Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Boca Raton
Gate installation in Boca Raton runs $1,800 to $8,500 for most residential driveway and community entrance projects, with custom ornamental work reaching $12,000 to $25,000. A typical welded aluminum or steel swing gate with a new operator lands between $3,200 and $6,400 installed. Our crews serve every corner of Boca Raton, from the oceanfront estates along A1A to the HOA communities west of the Turnpike. Call (626) 649-4572 and you’ll reach a live person who can schedule a free measure and written estimate.
Why Latch & Post Gate Repair Is Boca Raton’s Preferred Gate Installation Company
High-end properties around Boca West, Broken Sound, and St. Andrews Country Club demand more than a standard gate drop-in. The custom fabricated and ornamental gates common in these communities are heavy, often 600 to 1,200 pounds per leaf, and the margin for a misaligned post or a miscalculated operator is essentially zero. We build for silent operation and years of trouble-free cycling, not just a gate that opens today.
Our technicians arrive in uniform, background-checked, and trained on Linear, Viking, Ghost Controls, and DoorKing systems that Boca Raton families actually own. Before any work begins, you get a written price. No verbal ballpark followed by a surprise invoice. We lay drop cloths inside the home, put on shoe covers, and send a photo of the clean-up before we leave. That’s the Cedarwell C.A.R.E. routine, and it’s non-negotiable on every visit.
Every installation is backed by the 365-Day Done Right Promise. If the gate isn’t right, we make it right. No argument. No fine print. Cody Beckman, who leads Latch & Post Gate Repair, built the brand around a simple idea: a gate comes down to two parts, the latch that holds it and the post that carries it. Get those two right, and everything else follows.
Electric Gate Installation in Boca Raton
Electric Gate Installation in Boca Raton typically costs $3,500 to $9,800 for a complete system, including the operator, safety edges, photocells, and wiring run. On a coastal estate gate along A1A, that figure leans toward the higher end because marine-grade stainless hardware and conformal-coated circuit boards are not optional here. Salt air eats standard zinc hardware within two to four years. We specify materials that survive it.
Operators Matched to Gate Weight
A heavy custom wrought-iron gate with ornamental scrollwork can weigh over 1,000 pounds. Undersized swing-arm operators rated for 400-pound gates burn out motors within a year. We install Linear and Viking operators sized for the actual leaf weight, with soft-start and soft-stop to protect the hinges.
Underground Operators for Clean Sightlines
Some Boca Raton homeowners want nothing visible at ground level except the gate itself. An underground swing operator keeps the driveway approach clean. In gated community entrances, we often pair underground operators with intercom and camera entry so the HOA board controls access while the gate disappears into the landscape.
Driveway Gate Installation in Boca Raton
Driveway Gate Installation in Boca Raton runs $2,400 to $7,200 for a single swing-leaf gate with operator, sensors, and full wiring, depending on the material and slab work involved. Double gates on estate entries start around $4,800 and go up from there. Every quote includes the concrete pad, the post set, the electrical connection, and the cleanup.
Matching the Gate to the Architecture
Boca’s stock of 1980s and 1990s country club homes often features ornate wrought-iron or cast aluminum gates with curved tops and spear finials. A flat, modern aluminum panel would look wrong. We fabricate replacements that match the original profile, or fully custom designs for homeowners replacing something that was never right to begin with.
Wind-Load Compliance on Older Communities
Here’s something a generic gate company won’t mention: Palm Beach County’s post-Hurricane Andrew wind-load amendments mean many 1980s ornate wrought-iron community gates are technically non-compliant with current standards. Any Gate Installation job involving structural post work can trigger an HOA code-compliance conversation and a City of Boca Raton Building Division permit. We handle that conversation for you, with documentation the city will accept.
Trusted Brands We Service in Boca Raton
We’re factory-trained on and install Linear swing-arm and slide operators, Viking underground systems, Ghost Controls retrofit kits, and DoorKing commercial entrance operators daily in Boca Raton. Because we work on these systems constantly, we carry the boards, remotes, and safety edges that Boca installs need, so a parts delay doesn’t leave your gate dead for a week. We also maintain legacy FAAC and early LiftMaster systems until replacement makes more sense than repair.
Common Gate Installation Problems We See in Boca Raton Homes
- Salt-corroded hinge posts on A1A estates. On oceanside properties, a hinge post can rust through enough to cause gate sag and misalignment within 3-5 years. A new gate on a compromised post is a waste of money, so we inspect and replace the post footing first.
- Obsolete FAAC, Eagle, and early LiftMaster operators. Communities built between 1975 and 1995 often still run original equipment that manufacturers no longer support. We source remaining parts where possible and convert to current Linear or Viking systems when it isn’t.
- Post-hurricane control board failures. Fall storms bring power surges that fry circuit boards across entire HOA communities at once. When dozens of gates go down simultaneously, we triage by community and get entrance gates running first.
- Wind-load non-compliance on 1980s community gates. A simple operator swap can become a structural code issue if the post was never set to current wind-resistance standards. We flag it early, not after the city inspector arrives.
Pricing for Gate Installation in Boca Raton, FL
Complete residential gate installation in Boca Raton runs $2,400 to $12,000 for most jobs. A single driveway swing gate with a Linear operator and sensors lands between $3,200 and $6,400. Custom ornamental gates and double estate entries run $6,800 to $15,000. Community entrance gates with commercial operators, intercom, and camera integration start around $12,000 and go up based on gate size and access-control complexity. You’ll see the exact number in writing before we touch anything. Estimates are free. Call (626) 649-4572 and we’ll schedule a measure at your Boca Raton property.
We Also Serve Cities Near Boca Raton
Beyond Boca Raton, our crews cover Deerfield Beach, Delray Beach, Coconut Creek, and Pompano Beach. If your property sits on the edge of Boca Raton, or you own a second home in a nearby HOA community, we can schedule you on the same route. Dispatch and scheduling are coordinated from our South Florida office, but the technicians who show up know Boca’s gate stock and code requirements specifically.
Serving Boca Raton, FL - Our Local Coverage Area
We’re based in the Boca Raton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Boca Raton
It depends on the scope. A same-footprint operator swap on existing, compliant posts typically does not require a permit. But if the structural post work, a footing replacement, or a full gate replacement is involved, the City of Boca Raton Building Division will likely require a permit, and the HOA will want documentation showing wind-load compliance. We prepare that paperwork and handle the submittal process for every installation we do. Call (626) 649-4572 to talk through your specific community.
Onshore salt air is the main culprit. Salt aerosol corrodes hinge pins, pivot posts, and circuit boards at an accelerated rate, and motors on oceanside gates can fail within 3-5 years without stainless or marine-grade hardware. Inland Boca Raton properties, 20 miles west of the coast, see much slower corrosion. For A1A installs, we specify stainless steel hardware and conformal-coated boards as standard.
Yes. We maintain a supply network for remaining FAAC and Eagle parts, and when a board or motor is no longer available, we perform a full system conversion to a current Linear or Viking operator. Many 1980s Boca Raton communities have dozens of these legacy units, and we’ve converted enough of them to handle the wiring changes and HOA documentation cleanly. Call (626) 649-4572 and we’ll identify exactly what’s on your property.
The answer depends on gate weight, post condition, and whether the gate is a single swing leaf, double swing, or sliding panel. For a 1,000-pound ornamental swing gate, we typically spec a commercial-grade Linear swing-arm operator with soft-start, soft-stop, and marine-grade hardware when the property is within a few miles of the coast. For underground installation on an estate entry, Viking underground operators run silently and handle heavy leaves well. Call (626) 649-4572 for a free measure and a written recommendation.
Post-storm power fluctuations fry control boards across entire communities at once, and HOA communities with dozens of gates all tend to need emergency service in the same two-week window. If you’re planning a new gate, August through October is the time to book it, before storm season peaks. We also recommend surge suppression on any coastal Boca Raton gate as part of the install. Call (626) 649-4572 to get on the schedule.
Written by the team at Latch & Post Gate Repair, serving Boca Raton and surrounding South Florida communities.