarwell Care Promise. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Culver City
Our Culver City crews also cover nearby communities where the same coastal air and legacy housing stock keep us busy. You’ll find us working in Marina del Rey, Inglewood, El Segundo, and Beverly Hills on a regular basis. Whether you’re just over the border in Del Rey or over in Beverlywood, we’ll bring the same written pricing, shoe covers, drop cloths, and cleanup photo.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Culver City
In most cases, you can keep the original ironwork. We reset the post footing, correct the sag, replace the hinge hardware, and fit a modern LiftMaster or FAAC operator with new safety photocells. On a 1940s Spanish Colonial Revival property off Braddock Drive, our tech found the original gate hung on a rusted hinge post that had pulled loose from its footing, with an obsolete control board and no meeting edge safety. We reset the post, fitted a modern operator, and reused the original gate. A full replacement is only necessary when the iron itself is structurally cracked or so corroded that welding new hinges won’t hold. Call (626) 649-4572 and we’ll tell you honestly which situation you’re in.
Because Culver City sits only 3-4 miles inland from Marina del Rey, and the daily marine layer carries salt-laden moisture over the city. That salt settles into hinge barrels, latch mechanisms, and the electrical contacts inside operator housings. Interior neighborhoods get the same air, and the corrosion cycle is far more aggressive than in the San Fernando Valley. We quote hardware replacement more often in Culver City because the marine layer has done the damage before the panel itself has failed.
Yes. Modern UL 325 entrapment protection requires photo-eyes or edge sensors on automated gates, and if your gate was retrofitted before those standards existed, it may not have functioning protection. We test every safety input during installation and show you how to test them yourself. If the gate reverses when someone or something breaks the beam during closing, they’re working. If it doesn’t, call us before a child or pet gets hurt. (626) 649-4572.
The duty cycle and the access control. Studio-lot and converted industrial slide gates in the Hayden Tract run 24/7 and use in-ground loop detectors, keypad entry, and sometimes intercom integration. Those gates need commercial-duty operators with higher cycle ratings. A residential-duty motor installed on that gate will fail early. We work both worlds in Culver City, so we carry the right components and we know which is which before we quote.
When the original iron is structurally compromised, when the post footings have failed and need full re-pouring, and when the existing operator predates safety standards and has no retrofit path. Add up the cost of new footings, new hinges, a new operator, and full safety edges, and sometimes the math favors a new standard-sized gate that we can install in a day. We’ll show you both numbers in writing and let you decide. (626) 649-4572.
Get a Free Estimate for Gate Installation in Culver City
If your gate is sagging, rusting, or just not opening anymore, call our Gate Repair - Culver City team at (626) 649-4572. You’ll get a live person, a straight answer, and a free estimate with a written price before any work starts. We’ll show up wearing shoe covers, lay down drop cloths where we step inside, and leave you with a photo of the clean-up. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Culver City since the Cedarwell family brought the company to Southern California in 2009.