Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Converse
Gate installation in Converse, TX runs $1,200 to $7,500 for most residential jobs, with the typical driveway gate landing between $2,300 and $4,800 depending on material, automation, and post work. That’s a realistic number for this specific market, where Blackland Prairie clay and 2000s builder-grade footings mean post preparation often matters more than the gate itself. Our Gate Installation team serves every subdivision off FM 1516, Judson Road, and Toepperwein, and we answer live when you call (626) 649-4572. A written price comes before any work starts, so the number you approve is the number you pay.
Why Latch & Post Gate Repair Is Converse’s Preferred Gate Installation Company
Converse homeowners keep calling us for one reason that has nothing to do with marketing: we understand what 2000s volume-built gates actually fail on. Whole streets off Judson Road share the same shallow post footings, the same cedar frames, and the same failing hardware. When one gate on a block starts dragging, the neighbors’ posts are usually already tilting. Cody Beckman and our technicians see this pattern weekly in subdivisions like Escondido North, Cielo Vista, and the neighborhoods wrapping around Converse North Park.
We work to the Cedarwell Care Promise on every install. Shoe covers and drop cloths go down before we step inside for opener setup or keypad wiring. We take a photo of the clean-up before we leave. “Clean up like it is our own home” isn’t a slogan for us, it’s the C in C.A.R.E., and our Converse customers tell us it shows. A written price is delivered before any work begins, and every job carries the 365-Day Done Right Promise.
Response time to Converse is typically next-scheduled-day for installations that need measuring and material ordering, and same-week for most straightforward gate replacements. Emergency repairs can often be dispatched within a few hours. Call early, and we can usually have someone out the same day to at least stabilize a failed gate.
Driveway Gate Installation in Converse
Driveway gate installation in Converse usually means one of two things: replacing a broken builder-grade wooden gate, or adding automation to a driveway that has never had it. Most of the homes we see were built between 1998 and 2012 with basic cedar privacy packages, and those gates are hitting the end of their functional life now. A new manual driveway gate in Converse typically runs $1,200 to $3,200. An automated swing gate with opener, safety sensors, and keypad runs $3,400 to $6,800. The spread depends on gate width, material choice, and whether we’re working with existing posts or resetting them.
Automating a Gate That Was Installed Manual
The build-out near Randolph AFB happened fast, and most original gates went in without conduit, without a power run, and without a loop detector. Adding a Linear or Ghost Controls opener to an existing manual gate in Converse means running new power, often through lawn that has to be trenched carefully. We handle the entire power run, the safety edges, and the control wiring, and we quote the full number before we dig.
Replacing a Builder-Grade Gate
When the original cedar gate has hinge pull-out or post rot at ground level, patching rarely makes sense. Those original footings were often shallow, and the wood at the base has been sitting in damp clay for two decades. We pull the old posts, set new ones deeper in concrete, and hang a properly framed gate that won’t sag the way the builder version did.
Sliding Gate Installation in Converse
Sliding gate installation in Converse is the right choice for lots with wider driveways, slopes, or drainage swales that would make a swing gate fight gravity. Many Converse driveways have the standard two-car width, but corner lots and extended driveways off Judson Road and FM 1516 often call for a slide rather than a swing. A manual sliding gate in Converse runs $1,800 to $3,800. An automated slide with a rack and pinion operator, safety photocells, and a keypad runs $4,500 to $7,500. Sliding gates need a concrete track or cantilever base, and we size that for the seasonal movement of Blackland Prairie clay.
Rack and Pinion Retrofit
On a slide gate, the rack and pinion drive has to be mounted straight, with a pad that won’t shift when the clay swells in spring and shrinks in August heat. We pour a proper concrete base for the operator, rather than bolting it to whatever was there before. That’s the difference between a gate that runs true and one that binds every June.
When the Driveway Makes a Swing Gate the Wrong Fit
Some Converse driveways pitch upward toward the house, and a double swing gate would scrape or require ugly clearance cuts. A slide gate rides parallel to the fence line instead, so grade matters less. We’ll tell you honestly which style fits your driveway, even when the answer is simpler or cheaper than you expected.
Trusted Brands We Service in Converse
We install and service operators from Linear, Viking, Ghost Controls, and DoorKing, among others. For sliding gates, we commonly mount Linear and Viking rack and pinion drives. For swing gates, Ghost Controls and DoorKing are frequent picks for Converse driveways because they handle Texas summer heat well. We keep common parts stocked local to Converse, so when we diagnose a bad control board or a failed safety sensor, we usually have the replacement on the truck instead of ordering and waiting.
Common Gate Installation Problems We See in Converse Homes
- Post heave from clay soil. Blackland Prairie clay swells with spring rain and shrinks in summer drought. Shallow 2000s footings can’t hold against that cycle, so posts tilt and gates bind within a few seasons. We always assess post depth and soil condition before quoting an installation in Converse.
- Missing conduit for gate automation. When the original builder installed a manual gate, they usually didn’t run power. Adding an opener later means trenching, conduit, and a hard-wired or solar power solution. We quote this as part of the job, not as a surprise add-on.
- Whole-subdivision synchronized failures. Tracts off FM 1516 and Judson Road used nearly identical materials and footing depths. When one gate on a block starts dragging, we typically find the neighbors’ posts already tilting and weeks away from the same failure.
- Builder-grade cedar frames and hardware. The original gates used minimal post depth, basic hinges, and latch alignment that worked on day one but not for the life of the house. We see hinge pull-out and latch misalignment in matched patterns across entire streets in Converse.
Pricing for Gate Installation in Converse, TX
A manual replacement gate in Converse runs $1,200 to $3,800 depending on material and size. Automating an existing gate runs $2,900 to $5,200 when trenching and new conduit are needed. A full automated driveway gate, installed with new posts and proper footings, falls between $3,400 and $7,500. The variables are width, wood versus steel frame, swing versus slide, and the condition of the ground we’re setting posts into. Every quote we write includes the complete scope: posts, hardware, operator, safety sensors, power run, and cleanup. You see the number before you agree to anything, and nothing gets added after the fact. Call (626) 649-4572 for a free measure and written estimate.
We Also Serve Cities Near Converse
Our Converse crew regularly works in Gate Installation in Converse and the surrounding communities: Universal City, Schertz, Cibolo, and the northeast corner of San Antonio. If you’re just over the line but still need the same care and written pricing, we’ll come to you. The soil, the builder patterns, and the gate failures don’t stop at the city limit sign.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Converse
Converse’s housing boom happened in concentrated tract phases in the early and mid 2000s, driven by military families near Randolph AFB. Volume builders used nearly identical cedar gate packages with shallow footings and basic hardware across entire subdivisions. Those gates now hit the 15-to-20-year failure threshold together, so block after block needs post resets and gate replacements at roughly the same time. If your neighbors are replacing gates, yours is probably close behind. Call (626) 649-4572 and we’ll assess yours honestly.
Yes, in most cases we can. The usual obstacle is missing conduit and power from the original 2000s build. We handle the full retrofit: trenching, conduit, power run, operator mounting, safety sensors, and keypad. We’ll also check the hinge posts and framing before recommending automation, because a gate that’s already sagging will tear up a new opener. The written quote covers everything you need.
A swing gate pivots on hinges and opens into the driveway or toward the house. A slide gate rides parallel to the fence line on a track or cantilever base. Converse driveways with a pronounced slope or limited clearance in front of the gate usually do better with a slide. Flat lots with standard driveways often prefer a swing for its lower cost. We’ll look at your specific driveway before recommending either one.
The hinges were probably never the real problem. In Converse, sagging usually comes from the posts tilting as the Blackland Prairie clay swells and shrinks through wet and dry cycles. If the posts move, new hinges just transfer the stress to the gate frame. The fix is resetting the posts deeper in concrete, sometimes with wider footings. That’s standard work for us here, and it’s written into the price before we start.
Yes. Automatic gate operators fall under UL 325 entrapment protection rules, which require safety sensors, reversing edges, or both, so the gate doesn’t crush a child, pet, or vehicle that enters its path while moving. We install compliance sensors on every automated gate we put in, and we test them before we leave. A gate without working entrapment protection is dangerous, and we won’t leave one running that way. Call (626) 649-4572 if your existing opener fails a safety check.
On a block off FM 1516, we rebuilt three neighboring builder-grade cedar gates that all started dragging within the same month. The original 2000s footings were shallow on the Blackland Prairie clay, so we reset each hinge post deeper and installed LiftMaster swing gate operators with safety photocells and keypad entry on the two driveways that wanted automation. For the wider slide gate, we mounted a rack and pinion drive and poured a proper concrete pad so the operator wouldn’t fight the seasonal soil movement. That’s the kind of Converse-specific work we do every month.
Call Latch & Post Gate Repair at (626) 649-4572 for a free estimate on any gate installation in Converse. A live person answers, day or night.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Converse and the northeast San Antonio area.