Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across West Palm Beach
Electric gate repair in West Palm Beach usually means one of three things: a motor that hums but won’t move the gate, a control board that’s dead after a storm, or a heavy gate that’s sagging off its hinge post. Most repairs run between $180 and $850 depending on the part, and we can usually have a technician to your neighborhood the same day you call. If your gate is stuck open, stuck shut, or grinding against the track, call us at (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is West Palm Beach’s Preferred Electric Gate Repair Company
We’ve worked on gates in Flamingo Park, El Cid, and the gated communities that line Southern Boulevard and Jog Road. That matters because West Palm Beach gates fail differently than gates in Orlando or Tampa – the salt air off the Intracoastal and the Atlantic doesn’t just sit on the surface, it works into hinge pins, weld points, and operator housings. Our technicians know what that corrosion looks like before it becomes a full gate replacement.
Every technician who shows up at your door is background-checked and factory-trained on the brands families actually own here: FAAC, BFT, Linear, Viking, LiftMaster, and Ghost Controls, to name a few. Before we touch anything, you get a written price. Before we leave, we photograph the cleanup. And every repair is covered by the 365-Day Done Right Promise – if it isn’t right, we make it right, no argument and no fine print.
Cody Beckman, who leads Latch & Post, built our service around a simple idea: a gate company should treat your driveway the way they’d treat their own. That’s why our technicians wear shoe covers, lay drop cloths when the job takes us inside, and ask before moving anything. Scheduling is coordinated from our South Florida office, but the crews who work in West Palm Beach live and drive these streets.
Commercial Gate Operator in West Palm Beach
Commercial gate operators in West Palm Beach carry a much heavier load than the residential openers on single-family driveways. We’re talking slide gates on steel tracks at HOA entrances off Forest Hill Boulevard, swing gates on masonry pillars in communities near the Intracoastal, and operators that cycle dozens of times a day through school pickup and rush hour. When one of these fails, it’s rarely the gate itself – it’s the operator, the control board, or the loop detector buried in the pavement.
Slide Gate Operator Rebuilds and Replacements
Slide gates in master-planned communities off Okeechobee Boulevard cycle hundreds of times a week. Rack-and-pinion gears wear, motors overheat, and salt corrosion eats at the chain and sprockets. We rebuild what’s salvageable and replace what isn’t, with a written price before any work begins.
Operator Service for HOA Entrance Gates
When an HOA gate goes down, it’s not one homeowner who’s locked out – it’s everyone. We work with community association managers across West Palm Beach to keep entrance gates running, and we keep common control board models in stock for faster turnaround. Most commercial operator replacements run between $850 and $2,400 depending on the size and brand of the unit.
Gate Opener Repair in West Palm Beach
Gate opener repair in West Palm Beach is often simpler than homeowners expect – and sometimes it’s not the opener at all. We get calls where the opener is blamed, but the real problem is a hinge post that salt air has corroded until the gate drags. That’s the local failure mode we see constantly, especially in the historic neighborhoods near the water. The repair approach changes depending on what’s actually wrong.
Motor Replacement and Arm Repair
When a swing gate opener motor burns out, the gate usually stops mid-swing or refuses to respond. We test the motor, check the arms and limit switches, and replace only what’s failed. A typical gate opener motor replacement in West Palm Beach runs $320 to $680, and the part is warrantied through our 365-Day Done Right Promise.
Control Board Diagnostics
After a tropical storm passes through Palm Beach County, power surges fry control boards with predictable regularity. The gate sits dead, the keypad blinks, and the remote does nothing. We diagnose the board, test the transformer and power supply, and install the correct replacement. Most control board jobs run between $280 and $550 including the part and labor.
Trusted Brands We Service in West Palm Beach
We service the operators and access systems West Palm Beach homes and HOAs actually run: FAAC, BFT, Linear, and Viking are the ones we see most often on ornamental swing gates and slide gates across the area. Because our technicians are factory-trained on these brands, we can diagnose problems faster and carry the right parts. When you call about a specific brand and model, we’ll tell you honestly whether it’s worth repairing or whether the operator has reached the end of its life. Written price first, always.
Common Electric Gate Repair Problems We See in West Palm Beach Homes
- Salt-air corrosion at the hinge post. The Intracoastal and ocean breezes push salt-laden air into steel hinges and weld points. Within a few years, the post and hinges corrode, the gate sags, and the operator strains to move a gate it’s no longer aligned with. We address the post, not just the panel.
- Post-storm control board failures. Every hurricane season, the first calls come from gated communities along Southern Boulevard and Jog Road – not from downed gates, but from fried Viking and LiftMaster boards shorted out by surge or moisture. These gates stay locked open or shut until the board is replaced.
- High-cycle wear on HOA slide gates. Communities off Okeechobee and Forest Hill Boulevards run their slide gates hundreds of times a week. Rack-and-pinion components, loop detectors, and chain drives burn out from the sheer volume of cycles combined with salt corrosion. Regular maintenance catches these before full failure.
- Sagging ornamental gates on older masonry pillars. In historic neighborhoods like Flamingo Park and El Cid, 1920s-to-1950s masonry pillars hold wrought-iron gates that were heavy to begin with. When the steel hinge post corrodes inside the pillar, the gate drags. The fix isn’t adjusting the panel – it’s resetting the post footing and coating the hardware against further corrosion.
Pricing for Electric Gate Repair in West Palm Beach, FL
Here’s what we actually charge in West Palm Beach, in plain numbers. Gate opener motor replacement runs $320 to $680. Control board replacement runs $280 to $550. Safety sensor or photocell replacement runs $140 to $260. Commercial operator replacement on an HOA entrance gate runs $850 to $2,400 depending on the unit. A service call to diagnose the problem runs $89, and that amount is credited toward your repair if you move forward. You’ll see the exact number in writing before we touch anything – no exceptions, no pressure. Call (626) 649-4572 for a free phone estimate.
We Also Serve Cities Near West Palm Beach
Our Electric Gate Repair team works across Palm Beach County. We serve Palm Beach, Greenacres, North Palm Beach, and Palm Beach Gardens with the same written pricing and 365-Day Done Right Promise. If you’re anywhere near Electric Gate Repair in West Palm Beach, call us and we’ll send a technician who knows your neighborhood.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in West Palm Beach
Your gate hardware is being slowly eaten by salt air. West Palm Beach sits between the Intracoastal Waterway and the Atlantic Ocean, so even neighborhoods a mile inland get corrosive salt-laden breezes. Steel hinges, weld points, and operator housings develop galvanic corrosion in just a few years without proper protective coatings – noticeably faster than Orlando or Tampa, where the air is not saturated with salt the same way. The fix is earlier intervention and coated hardware at the hinge post.
It’s almost always a fried control board, not a mechanical failure. Power surges and water intrusion from the storm short out the Viking or LiftMaster boards, and the gate locks in whatever position it was in when the power hit. We diagnose the board, replace it, and test the safety systems before declaring the gate operational again. Call (626) 649-4572 and we’ll tell you what we’re dealing with, straight up.
Usually, yes – but the fix is at the post, not the panel. The steel hinge post inside the masonry pillar corrodes from salt air until the gate no longer hangs true. We reset the post footing, replace the corroded hinge hardware, and coat the weld points to slow future corrosion. In El Cid, our crew serviced a 1940s wrought-iron swing gate that had been dragging for months because of exactly this – the homeowner avoided a full panel replacement another company had quoted. Your gate likely has the same option.
Automatic gate operators in West Palm Beach must comply with UL 325 safety standards, which means working safety photocells or contact edges that reverse the gate if it senses an obstruction. We install and test these systems on every operator we replace or repair. If your gate’s safety sensors aren’t functioning – whether from salt corrosion at the connectors or old age – the gate is a safety hazard and should be addressed immediately. We won’t leave a gate operational without working entrapment protection.
Yes. We service solar gate openers and keypad or card-reader access systems across West Palm Beach HOA communities, including the slide gates off Okeechobee Boulevard and the swing gates near the Intracoastal. Solar systems suffer less from surge damage but still need battery replacement and panel cleaning to handle the salt film that builds up in this climate. Most keypad repairs run $120 to $240, and we’ll quote it in writing before we start.
Call for Electric Gate Repair in West Palm Beach
If your gate is stuck, sagging, or dead after a storm, call us at (626) 649-4572. A live person answers 24/7, and we’ll give you a straight answer on what it’ll take to fix it. Every repair comes with a written price before work begins, shoe covers and drop cloths on every visit, a photo of the cleanup, and the 365-Day Done Right Promise behind it.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving West Palm Beach since 2009.