Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Delray Beach
Gate installation in Delray Beach usually means one of two jobs: replacing an original 1970s-1990s operator that has finally corroded through, or building a brand-new gate with hardware specified for salt air. A straightforward slide gate operator replacement runs $2,800-$4,500 in this market, and a custom aluminum or wrought-iron driveway gate with operator typically lands between $6,500 and $14,000 depending on width, automation, and access control. We are Latch & Post Gate Repair, part of the Cedarwell family of independently owned gate specialists since 2009. Cody Beckman leads our team, and we answer every call live at (626) 649-4572.
Why Latch & Post Gate Repair Is Delray Beach’s Preferred Gate Installation Company
Delray Beach is not one market. The barrier island along A1A runs on custom estate gates facing direct ocean wind, and western Delray Beach runs on HOA-governed 55-plus communities where the property manager authorizes the work before we ever roll a truck. We know both sides. Our technicians have spent years in Kings Point, Huntington Lakes, and the communities along Jog Road and Hagen Ranch Road, and we keep direct lines open to the management offices so a work order gets confirmed before we show up.
We are background-checked, uniformed, and factory-trained on the brands Delray Beach homeowners and HOAs actually run: FAAC, BFT, Linear, Viking, DoorKing, LiftMaster, Mighty Mule, Ghost Controls, and Elite. Before any work starts you get a written price. No exceptions. And our 365-Day Done Right Promise covers every installation: if it is not right, we make it right, no argument, no fine print.
Gate Opener Installation in Delray Beach
Gate opener installation in Delray Beach almost always involves replacing equipment that has been fighting salt air for 30 to 50 years. The original DoorKing, FAAC, and LiftMaster units in western Delray Beach communities are failing now, in the same five-year window, because corroded circuit boards and worn drive components reach the end of their service life on a similar schedule. We remove the old operator, inspect the mounting plate and drive rail, and install a new unit specified for coastal conditions. Most jobs are completed in one day, and the resident keeps full use of the gate throughout.
Operators With Battery Backup And Keypad Entry
A power outage should not trap anyone inside or outside a Delray Beach community. We regularly install LiftMaster and BFT swing and slide operators with integrated battery backup so the gate keeps functioning when Florida Power & Light drops. Paired with a simple keypad, residents who winter up north can hand a code to family or a caretaker and never worry about remotes getting lost.
Quiet-Start Operators For Retirement Communities
In 55-plus communities like Kings Point, the gate sits close to bedrooms and living rooms. We specify quiet-start operators wherever possible rather than a loud direct-drive motor. It costs a little more up front, usually $200-$400, and the difference is obvious the first morning the gate opens at 6:00 AM.
Gate Fabrication in Delray Beach
Gate fabrication in Delray Beach means building or ordering a gate that will not look salt-ravaged in three years. We work with local fabricators who understand that a powder-coated aluminum gate lasts far longer on A1A than raw steel, and who can match the visual style of an existing community entrance. A standard custom aluminum driveway gate for a single-family home runs $3,500-$7,500 unautomated. Ornate wrought-iron or full estate gates with automation and access control land between $8,000 and $15,000. You will see the exact number in writing before we order anything.
Corrosion-Resistant Frame Options
We recommend aluminum frames with stainless steel hinges and stainless or zinc-plated fasteners for any Delray Beach gate within a mile of the Intracoastal. Salt spray eats zinc and untreated steel quickly. Matching the post hardware matters as much as the gate panel itself, and unlike a general contractor, we spec that from the beginning rather than after the first rust stain appears.
Pedestrian Gates And Side Yard Access
Many Delray Beach homes, especially in communities east of Military Trail, have a separate pedestrian gate alongside the driveway. We fabricate and hang matching pedestrian gates, and can run a separate keypad or set the pedestrian gate to share a code with the main driveway. That is a small thing, but it is the kind of detail people notice when family visits and everyone needs in without a remote.
Trusted Brands We Service in Delray Beach
Every gate is different, but the brands we see most in Delray Beach are FAAC, BFT, Linear, and Viking, and we service all four regularly alongside LiftMaster and DoorKing. We carry local stock for the most common FAAC and LiftMaster electrical components, which means a failed control board in Kings Point does not always mean a week waiting on freight. Dispatch and scheduling are coordinated from our South FL office, and our crews work Delray Beach every day.
Common Gate Installation Problems We See in Delray Beach Homes
- Corroded circuit boards in original operators. The 1970s-1990s boards in Kings Point and similar communities have lived through decades of humidity and salt. We see dead boards, burnt relays, and terminals so corroded the wire no longer seats. Full operator replacement is usually the honest fix.
- Sagging swing gates from rusted hinge posts. Salt air works its way into the post footings along the A1A corridor, and the first sign is a gate that scrapes the driveway on the latch side. Installing a new post and gate without addressing the footing just repeats the problem in two years.
- Flooded motor enclosures after summer storms. Low-mounted operators in communities with older drainage can sit in water for an hour after a Delray Beach downpour. That kills motors and control boards faster than anything. We reset and relocate enclosures above the seasonal water line when we replace them.
- Intermittent photo-eye faults near the coast. Salt film builds on the sensor lenses and reflects false obstructions. In Delray Beach this happens faster than inland. We clean lenses and reposition eyes as part of every installation, not as a return call.
Pricing for Gate Installation in Delray Beach, FL
Gate opener installation in Delray Beach typically runs $2,800-$4,500 including operator, mounting, wiring check, and safety-eye alignment. A new unautomated driveway gate runs $3,500-$7,500. Full custom gate plus automation and access control lands between $6,500 and $15,000 depending on width, material, and keypad or intercom needs. The price you are quoted is the price you pay. We write it down and hand it to you before any work starts, and that quote includes shoe covers, drop cloths, and a cleanup photo before we leave.
Fabrication timelines in Delray Beach add one to three weeks depending on the fabricator. We visit for measurements, deliver the written price on the spot, and handle the whole job from permit-level drawings to final safety sensor testing. Same-day installation is not a real thing for fabricated gates, and we will not pretend it is. What we promise is a measured, scheduled, written-price install that does not surprise you.
We Also Serve Cities Near Delray Beach
Our crews cover Delray Beach and the surrounding communities every week. You will find us regularly in Boynton Beach, Boca Raton, Deerfield Beach, and Greenacres. If you are just north of the county line or down toward Boca, the same team handles the job and our Gate Installation process stays exactly the same. Learn more about our work in the area on our Delray Beach page.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Delray Beach
The HOA pays for the gate operator in nearly every Delray Beach 55-plus community when the gate governs community or perimeter access, and the property manager or management office authorizes the work before we schedule. If it is a private driveway gate on an individual lot within a community, the homeowner typically pays and authorizes. Our first step is always the same: confirm the work order through the right channel so no one wastes a trip. Call (626) 649-4572 and we will help sort out who approves what in your specific association.
Salt air accelerates rust and corrosion on every exposed metal component: hinge posts, frame members, motor housings, even terminal screws. A gate in Delray Beach near A1A corrodes roughly twice as fast as the same gate installed in West Boca or inland Boynton Beach. That is why we specify aluminum frames, stainless hardware, and coated or sealed control boards for coastal installs. The difference in material cost is real, usually $400-$800 for a typical driveway gate, and skipping it guarantees an earlier failure.
Yes, and in Delray Beach we recommend it strongly for any swing or slide gate that is the only vehicle exit from a property. A battery backup keeps the operator working through a hurricane-related outage or a routine FP&L drop, including enough cycles for residents to come and go. Models from LiftMaster and BFT are our most common choices. The backup adds roughly $300-$500 to the install, and we can quote the exact figure after we see your current operator.
First, use the manual release if you can reach it safely. Every automated gate has one. If you cannot operate it, or if the gate has failed in a closed position and you cannot exit on foot, call us right away at (626) 649-4572. A live person answers around the clock. We know the management companies and property managers in Delray Beach’s larger communities, which speeds up authorization when a gate-down emergency is affecting dozens of residents at once. For any gate emergency, keep clear of the gate path and do not attempt to force the operator.
Yes, we install solar-capable operators from FAAC and Mighty Mule for Delray Beach properties where running power to the gate would mean trenching under a driveway or across a landscaped yard. Delray Beach gets enough direct sun year-round to make solar viable for most dual and single swing gates, though we size the panel for summer storm runoff days rather than best-case sun. A qualified electrician should always handle the power side where grid power exists, and we will tell you plainly if solar is a bad fit for your gate layout. Reach us at (626) 649-4572 for an honest recommendation.
Delray Beach’s 55-Plus Communities And Gate Work Approval
Delray Beach has one of the highest concentrations of HOA-governed 55-plus gated communities in Palm Beach County, and that changes how gate installations actually get done here. In a city like Boca Raton, a homeowner with a private gate simply calls us and schedules. In western Delray Beach, the property manager is the paying customer, the board sets the spec, and the work order must be confirmed through the management office before our technician arrives. We have learned this the hard way over years of service in Kings Point, Huntington Lakes, and similar communities along Atlantic Avenue and Hagen Ranch Road. It is not unusual for a “gate down” at Kings Point to require the property manager’s signature on a written quote before we can touch the operator. Our installers keep direct contact lines to the management offices, which cuts a day or more off the authorization delay.
Many of those original operators were installed between 1970 and 1995. The swing-arm and slide-gate units in those communities have now crossed 30 to 50 years old. The tired ones fail in the same ways: a control board with corroded traces, a drive gear worn smooth, a motor that hums and stays still. When a slide gate at a Kings Point home finally died, our tech removed the old DoorKing rack and pinion, poured a new post footing, and installed a LiftMaster slide operator with keypad entry and battery backup. The resident, who winters in New York, got quiet operation and reliable remote access that she could monitor from anywhere. That job is the norm in Delray Beach, not the exception.
We choose pet-safe lubricants where there is a choice, and we can schedule around nap time if quiet matters. We clean up like it is our own home. Those are the Cedarwell C.A.R.E. values our techs work under: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. In a Delray Beach home, that often means drop cloths down before we step inside, quiet tools in the late afternoon, and a photo of the clean-up before we leave.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That is the job we focus on. If you own a home in Delray Beach, or you sit on a board trying to keep a 40-year-old community gate alive, start with a phone call. We will walk the site, measure, and hand you a written price. You decide from there. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Delray Beach since 2009.