Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Installation in Crowley, TX: What It Costs and How to Plan It Right
A new driveway gate in Crowley typically runs $2,800-$7,500 installed, depending on whether you’re adding automation, running power, and working with ornamental iron or cedar. A manual pedestrian gate starts around $900-$1,800. Every job gets a written price before we touch anything, so you’ll know the exact number before the first hole is dug. If you’re planning a gate for a home in Crowley, call (626) 649-4572 and we’ll walk through the details with you.
Fast, Reliable Gate Installation Across Crowley
Crowley sits on the southwestern edge of the Fort Worth suburban buildout, and we spend a lot of time on the residential streets off FM 1187 and Crowley Road, where HOA subdivisions from the 2000s and 2010s are now hitting the age where gates need real attention. We’re part of the Cedarwell family, independently owned and operated, and we’ve been working on gates since 2009, led by Cody Beckman. Our crews serve Crowley from our Dallas-Fort Worth metro office, which means we can reach neighborhoods like Huntwick, Winterset, and the newer developments south of I-35W without a long lead time. When you call, a live person answers around the clock. For a free estimate on Gate Installation, call (626) 649-4572.
Why Latch & Post Gate Repair Is Crowley’s Preferred Gate Installation Company
Crowley homeowners keep calling us back because we treat the inside of the house with the same care as the gate itself. Before we step through your door, we put on shoe covers and lay drop cloths on the floor. When we finish, we send you a photo of the cleanup. That’s the Cedarwell Care Promise, and it’s included on every visit, not an add-on.
We understand what Crowley’s clay soil does to gate posts. A post that looks perfectly plumb in March can be carrying a half-inch rack by August. We dig footings deep enough for Tarrant County’s shrink-swell clay, and we reinforce posts so they hold square through the wet-dry cycles. If a gate doesn’t stay right, our 365-Day Done Right Promise covers it. We make it right, no argument.
Cody Beckman leads our field teams, and everyone who shows up at a Crowley home is background-checked and uniformed. We’re factory-trained on the brands families actually have, including FAAC, BFT, Linear, and Viking. That matters when a builder-grade operator from 2008 starts acting up and needs diagnosing on the first visit.
Driveway Gate Installation in Crowley
Driveway Gate Installation in Crowley usually means one of two things: replacing a sagging builder gate from the mid-2000s, or finally automating a manual gate that was installed without power. Most ornamental iron driveway gates in Crowley’s newer subdivisions were hung between 2000 and 2015, and they’re reaching the end of their useful life in a tight band. A new double swing driveway gate in Crowley, with operators and a keypad, typically runs $4,500-$7,500. A simpler manual replacement starts around $2,800.
Replacing Builder-Grade Gates
Many Crowley HOAs specified ornamental iron driveway gates as a standard feature, and builders installed the least expensive operator to meet the requirement. Those units are now failing across whole subdivisions at the same time. We pull the old operator, set new posts with proper footings for the clay, and hang a gate that’s sized for the opening rather than forced to fit it.
Automating a Manual Gate
If your builder hung a manual gate and ran no power to the gate line, we trench the conduit, set the post footing, and install the operator, loop detector, and keypad. This is common in Crowley subdivisions built before 2010. The work includes a written price before we start, and we clean up after ourselves.
Sliding Gate Installation in Crowley
Sliding Gate Installation in Crowley works well for driveways with a slope or a short setback, which describes a lot of homes on the southwest side near the newer cul-de-sac developments. Instead of swinging out into the street or back over the driveway, a sliding gate travels along a track. In Crowley’s clay soil, the track needs a stable concrete pad that won’t heave, and the gate needs a cantilever or V-track design that tolerates some ground movement. A sliding gate in Crowley, installed with automation, typically runs $3,800-$6,800.
Track and Foundation Work
The track is the part that fails when it’s laid directly on shifting ground. We pour a reinforced concrete pad, set the track on top, and level it to the gate’s weight. Crowley’s freeze-thaw cycles are hard on poorly set tracks, so we account for the movement at installation rather than coming back to fix it later.
Automated Sliders and Safety
An automated sliding gate should have safety photocells on both sides of the opening. We install them as standard because a sliding gate, even a slow one, can pin a child or pet if the sensors aren’t there. We’ll explain the wiring and the code requirements before we start, and the written price covers the full scope.
Trusted Brands We Service in Crowley
We install and service operators from FAAC, BFT, Linear, and Viking, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Crowley homeowners, that matters because a lot of the mid-2000s builder operators in this area run discontinued Logic 5 and ET series control boards. When one of those dies, the right move is usually a full operator replacement with a current board we can actually source and support. We keep common parts stocked for Crowley jobs, so you’re not waiting on a backordered board while your gate sits open. Call (626) 649-4572 and tell us what brand is on your gate. We’ll tell you straight what a repair or replacement will run.
Common Gate Installation Problems We See in Crowley Homes
- Builder-grade operators from the 2000s fail in waves. Crowley’s HOA subdivisions went up fast, and builders installed operators with Logic 5 and ET series boards that are now discontinued. When those boards fail, a repair call often turns into a full operator replacement.
- No power or conduit to the gate line. Many newer Crowley homes were built with a manual gate and no electrical run. Adding automation means trenching from the house to the gate, which should have been done at build but wasn’t.
- Clay soil heaves gate posts out of alignment. Tarrant County’s Blackland Prairie clay expands when wet and shrinks when dry, pushing posts out of plumb seasonally. Gates bind, hinges stress, and automated operators burn out faster.
- Discontinued control boards are a local headache. We routinely pull Logic 5 and ET series boards out of mid-2000s builders’ operators in Crowley’s southwest-side subdivisions. That parts problem is specific to this era of HOA development in this corridor.
Pricing for Gate Installation in Crowley, TX
A manual pedestrian gate in Crowley runs $900-$1,800. A manual driveway gate starts around $2,800. Automated driveway gates, including operators, keypads, and safety sensors, run $4,500-$7,500 for a typical double swing gate. Sliding gates, which need a track and concrete pad, run $3,800-$6,800 installed. The main cost drivers in Crowley are the gate material, whether we need to trench a power run, and how much clay work the footings require. Every quote is written and agreed before we start. Call (626) 649-4572 for a free estimate, and we’ll give you the exact number for your gate.
We Also Serve Cities Near Crowley
Our Crowley crews also cover Gate Installation in Crowley and the surrounding area, including Burleson, Joshua, Kennedale, and Arlington. If you’re a few minutes down the road and need a gate installed or automated, we’ll come out the same way we do for Crowley: with a written price and a clean floor.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Crowley
The operator is likely running a discontinued Logic 5 or ET series control board. Those boards were common in Crowley’s 2000s HOA buildout, and when they start failing, you usually can’t just swap the board, because the part is no longer made. The right fix is often a full operator replacement with a current unit from LiftMaster, FAAC, or BFT. Call (626) 649-4572 and we’ll confirm what’s in your gate and quote the replacement in writing, free.
Yes, and we do this often in Crowley, especially in subdivisions built before 2010 where no power was run to the gate line. We trench a new conduit run, set a proper post footing, install the operator and loop detector, and add a keypad. The written price covers the full scope before we start. Call (626) 649-4572 for a free estimate.
Crowley sits on Blackland Prairie clay that expands in wet spring weather and shrinks during dry summer heat. The ground movement heaves gate posts out of plumb, which throws the gate out of alignment and stresses the hinges and operator. The fix is deeper footings and reinforced posts, not just re-aligning the gate once a year. We’ll look at your specific gate and tell you what’s needed.
We’re factory-trained on FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Crowley homes with older builder-installed operators, we can typically recommend a current replacement that works with your existing gate hardware. We keep common parts stocked for faster turnaround.
Yes. Safety photocells stop the gate if a child, pet, or vehicle is in the opening, and they’re required on automated gates. We install them as standard on every automated gate job in Crowley, and the written price includes them. If your gate doesn’t have them, call (626) 649-4572 and we’ll add them for you.
Call Latch & Post Gate Repair for Gate Installation in Crowley
We know what Crowley’s clay soil, HOA gates, and 2000s builder operators throw at a gate installation. We write the price before we start. We lay drop cloths and wear shoe covers inside your home. We send a photo of the cleanup before we leave. And if something isn’t right within 365 days, we make it right. Call (626) 649-4572 for a free estimate on your gate installation. Cody Beckman leads the team, and a live person answers your call, any hour.