Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Carrollwood
A new driveway or sliding gate in Carrollwood typically costs between $3,400 and $9,800 installed, depending on the gate’s width, material, and whether we’re replacing an existing operator or starting from scratch. Most installations here take one to two days on site, and you’ll have a written price in hand before we order a single part. If you’re weighing a gate after a storm, a break-in attempt, or just years of watching an old Apollo unit limp along, call us at (626) 649-4572 and we’ll walk through what makes sense for your home.
Carrollwood’s housing stock is specific. Large single-family homes on quarter-acre-plus lots, most built between the mid-1970s and mid-1990s inside deed-restricted HOA communities. That means we’re not installing gates on fresh suburban lots with clean utility maps. We’re working around decades-old concrete footings, undocumented conduit runs, and ornamental brick pilasters at community entrances that were poured during original construction. Our Gate Installation team knows how to quote that job accurately, and how to build a gate that will hold up through the next thirty summers of Tampa Bay lightning and wind.
Why Latch & Post Gate Repair Is Carrollwood’s Preferred Gate Installation Company
We focus on gates. Not fences, not general handyman work, not a little bit of everything. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why Carrollwood homeowners call us when a swing gate sags or a slide gate jumps its track.
Latch & Post is part of the Cedarwell family, independently owned and operating since 2009. Our technicians are background-checked, uniformed, and factory-trained on the brands Carrollwood families actually own: LiftMaster, Viking, Ghost Controls, and DoorKing among them. When we step onto your property, we follow the Cedarwell C.A.R.E. values: Clean up like it’s our own home. Ask before we move or touch anything. Respect your time and quiet hours. Explain the price before the work. That means shoe covers and drop cloths on every visit, a photo of the clean-up before we leave, and quiet tools when kids are asleep.
Every installation we do in Carrollwood is backed by the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print.
Driveway Gate Installation in Carrollwood
Driveway Gate Installation in Carrollwood usually involves a swing or slide gate across a wide driveway entrance, often set between existing masonry columns that have been standing since the 1980s. The cost for a standard single swing gate runs $3,800 to $7,200, while a double swing gate or a sliding gate with an operator typically lands between $5,500 and $9,800. The exact number depends on gate width, material, and whether the old post footings can be reused or need to be re-poured.
Working Around Old Footings, Not Against Them
One of the most common surprises in Carrollwood is the condition of what’s under the gate. Footings poured in saturated Hillsborough County soil during the 1980s often crack at the hinge post after enough storm seasons. When we install a new driveway gate, we inspect the existing concrete before we quote. If the footing is sound, we use it. If it’s not, we bust it out, pour fresh, and set the post so the gate swings true from day one.
Considering a Solid-Infill Panel? Read This First
Solid-infill swing gates look substantial and private, but they act like sails in Carrollwood’s wind exposure. A gate that catches enough wind will torque the operator arm, strip the rack and pinion, or overload the gearbox. If you want the solid look, we’ll spec a heavier operator and reinforce the hinge post accordingly. It costs a little more up front and saves a rebuild after the first strong storm.
Sliding Gate Installation in Carrollwood
Sliding Gate Installation in Carrollwood is common on lots where a swing gate would block the driveway or where space is tight between the house and the property line. A new sliding gate with a Ghost Controls or DoorKing operator typically runs $4,900 to $8,600 in this area. The job includes the track or cantilever system, the gate panel, the operator, safety photocells, and a keypad or remote entry if you want one.
Cantilever vs. Track Systems on Carrollwood Lots
Carrollwood properties near Lake Carroll or the area’s retention ponds often have drainage issues at the gate line. A ground-track sliding system in standing water will rust and bind within a few seasons. Where water pools, we recommend a cantilever slide system that carries the gate above the ground, or we grade the track area so water moves away. Either way, the steel frame and hinges get a rust-resistant treatment before the gate goes in.
Retrofitting an Operator to an Existing Slide Gate
If your HOA community entrance or your own driveway already has a sliding gate but the operator is dead, we can often save the gate panel and replace only the operator and safety sensors. That runs $2,600 to $4,800 in Carrollwood. The catch in this area is age: many of these gates run on early-1990s Apollo or Elite units for which parts no longer exist. When that’s the case, a full operator swap is the only honest answer, and we’ll show you the dead board and the replacement quote side by side.
Trusted Brands We Service in Carrollwood
Our technicians train on the equipment Carrollwood homeowners and HOA boards actually use: Linear, Viking, Ghost Controls, and DoorKing, plus LiftMaster, FAAC, BFT, and Mighty Mule. We stock common parts and operators locally for Carrollwood jobs, which means less waiting on a warehouse shipment when your gate is down and your driveway is blocked. If a control board fries in a summer surge, we’d rather have the replacement on the truck than tell you it’ll be a week.
Common Gate Installation Problems We See in Carrollwood Homes
- Hinge-post failure in saturated ground. Footings poured in the 1980s give way at the hinge post during storms, so the gate sags even though the panel itself is fine. We pull the post, re-pour the footing, and reset the gate straight.
- Wind damage on solid-infill swing gates. Carrollwood’s exposure turns solid panels into sails. The operator arm gets torqued, the rack strips, or the gearbox overloads. Fixing it right means a heavier operator and a reinforced post, not just a replacement arm.
- Lightning-surge damage on old operators. The greater Tampa Bay area leads the continental US in lightning strikes, and Carrollwood’s automated gates take repeated hits every rainy season from June through September. Control boards and keypads on 30-year-old Apollo or Elite units get cooked, and replacement parts no longer exist. The job becomes a full operator swap.
- Rust at the hinges from standing water. Low-lying sections near Lake Carroll and the retention ponds expose gate hardware to standing water. Steel frames rust at the hinges, the gate binds, and eventually the hinge tears out. Rust-resistant coating and proper drainage at installation prevent most of it.
Pricing for Gate Installation in Carrollwood, FL
Here’s what we’re seeing in Carrollwood right now. A single driveway swing gate with a new operator and basic keypad runs $3,800 to $7,200. A double swing gate or a sliding gate lands between $4,900 and $9,800. Retrofitting a new operator onto an existing gate runs $2,600 to $4,800. A full pedestrian gate install with a lock and self-closing hinge runs $1,400 to $2,800. County permitting and UL 325 safety equipment are always included in our written quote, not added on at the end. Call (626) 649-4572 for a free estimate, and you’ll have the exact number in writing before any work starts.
We Also Serve Cities Near Carrollwood
While this page is focused on Carrollwood, our crews also handle Gate Installation in Carrollwood neighboring markets across the region. We take jobs in Tampa, Jacksonville, Orlando, and Miami, coordinating scheduling and dispatch from our South Florida office so you get a consistent team and the same written-price, shoe-covers, cleanup-photo routine no matter which city you call from.
Serving Carrollwood, FL - Our Local Coverage Area
We’re based in the Carrollwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Carrollwood
Most storm-damaged operators in Carrollwood need full replacement, not repair, because many HOA communities here still run on early-1990s Apollo or Elite units for which replacement control boards and parts no longer exist. When lightning cooks the board, there’s often nothing to repair. We’ll show you the dead unit, quote a new LiftMaster or DoorKing operator with current UL 325 safety sensors, and handle the county-required documentation. Call (626) 649-4572 for an exact quote on your specific gate.
We size the operator for the wind load, not just the gate’s weight, and we either reinforce the hinge post or replace it entirely if the old footing is cracked. For solid-infill panels, that means an upgraded gearbox and a post that’s set deeper in fresh concrete. For slide gates near retention ponds, we use cantilever systems or regrade the track so water drains away from the steel. The goal is a gate that opens the same way after a named storm as it did the week we installed it.
Every automated gate has a manual release mechanism, usually a pull handle or keyed release near the operator. Pull it to disengage the motor from the gate, then push or slide the gate manually. If the gate is a heavy solid-infill swing panel, do not force it alone in high wind; two people are safer, and a blocked driveway in a storm is a job for our crew. Call us at (626) 649-4572 and a live person answers, 24/7.
Yes. Carrollwood is unincorporated Hillsborough County, not City of Tampa, so every new gate and replacement operator must pass Hillsborough County Development Services permitting and be documented to current UL 325 entrapment-protection standards. Contractors who quote under City of Tampa rules often get this wrong. We pull the permit, schedule the inspection, and provide the documentation as part of the installation.
Yes, a solar opener can work, but Carrollwood’s rainy-season cloud cover and frequent lightning surges make battery sizing and surge protection critical. A solar setup on a shaded lot near mature oaks may not keep up in summer. We spec the panel and battery for your specific exposure, and we always install surge protection on the control board. Call (626) 649-4572 and we’ll tell you straight if solar makes sense for your gate.
Call Latch & Post for Gate Installation in Carrollwood
We were called into a home off Carrollwood Village’s Fairway Green area after a summer storm. The early-1990s Apollo operator on a solid-infill swing gate had fried its control board, and the steel frame was rusted at the hinges from standing water near a retention pond. We pulled the dead unit, filled the old post footing with new concrete, reinstalled the gate on a fresh hinge post with sag correction, and fitted a LiftMaster operator with safety photocells, keypad entry, and a UL 325 entrapment reversal loop detector so the gate passed county inspection. That’s a typical Carrollwood job for us, and we’d be glad to do the same for your home.
Call (626) 649-4572 for a free estimate on your gate installation. A live person answers, day or night. You’ll get a written price before any work begins, shoe covers and drop cloths on every visit, and a photo of the clean-up before our technician leaves. If it isn’t right, the 365-Day Done Right Promise says we make it right.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Carrollwood.