Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Auburn
A new driveway or entry gate in Auburn typically costs between $2,800 and $9,500 installed, depending on the gate style, material, and whether you’re adding an electric opener. For Gate Repair - Auburn, our team handles everything from hinge adjustments to full rebuilds. Most residential installations we schedule in Auburn take one to two days once the gate and posts are on site. If you’re calling from Newcastle, Lake of the Pines, or North Auburn, our crew coordinates from the Sacramento office and reaches your property quickly, with a written price in your hand before any metal gets cut. Call (626) 649-4572 to talk through your gate with a live person, any hour.
Why Latch & Post Gate Repair Is Auburn’s Preferred Gate Installation Company
Auburn’s mix of older foothill homes and newer parcels means gate work here rarely fits a one-size-fits-all quote. We see gates hung decades ago on posts that have since shifted with the freeze-thaw cycle, and we see brand-new builds that need a clean, code-compliant install from day one. Our technicians arrive in uniform, put on shoe covers before stepping inside your home or garage, and lay drop cloths anywhere tools or hardware might touch your floors. That routine is part of the Cedarwell C.A.R.E. values our crews follow on every job.
Cody Beckman leads the Latch & Post team, and the way he runs an install in Auburn is the way we’d want someone working at our own homes: a written price before work starts, a knock before entering, and a photo of the cleanup before we leave. Every gate installation we complete carries the 365-Day Done Right Promise. If something isn’t right within a year, we make it right. No argument, no fine print.
We’re Gate Installation specialists, not general handymen. That matters in Auburn, where a gate might need to hold back Black Angus from a neighboring pasture one week and secure a hillside driveway on a 20-degree grade the next. Live calls get answered around the clock, so if you have a gate question at 6 a.m. before work, you’ll reach a person.
Gate Opener Installation in Auburn
Gate Opener Installation in Auburn usually means adding an electric operator to a gate that has been swung by hand for years, or replacing an operator that died. We install and service Viking, Ghost Controls, DoorKing, and Elite openers, which are the brands Auburn homeowners and property owners most often already own. A new opener install, including the operator arm, receiver, safety photocells, and wiring to a nearby outlet, generally runs $1,400 to $3,800 in Auburn depending on gate weight and whether a sub-panel or added conduit is needed.
Operator Retrofit on Older Gates
Many Auburn properties have a good steel or ornamental gate hung on a post from the 1980s or 1990s, with an operator that predates modern safety standards. We can often retrofit a Ghost Controls or Viking opener onto an existing gate if the hinge posts are sound and the gate swings true. If the gate is sagging or the post has rot at the base, we’ll tell you plainly that a new gate or post re-set costs less over time than forcing a new operator onto a failing frame.
Photo-Eye and Safety Upgrades
UL 325 entrapment protection is not optional on a powered gate, and a lot of older Auburn installs lack working photo-eyes or edge sensors. When we install a new opener, new safety photocells are included and tested before we leave. For gates that were hung before those rules existed, we walk you through exactly what needs to be added so the gate protects kids, pets, and delivery drivers.
Gate Fabrication in Auburn
Gate Fabrication in Auburn is the right call when an off-the-shelf gate won’t fit the opening, or the existing gate is too far gone to repair economically. We build driveway gates, pedestrian gates, and custom panels to match the setback, slope, and style of your property. A fabricated steel driveway gate for an Auburn home typically starts around $2,200 for a simple frame-and-picket design and runs to $7,500 or more for a heavy ornamental gate with full powder coating and a custom arch. A pedestrian gate runs $900 to $2,400.
Custom Driveway Gates
Auburn driveways come in odd angles and grades, especially in the older neighborhoods off Highway 49 and around Christian Valley. We measure on site, fabricate to the actual post-to-post width, and account for the pitch so the gate opens cleanly without dragging. The written quote covers the gate, hardware, and installation; you’ll see the exact number before we order steel.
Pedestrian Gate Builds
A side-yard pedestrian gate is often the first thing a stranger sees, and the first thing a child or dog slips through. We build walk gates that match the fence line, hang them on adjustable hinges so they don’t drop over time, and set a latch that small hands can work but a dog can’t. Every pedestrian gate gets the same 365-Day Done Right Promise as a full driveway install.
Trusted Brands We Service in Auburn
Our techs are factory-trained on Viking, Ghost Controls, and DoorKing openers, and we stock common control boards, remote transmitters, and safety photo-eyes for those brands so an Auburn install doesn’t stall waiting on a part. For heavier slide gates and commercial duty cycles, we routinely install Elite operators, which are built for high-cycle use along the Auburn Way industrial corridor. When you call with a brand and a symptom, we can usually tell you over the phone what a fix is likely to cost, then confirm it in writing on site.
Common Gate Installation Problems We See in Auburn Homes
- Rusted hinge pins and latch hardware. The Green River Valley’s marine moisture and 40-plus inches of annual rain work on gate hardware year-round. We use sealed bearings and stainless fasteners on Auburn installs where the standard zinc parts would fail early.
- Sagging gate panels at manufactured-home community entrances. Shared gates in the many manufactured-home communities around Auburn, especially on Lea Hill and West Hill, see hundreds of cycles a week. The original hinge post footings weren’t poured for that load, and the gate starts dragging.
- Obsolete control boards on legacy operators. A lot of Auburn operators were installed before modern safety photocells and keypad entry existed. Older boards can’t always accept those upgrades, and the honest answer is sometimes a new operator rather than a board swap.
- Posts hung before modern UL 325 safety rules. A gate installed twenty years ago may have no photo-eyes, no edge sensors, and no reverse-on-contact. That’s not just an old part; it’s a safety gap we’re required to bring up to code whenever we touch the operator.
Pricing for Gate Installation in Auburn, CA
A standard residential driveway gate install in Auburn runs $2,800 to $9,500. A pedestrian gate runs $900 to $2,400. Add an electric opener and you’re at $1,400 to $3,800 more, depending on brand and gate weight. Labor and materials are quoted together, and the number you sign is the number you pay. The quote covers every line item; we don’t add cleanup, shoe covers, or the photo documentation as surcharges. For a truck yard or commercial slide gate on the Auburn Way corridor, pricing starts higher because those gates need commercial-grade operators, heavier steel, and more robust post footings. Call (626) 649-4572 and we’ll set a time to measure and hand you a written estimate.
We Also Serve Cities Near Auburn
Our crew reaches Gate Installation in Auburn plus the surrounding foothill communities: Lincoln, Loomis, Rocklin, and Granite Bay. If you’re outside Auburn proper, call anyway – schedules fill by the week, and we’ll give you a straight answer on when we can get there and what the drive adds, if anything.
Serving Auburn, CA - Our Local Coverage Area
We’re based in the Auburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Auburn
Sometimes you can retrofit, but it depends on the operator’s age and what you’re trying to add. If the board is pre-UL 325 and you need working photo-eyes or a keypad, you’ll often spend less replacing the operator than adapting the old board. Call (626) 649-4572 with the model number and we’ll give you a straight read on the dollars either way.
Auburn sits on the Green River Valley floor, where ground-level fog and over 40 inches of annual rain keep hinge pins and latch hardware damp for long stretches. Flood-prone areas near the Green River add seasonal water intrusion that corrodes control boards and shorts motors. They just accumulate moisture faster than installs on higher ground.
Cycle count. A truck yard slide gate logs hundreds of cycles a day from semis and delivery vehicles, which wears out drive gears and burns limit switches before springs or hinges ever fail. We specify commercial-grade operators, usually Elite or heavy FAAC units, and heavier post footings for those installs.
Have a tech check the hinge post footings and the operator’s cycle rating. We’re at a shared slide gate on Lea Hill recently where the original post had kicked sideways and the old LiftMaster had run 20 years beyond its design cycle count. The fix was a commercial-grade FAAC operator, new post footings, and fresh safety photocells.
Yes. Solar is a good fit for Auburn properties where running AC power to the gate means trenching across a driveway or tearing up a yard. We install solar-compatible operators from Ghost Controls and Viking with a panel sized to your gate’s cycle count, and we’ll quote the panel, battery, and operator as one number before work starts. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Auburn, CA since 2009.