Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Brooklyn
A new gate for a Brooklyn brownstone or row house typically runs between $2,800 and $9,500 installed, depending on whether we are matching historic iron profiles or hanging a modern steel or aluminum gate. That figure includes the written price you receive before any work starts, along with the post work, hinges, and hardware. If you are calling about a garden-level stoop gate on a landmarked block in Brooklyn Heights or Park Slope, the number also needs to account for the LPC Certificate of No Effect that comes before we touch anything. Call (626) 649-4572 and we’ll walk you through what your specific block and gate will actually require.
Most Brooklyn gate installations take one day on site once materials are ready. A custom fabrication to match original ironwork adds one to two weeks. We serve every neighborhood from Williamsburg to Bay Ridge to Sheepshead Bay, and we have spent enough time on the row-house blocks of Park Slope, Carroll Gardens, and Crown Heights North to know that “gate installation” here rarely means a simple off-the-shelf panel.
Why Latch & Post Gate Repair Is Brooklyn’s Preferred Gate Installation Company
Brooklyn homeowners keep calling us back because we understand what hangs on the front of a 1890s brownstone. A stoop gate here is not a generic steel frame. It is often original flat-bar wrought iron that the Brooklyn homeowner is legally obliged to preserve when the block sits inside a Landmarks Preservation Commission district. Our crew knows which iron profiles pass an LPC Certificate of No Effect, and which modern square-tube substitutes will get a stop-work order taped to your handrail. That local working knowledge is the difference between a one-day swap and a two-month landmark headache.
We have held a strong local reputation since 2009 as part of the Cedarwell family of independent gate specialists. The work is led by Cody Beckman, and every technician who comes to Brooklyn is background-checked, uniformed, and factory-trained on the equipment families actually own here, with Brooklyn Liftmaster service a core specialty, plus FAAC, DoorKing, Elite, Viking, and Ghost Controls. When you call, a live person answers. Not a voicemail, not a callback queue. Nights and weekends included.
And the way we leave your house matters as much as the gate itself. Shoe covers go on before we step inside your vestibule. Drop cloths go down under every work area. When the job is done, we photograph the clean-up before we leave and hand you the price in writing before we start. The 365-Day Done Right Promise backs the whole thing: if the installation is not right, we make it right. No argument, no fine print.
Gate Opener Installation in Brooklyn
Gate opener installation in Brooklyn usually means retrofitting a modern automatic operator onto an iron stoop gate or rear-yard passage gate that was hung long before anyone thought about keypad entry or safety photocells. We install LiftMaster, FAAC, DoorKing, Elite, Viking, and Ghost Controls operators, and the work typically runs $1,500 to $4,200 depending on whether we are adding a full keypad and intercom or just an opener and remote. You will see the exact number in writing before any work begins.
Retrofitting an Operator on Historic Iron
Original wrought iron from 1890 weighs more than it looks. A modern opener sized for lightweight steel will stall out on a century-old panel. We size the motor to the swing weight of the actual gate, then mount the opener so the historic streetscape is not altered. In an LPC district like Brooklyn Heights, the motor, arm, and control box need to sit where the Commission will not object. We handle that planning as part of the quote.
Safety Edges and Photocells
Every automatic gate we install in Brooklyn gets safety photocells and force-sensing controls that stop and reverse the gate if a child or pet is in the swing path. Cody Beckman’s crew tests the obstruction response before we call the job done. If the gate refuses to hold its limit settings after a week or two, we come back and correct it under the 365-Day Done Right Promise.
Gate Fabrication in Brooklyn
Gate fabrication in Brooklyn starts at $3,200 for a pedestrian gate built to the dimensions of your particular stoop or side passage, and runs upward from there based on whether we are matching flat-bar wrought iron period profiles or building contemporary steel or aluminum. A double driveway gate in neighborhoods like Dyker Heights or Marine Park typically lands between $6,000 and $14,000. Because so many Brooklyn homes sit on landmarked blocks with hundred-year-old ironwork, a meaningful share of our fabrication work is historical matching, not just new construction.
Matching Original Brooklyn Ironwork
When a below-stoop garden gate on a Carroll Gardens brownstone has rusted through, you cannot simply bolt in a modern panel. The LPC expects a like-for-like profile: same bar spacing, same scroll detail, same finish. We measure the surviving rails and pickets, identify the original pattern, and fabricate a replacement in the same flat-bar wrought iron style. The result holds a Certificate of No Effect and keeps the block’s historic streetscape intact.
Contemporary Gates for Converted Lofts and New Condos
Williamsburg, DUMBO, and Greenpoint add a second Brooklyn market: converted industrial buildings and new condo developments that need steel or aluminum courtyard and loading-dock gates. These jobs are measured, ordered, and scheduled rather than done same-day. We provide a free measure and a written price, then set a fabrication and install date that works for the building’s schedule.
Trusted Brands We Service in Brooklyn
We are factory-trained on the gate equipment Brooklyn residents actually own, including LiftMaster, FAAC, DoorKing, Elite, Viking, and Ghost Controls. Because we focus exclusively on Gate Repair - Brooklyn rather than general home repair, we keep common control boards, remotes, and safety edges in local stock for faster turnaround on local service calls. When your existing Viking or Ghost Controls operator has failed on a rear-yard gate in Bay Ridge, we can usually source the exact replacement board without a week-long wait. You will know the brand-compatible part and its installed price before we order a single component.
Common Gate Installation Problems We See in Brooklyn Homes
- Heaved bluestone posts on attached row houses. Freeze-thaw cycling along the Gowanus and Upper New York Bay pushes masonry posts out of plumb after a few decades. A gate that looks like a sag correction is often a failed post footing that needs to be re-set before a new gate can hang square.
- Rusted-solid century-old barrel hinges. Salt-laden air off the harbor accelerates corrosion on original cast and wrought iron. We regularly see hinges on 1880s-1920s stoop gates that have seized completely and must be cut out and replaced with reproduction hardware.
- Obsolete control boards on 1970s and 80s operators. Legacy operators on older stoop and passage gates often accept no modern replacement parts. Retrofitting a new LiftMaster or FAAC head is usually possible, but it is cheaper to replace the gate entirely when the iron frame has cracked and the hinge post is heaved.
- Narrow side-passage clearances. Brooklyn rear yards are frequently reached through a slim passage between row houses. We fabricate gates to exact passage widths in Crown Heights and Bed-Stuy, and the written quote always accounts for the tight swing radius before any metal is ordered.
Pricing for Gate Installation in Brooklyn, NY
You should know real numbers before you call. A standard pedestrian gate installation in Brooklyn runs $2,800 to $6,500. A double driveway gate runs $6,000 to $14,000. Automatic opener installation adds $1,500 to $4,200. Custom fabrication to match original Brooklyn ironwork starts around $3,200 and climbs with scrollwork and period hardware. The factors that move the number: whether the block sits in an LPC district and requires a Certificate of No Effect, whether the existing post needs a new footing, and whether we are matching historic flat-bar profiles or hanging contemporary steel. Call (626) 649-4572 for a free estimate and a written price before anything begins.
We Also Serve Cities Near Brooklyn
Our Gate Installation team works across the five boroughs and surrounding areas. We serve Manhattan, Staten Island, the Bronx, and Mount Vernon, and we also cover Gate Installation in Brooklyn neighborhoods from Greenpoint to Gerritsen Beach. Dispatch and scheduling for all of these areas are coordinated from our New York City office, but every crew that shows up at your door works locally and knows the block.
Serving Brooklyn, NY - Our Local Coverage Area
We’re based in the Brooklyn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Brooklyn
Yes. Even when the new gate matches the original iron exactly, a block inside an LPC historic district like Brooklyn Heights, Park Slope, or Carroll Gardens requires a Certificate of No Effect before the work can legally proceed. We prepare the filing, confirm the surviving profiles, and submit the drawings. Call (626) 649-4572 and we will tell you whether your specific block is landmarked and what the approval timeline looks like.
It depends on the condition of the hinge post. If the post is sound, we can often re-hang the existing gate with new reproduction barrel hinges and have it swing cleanly again. If decades of freeze-thaw have pushed the masonry post out of plumb, a new footing is the honest fix, and sometimes that makes replacement the cheaper overall answer. We will show you both options in writing before you decide.
Yes, as long as the gate’s swing weight and the surviving iron frame are in workable condition. In Park Slope, we replaced a seized garden entry with a new flat-bar wrought iron gate and added a LiftMaster operator with safety photocell and keypad entry, all while the block stayed true to its historic streetscape. We size the motor to the actual gate and route the wiring so the landmark visuals stay untouched. Call us for a written quote specific to your stoop or passage.
Rust. Salt-laden air from Upper New York Bay and the Gowanus works into century-old barrel hinges until the iron swells and binds. On some blocks the gate seizes within a single winter. The repair is usually a hinge replacement with reproduction hardware, not a new gate. Call (626) 649-4572 and we will send a technician who knows what an 1890s hinge looks like.
Yes. When an original below-stoop gate or rear-passage gate is too corroded to save, we measure the surviving bar profiles, picket spacing, and scroll pattern, then fabricate a like-for-like replacement in flat-bar wrought iron. This is exactly what LPC districts expect, and it is the work our Brooklyn customers ask for most often. The fabrication generally starts at $3,200 and comes with a written price before the order is placed.
If you are deciding between repairing an old Brooklyn gate and replacing it, start with a phone call. We will ask about the age of the iron, the condition of the post, and whether the block is landmarked, then give you a straight answer and a free written estimate. Call (626) 649-4572 today.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Brooklyn since 2009.