Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Flower Mound, TX
Flower Mound gate work comes with a particular set of conditions: clay soil that moves, ironwork that’s 20 to 30 years old, and HOAs that expect repairs to match the original look. We’re Latch & Post Gate Repair, part of the Cedarwell family, focused on gates and operators only. If your driveway gate is dragging, your operator won’t respond, or a post has leaned out of plumb, call (626) 649-4572 and a live person will answer, any hour.
Why Flower Mound Homes Are Different
Most Flower Mound neighborhoods were built during a specific window: roughly 1990 to 2010, when ornamental iron driveway gates and automated operators were standard on semi-custom and custom homes. Those gates are now entering the years when their original motors, control boards, and hinges tend to fail in clusters. A gate that worked fine last summer may suddenly need a new operator board and a hinge rebuild in the same visit.
Underneath all of it sits the North Texas black clay. This Vertisol soil swells with winter rain and shrinks hard in summer drought. Over 20 or 30 years, that cycle pushes gate posts out of plumb, sometimes two to four inches. Technicians who know Flower Mound inspect post alignment before quoting labor, because resetting a footing in concrete is often part of the job, not an add-on discovery. Homeowners in HOA-governed communities like Bridlewood also need repairs that match the original iron finish and style, which means we match what’s there rather than swapping in generic hardware.
Our Main Flower Mound Services
Most Flower Mound homeowners call us for one of three things: a gate that’s sagging or no longer latches, a full replacement that has to satisfy an HOA, or an electric operator that has stopped opening on command. Each has its own Flower Mound page with the details.
Gate Repair in Flower Mound
Gate repair here usually means a hinge or latch that has worn under the weight of an iron gate, or a post that’s no longer holding it level. In Flower Mound, we also see cracked welds from clay-soil racking and wood panels softened by years of summer heat. We carry hardware that matches the original ironwork so an HOA walkthrough stays uneventful. See Gate Repair in Flower Mound for typical job breakdowns and local pricing.
Gate Installation in Flower Mound
A new gate in Flower Mound has to do more than look right. The footing needs to be sized for expansive clay, the post has to set true, and the finish usually has to match other ironwork on the property. We measure, quote a written price, and build to the style your HOA already approved. Learn what a replacement involves on our Gate Installation in Flower Mound page.
Electric Gate Repair in Flower Mound
Flower Mound summers push past 100°F, and that heat is hard on older operator boards and capacitors. We see a lot of FAAC and Linear units from the 2000s that still have good motors but failed control boards. We repair what’s repairable and replace only what’s dead. Details and brand-specific notes are on the Electric Gate Repair in Flower Mound page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Flower Mound
We’re factory-trained on the brands Flower Mound homes actually use: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we diagnose right the first time and carry the common parts rather than ordering and coming back. See our brands for the full list.
Pricing for Gate Company in Flower Mound, TX
| Service | Typical range in Flower Mound |
|---|---|
| Gate repair diagnosis and minor adjustment | $95-$190 |
| Hinge replacement (iron gate, per hinge) | $85-$175 |
| Latch or lock replacement | $120-$260 |
| Gate post reset (concrete footing, single post) | $450-$950 |
| Sagging gate alignment and hardware tune-up | $165-$360 |
| Weld repair on ornamental iron gate | $145-$330 |
| Full iron gate install (single swing, no operator) | $2,200-$5,800 |
| Electric operator install (single swing) | $950-$2,300 |
| Electric operator board or capacitor replacement | $180-$480 |
| Sensor, safety edge, or keypad repair | $145-$320 |
What pushes a Flower Mound quote up is usually the footing: if years of clay movement have heaved a post out of line, the concrete work becomes part of the total. That’s why we inspect alignment before we quote, and why the written price you approve before we start is the price you’ll pay.
Neighborhoods We Serve in Flower Mound
We work across Flower Mound, from the master-planned streets of Bridlewood to the larger lots along the town’s southern and western edges. If your gate is within Flower Mound limits, we’ll come take a look, usually within one business day for non-emergency calls.
- Bridlewood
- Wellington of Flower Mound
- The Villages of Northshore
- Timber Creek
- Chimney Rock
Service Area – Cities Near Flower Mound
We serve Flower Mound and the communities around it. If you’re just over the town line, we can help there too: Roanoke, TX, Southlake, TX, Argyle, TX, and Grapevine, TX. Scheduling is coordinated from our Dallas-Fort Worth office, with crews serving Flower Mound locally.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Flower Mound
For most repairs, we can have a technician out within one business day. Emergency calls, like a gate that won’t close and leaves the yard open to pets or kids, get priority. Call (626) 649-4572 and a live person will sort out timing with you directly.
Many do, especially in communities like Bridlewood. The good news: because we match your existing ironwork finish and style, the repair usually reads as maintenance, not modification. If the HOA does need to sign off, we can provide the spec details to make that easier.
Yes, every time. We don’t start until you’ve seen the number in writing and told us to go. That promise is part of the Cedarwell Care Promise, and it’s not an upgrade or a footnote. The quote covers the full job, including any concrete or footing work found during inspection.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Flower Mound Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon