Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across White Plains
When an electric gate stops opening in White Plains, you usually need a technician who understands both the house and the street it sits on. We work on gates throughout White Plains, from the 1920s estate homes in Gedney Farm and Fisher Hill to the downtown condominium entrances and the commercial barriers along Martine Avenue. Most electric gate repairs in White Plains run between $180 and $480, and the exact written price comes before any work begins. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is White Plains’s Preferred Electric Gate Repair Company
White Plains is a different animal from the bedroom communities around it. A crew that only does residential swing gates is lost when a Martine Avenue parking structure’s barrier arm fails during morning ingress. We send background-checked, uniformed technicians who carry both UL 325 residential entrapment settings and commercial uptime standards on every truck, because in White Plains both kinds of work show up in the same shift.
Latch & Post Gate Repair is the Cedarwell family’s gate specialist. Founded in 2009, we focus on three things: gate repair, gate installation, and electric gate repair. Every visit includes our non-negotiable C.A.R.E. routine: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside. If your kids are napping or your dog gets unsettled by strangers, we can schedule around that.
Our White Plains customers tend to mention two things in reviews: the technician knocked before touching anything, and the final invoice matched the written price. The 365-Day Done Right Promise covers every repair and installation. If it is not done right, we make it right, no fine print.
Automatic Gate Repair in White Plains
Automatic gate repair in White Plains means diagnosing the operator, the loop detectors, the safety edges, and the physical gate as one system. In a city where frost heave pushes estate gate posts out of plumb every few seasons, a gate that drags on concrete is never just an operator problem. It is a post problem, a hinge problem, and a limit-setting problem all at once.
Estate Gate Alignment and Operator Re-Set
On Gedney Farm and Fisher Hill properties, 1920s and 1930s wrought-iron gates carry decades of rust and fatigue. When we re-set a LiftMaster, FAAC, or Viking operator, we first check whether the hinge post moved. Tightening the panel without addressing the post footing means another sag correction next spring.
Slide Gate Conversions on Tight Frontages
Many White Plains lots have shared driveways or frontages too tight for a swing panel. When a swing gate cannot be made to clear, converting to a slide gate means re-setting the operator, rack and pinion, and safety photocells inside a narrow envelope. The work is measured and planned, never handheld on-site improvement.
Electric Gate Motor in White Plains
An electric gate motor in White Plains gets worked hard by the specific conditions this city throws at it. Estate gates on old posts, downtown condominium gates cycling constantly, and commercial barrier arms on Martine Avenue all put different strains on a motor, and swapping the motor without finding the underlying strain is a short-term fix.
High-Cycle Motor Wear and Loop Detector Failures
Downtown White Plains gate systems cycle far more often than a Scarsdale driveway gate. A failing loop detector that keeps the gate open too long, or a motor that grinds through partial-open cycles, needs diagnosis beyond tightening a couple of screws. We service Viking, Ghost Controls, DoorKing, and Elite motors, and we stock the local parts that keep White Plains turnarounds fast.
Slow, Weak, or Stuttering Motors
A motor that hums but does not move may be a capacitor, a gear, or a free-release issue. A motor that moves slowly on a freeze-thaw morning may be fighting a post that heaved. We do not guess; we measure, then quote the work in writing.
Trusted Brands We Service in White Plains
Most White Plains homes run LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule operators. Our technicians are factory-trained on those exact brands, and we keep common parts and safety sensors locally so a second visit for parts is rare. You will see the exact brand of your operator in the written quote, not a generic line item.
Common Electric Gate Repair Problems We See in White Plains Homes
- Frost heave moving hinge posts out of plumb. Westchester’s ground frost goes 24 to 36 inches deep, and thaw-refreeze cycles push old estate gate posts out of alignment every few winters. The gate drags on the concrete apron, and the operator binds or trips its safety limit.
- Rusted hinge welds on original wrought iron. Gedney Farm and Fisher Hill gates from the 1920s and 1930s fail at the weld joint before they fail anywhere else. We cut out the failed weld, fabricate a new leaf, and re-plumb the gate rather than just snugging bolts.
- Shared driveways forcing slide conversions. White Plains lots often have no room for a swing panel, so owners convert to slide gates. Re-setting the rack, motor, and safety eyes inside a narrow right-of-way takes a crew that has done slide conversions on city lots, not just open-lawn estates.
- Loop detector failures on high-cycle commercial gates. Martine Avenue and downtown parking structures run gate operators hundreds of times a day. A loop detector that misses a car leaves a barrier arm that will not raise, and that failure mode is very different from a residential swing gate.
Pricing for Electric Gate Repair in White Plains, NY
A typical electric gate repair in White Plains runs $180 to $340 for common fixes like limit re-sets, sensor alignments, and keypad reprogramming. Motor replacements run $450 to $1,200 depending on the brand and duty cycle, and slide gate conversions start around $2,500 because they require new rack, track, and safety re-certification. Wrought-iron weld repairs on estate gates typically run $280 to $900 depending on how much fabrication the joint needs.
Every quote is written and delivered before any work starts. You will know the exact number, the exact brand, and exactly what we are doing. Call (626) 649-4572 for a free estimate that matches the final invoice.
We Also Serve Cities Near White Plains
Our Electric Gate Repair team covers White Plains plus Yonkers, New Rochelle, Mount Vernon, and the Bronx. Dispatch and scheduling are coordinated from the brand’s New York City office, and one live person answers every call. If you are just outside White Plains, give us a call and we will confirm coverage before you commit.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in White Plains
Usually the post. Westchester’s freeze-thaw cycle heaves the hinge post out of plumb, and the gate panel drags on the concrete apron while the operator binds. The operator often needs limit re-set and photocell alignment after the post is re-plumbed. Call (626) 649-4572 and we will diagnose the exact cause before quoting anything.
Yes, often on a right-of-way as narrow as a typical White Plains side lot. The conversion means new rack and track, repositioning the motor, and re-certifying the safety edges and photocells. Every conversion gets a written price before work starts, no exceptions.
Yes, a Martine Avenue barrier-arm gate runs hundreds of cycles a day and needs loop detectors, controller diagnostics, and uptime-grade repair. A residential swing gate rarely sees that stress. Our crews carry both UL 325 residential entrapment settings and commercial-grade parts, because White Plains serves up both on the same day.
Yes, any automatic gate operator must meet UL 325 entrapment protection standards, including photocells and force settings that prevent entrapment. If your gate lacks working safety sensors, we will flag it and quote the retrofit in writing. It is a safety matter, not an upsell.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is on that list, we will likely have the part on the truck. If not, we will tell you honestly before you have paid for the visit.
Call for a Quote Before the Gate Gets Worse
A gate that is dragging now will fail fully. Not dramatically, just inconveniently, on a morning you are already running late. Call (626) 649-4572 and a live person will answer, ask what the gate is doing, and book a technician to White Plains. The written price comes before any work starts, and the 365-Day Done Right Promise means if it is not right, we make it right.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving White Plains with the Cedarwell C.A.R.E. standard since 2009.