Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Cibolo
New gate installation in Cibolo runs $1,800 to $7,500 for a standard ornamental iron driveway gate, with electric operators adding $1,200 to $3,800 depending on the motor and control package. Most jobs take one to two days once materials are on hand, and we give you a written price before any work starts. If you’re in Saddle Creek, Turning Stone, CrossVine, or any Cibolo subdivision, call (626) 649-4572 and we’ll schedule a free measure and walkthrough. We live with the same Blackland Prairie clay under our feet, so we plan every post and footing around what Cibolo’s soil actually does.
Why Latch & Post Gate Repair Is Cibolo’s Preferred Gate Installation Company
Cibolo is not a quick stop for us. We spend real time here because the gate stock is consistent: post-2000 HOA-governed subdivisions, almost all of them with ornamental iron specified in the CC&Rs. That means our Gate Installation team knows what the Saddle Creek finish card looks like and which bronze tone CrossVine expects before we quote a single hinge. Cody Beckman has built the crew around one rule: know the subdivision’s requirements before the first hole gets dug.
Our technicians are background-checked and uniformed. They lay drop cloths before walking onto finished concrete or flagstone, they put on shoe covers before stepping inside for a panel check, and they send you a photo of the cleanup before leaving. That routine matters in Cibolo because so many gates sit close to front doors, courtyards, and finished garage entries. Floors stay clean. Pets stay safe. Kids can nap through the work. We use quiet tools where we can, and we schedule around nap time if you tell us it matters.
Live phone coverage is part of the deal. A person answers when you call (626) 649-4572, even at 2 a.m. when the wind has your gate banging. We coordinate Cibolo scheduling from our San Antonio dispatch office, and a local crew handles the work on site. Every quote is written. Every job carries the 365-Day Done Right Promise. If the install isn’t right a year later, we make it right. No argument, no fine print.
Gate Installation Services in Cibolo
Gate Installation Services in Cibolo start with the ground, not the gate. The Blackland Prairie vertisol clay under most Cibolo lots swells after rain and shrinks in drought, sometimes moving a post an inch or more out of plumb in a single season. So we dig deeper footings than the old developer standard, set stainless anchor plates where the soil is aggressive, and choose post sections that can take the movement without binding the gate. That is the difference between a gate that swings clean for fifteen years and one that drags on the concrete by year three.
Driveway and Double Gates
Driveway gates in Cibolo are almost always ornamental iron or powder-coated steel matched to the house’s fence line. A single swing or sliding driveway gate typically runs $2,200 to $6,800 installed, depending on width, finish, and whether you are adding an operator. Double gates add 35 to 50 percent to the panel cost. In Saddle Creek and Turning Stone, we verify the exact powder-coat sheen in the CC&R before ordering, because a bright zinc hinge on a flat-black gate gets flagged at inspection even if it works perfectly.
Pedestrian and Courtyard Gates
Pedestrian gates in Cibolo run $900 to $3,200 installed, with the low end covering a standard 4-foot ornamental iron gate with a post-mounted latch. Many Cibolo homes have courtyard entries where the gate passes close to a stucco wall or finished paver path. We check swing clearance, hinge throw, and latch geometry before mounting anything, and we protect the path with drop cloths while working. If the courtyard gate needs a closer or a keypad lock, we add that to the quote in writing before we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Cibolo
Electric Gate Installation in Cibolo pairs your gate with an operator sized for the panel’s weight and the soil it swings over. A LiftMaster or DoorKing operator install runs $1,200 to $3,800, including arms, brackets, safety photo-eyes, and control wiring. We run dedicated circuits where code requires, set travel limits so the motor never fights a sagging panel, and test the auto-reverse at least twice before we call the job done. In Cibolo, where a shifting post can bind a gate mid-cycle, the motor is only as good as the geometry underneath it.
Operators and Controls
We install Viking, Ghost Controls, DoorKing, and Elite operators, and we stock common parts for those brands so Cibolo homeowners aren’t waiting on a freight order. The operator gets mounted to a reinforced post section, never to a decaying powder-coat tube. Travel limits, force settings, and photo-eye alignment are set on site, and we hand you the remote programming instructions before we leave. If you want a keypad, intercom, or vehicle sensor added, we quote it up front in the written price.
Safety Edges and Photo-Eyes
Photo-eyes are not optional on a new Cibolo electric gate. They are required safety equipment, and we mount them 6 inches off the finished surface, not at whatever height the old developer left. We also add a pressure safety edge if you have small kids or pets who might be near the gate’s pinch point. The auto-reverse gets tested with a physical obstruction, not just a settings check. Your written quote includes every safety component, and the price you sign is the price you pay before any work begins.
Trusted Brands We Service in Cibolo
We are factory-trained on the brands Cibolo homes actually carry: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a Ghost Controls board and a FAAC board do not troubleshoot the same way, and guessing wastes your afternoon. We keep common parts for Viking, Ghost Controls, and DoorKing on the truck, so a Cibolo repair or install usually finishes the same visit. When a part is not on the shelf, we order it from the brand’s direct channel, not a generic online marketplace. And we stand behind every install with the 365-Day Done Right Promise.
Common Gate Installation Problems We See in Cibolo Homes
- Heaved hinge posts from Blackland Prairie clay. Vertisol clay swells after rain and shrinks in drought, pushing the hinge post up and tipping the gate out of plumb. The first sign is usually a latch that no longer catches or a gate that scrapes the concrete mid-swing.
- Powder-coat failure at weld seams and hardware penetrations. Gates installed between 2005 and 2020 are hitting fifteen to twenty years old, and the finish starts chalking and lifting first where screws and hinges break the surface. Moisture gets inside the tubing and rust weakens the frame from within.
- HOA finish violations from mismatched hardware. In Saddle Creek, Turning Stone, and CrossVine, a zinc hinge or a slightly wrong bronze tone on a replacement part will get flagged even when the gate works. We keep finish sample cards for the major Cibolo HOAs on the truck.
- Operator overload from gate misalignment. When a post heaves even half an inch, the operator has to push harder to move the same panel. That extra strain burns out boards and strips gears. We see it most in the first two wet-dry cycles after a gate is installed on an undersized footing.
Pricing for Gate Installation in Cibolo, TX
A standard ornamental iron pedestrian gate in Cibolo runs $900 to $3,200 installed. A single driveway gate runs $2,200 to $6,800, and a double gate adds 35 to 50 percent to the panel cost. Electric operators run $1,200 to $3,800 on top of the gate itself, depending on motor size and control features. The widest price swings come from three things: gate width, powder-coat finish matching, and how deep we need to go to get a stable footing in Cibolo’s expansive clay. You get the exact number in writing before we touch anything, and the price on that page is the price on the final invoice. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Cibolo
Our Cibolo crews also cover Schertz, Universal City, Converse, and New Braunfels. If your home is just across the Cibolo Creek line, you’re still in our service area. See more about our work across the region at Gate Installation in Cibolo, or call (626) 649-4572 and we’ll confirm a time that works.
Serving Cibolo, TX - Our Local Coverage Area
We’re based in the Cibolo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Cibolo
Cibolo sits on the Blackland Prairie, where expansive vertisol clay swells dramatically after rain and shrinks and cracks during drought. That cycle physically lifts and drops the soil around a gate post, and the effect is stronger on the deep clay of Guadalupe County than on the rockier ground just west into Bexar County. We see posts move a full inch out of plumb in a single wet-dry cycle in Saddle Creek and Turning Stone. The fix is a deeper footing and a stainless anchor plate, and we spec both on every new Cibolo install. Call (626) 649-4572 for a free site check.
Almost certainly yes. These subdivisions specify gate height, finish color, and hardware type in their CC&Rs, and the architectural review committee will flag a gate that does not match the approved palette even if it functions fine. We can help you assemble the submittal: panel dimensions, powder-coat finish code, hinge spec, and operator placement. Local crews who know the standards save you the cost of a redo. We’ll also verify the finish against the subdivision’s sample card before ordering. Call (626) 649-4572 and we’ll walk you through the approval steps.
316 stainless steel hinges, latch components, and fasteners hold up best against Cibolo’s humidity and rain. Galvanized hardware is cheaper but starts rusting at the cut edges within a few seasons, and painted steel fares worse once the finish scratches. We spec 316 stainless on every new install and keep it on the truck for repairs. The added cost is usually $40 to $120 per gate, and it’s the difference between hardware that lasts twelve years and hardware that seizes in four. Estimates are free at (626) 649-4572.
The post has usually moved, not the panel. In Cibolo’s clay, the hinge post heaves or tilts and the gate follows it down, so the panel looks straight while the whole assembly leans. We measure the post with a level and check the gap at the latch side. If the post has moved, the fix is to reset it in a deeper footing with a stainless anchor plate, then re-hang the gate and reset the operator travel. A braced hinge or a welded tick will not fix a moving post. Call (626) 649-4572 for a professional assessment.
Yes. Photo-eyes are mandatory safety equipment on every new electric gate install we do, no exceptions. We mount them paired on either side of the gate opening, 6 inches off the ground, and we test the auto-reverse with a real obstruction before we call the job finished. If you have small kids or pets, we also add a pressure safety edge that stops the gate the moment it touches anything. Your written quote includes every safety component. Call (626) 649-4572 for a free estimate on a compliant install.
We were called to a Saddle Creek driveway gate that had started dragging on the concrete and tripping its LiftMaster operator mid-cycle. The hinge post had heaved about an inch out of plumb in the Blackland clay, so we excavated, poured a deeper footing with a stainless anchor plate, replaced the galvanized hinges with 316 stainless, and re-shot the swing gate geometry before resetting the operator travel. The lift arm stopped over-torquing, and the gate cleared the slab through the next wet-dry cycle. That is the job we do: fix the ground under the gate, not just the gate itself.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the work we focus on. If your Cibolo gate is sagging, scraping, or due for a full replacement, call (626) 649-4572. A live person answers, a written price comes before any work starts, and the 365-Day Done Right Promise covers the job for a full year after install.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Cibolo families with gate installation and repair since 2009.