Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across University Park
Electric gate repair in University Park typically costs $185-$460 for most operator, keypad, and limit-switch faults, and our crew can usually be on site the same day you call. We run jobs from Preston Road to the SMU-adjacent blocks every week, so we already know the difference between a 1940s brick pillar heaving off plumb and a LiftMaster operator that simply lost its limits. Call (626) 649-4572 and a live person answers, 24 hours a day, no voicemail queue.
We lay drop cloths on the limestone entry before we bring tools inside, and we put on shoe covers before stepping past the threshold. Your floors stay clean. Your dogs stay inside the house. And if a quiet nap is happening overhead, we’ll work with hand tools until the kids are up.
Why Latch & Post Gate Repair Is University Park’s Preferred Electric Gate Repair Company
University Park homeowners call us because we fix the thing that’s actually wrong, not just the thing that beeped. A gate that drags on Lovers Lane usually isn’t a bad motor. It’s a post that heaved with the black-clay soil and tilted the whole leaf out of square. Our Electric Gate Repair team starts every University Park job by checking the footing and pillar alignment before touching the operator, because in this city it’s the ground that moves, not the gearbox.
Cody Beckman leads the Latch & Post crew, and he’s the one who sets the rule that a written price lands in your hand before a single tool comes off the truck. We don’t test your patience with vague ballparks and we don’t surprise you at the end. The number you approve is the number you pay, and the 365-Day Done Right Promise means if something isn’t right, we make it right, no argument.
Because University Park is our regular service ground, we keep Viking, FAAC, BFT, and Linear boards and remotes stocked for same-day swaps. No waiting a week for a part that another shop orders in from Houston.
Commercial Gate Operator in University Park
A Commercial Gate Operator in University Park covers the heavier automation jobs: sliding gates on steel track, dual swing gates on brick pillars, and operators that cycle dozens of times a day rather than four. These jobs run $450-$1,200 depending on operator type, and the first visit includes a written price before any work starts.
Sliding Gate Operators on Tight Setbacks
A lot of University Park properties share driveway easements or have frontages too narrow for a swing gate leaf to arc. On those, a sliding operator mounted on a concrete pad does the work, but the black-clay soil means that pad needs to be checked for heave before the motor is blamed. We level the track, set the limits, and keep the pedestrian gate on manual operation while we work so the family still gets in and out.
Dual Swing Gate Systems
Dual swing gates on estate driveways cycle heavy iron leaves hundreds of pounds each, and when one leaf lags, the operator is usually fine. The hinge post has moved. We correct the post, reseat the pillar wiring, and only then recalibrate the operator. Most dual swing operator repairs in University Park run $350-$800.
Gate Opener Repair in University Park
Gate Opener Repair in University Park is our most common call, and it runs $185-$420 in most cases. The opener is the box that turns the arm and closes the gate, and when it’s fighting a binding leaf or a post that has heaved out of plumb, it throws faults that look like motor failure but aren’t.
Limit Switch Recalibration
Summer heat above 100°F expands steel gate frames enough that a gate that closed flush in March starts bouncing back in July. The LiftMaster or BFT board throws a limit fault and the gate sits open. We recalibrate the open and close limits against the actual leaf position, which usually takes under an hour, and we check whether the hinge post has shifted first, because recalibrating a gate on a moving post means you’ll be back in six weeks.
Keypad and Remote Programming
When a University Park keypad stops opening the gate, it’s often low-voltage wiring that got pinched or pulled when a pillar shifted. We trace the run from the keypad niche in the brick back to the control board, repair or replace it, and reprogram the remote fobs the family actually uses. Keypad repair alone usually runs $120-$200.
Trusted Brands We Service in University Park
We’re factory-trained on the equipment University Park homes actually have: FAAC hydraulic operators on heavy iron estate gates, BFT sliding operators on shared-driveway properties, Linear and Viking boards on mid-century retrofits. We stock common boards, remotes, and photo-eye sensors for these brands locally, which means most University Park repairs finish the same day we show up.
Common Electric Gate Repair Problems We See in University Park Homes
- Pillar heave from expansive clay. The black-clay soil under University Park swells in wet seasons and shrinks in dry ones, tilting brick gate pillars off plumb. The gate drags, binds, and throws limit faults, and the fix has to address the footing, not just the panel.
- Heavy iron panels stressing hinge posts. A 600-lb wrought iron gate on a 1920s masonry pillar puts enormous torque on the post. When only the panel is corrected and not the post, the sag comes back within months.
- Heat-damaged hydraulic seals. Summer temperatures above 100°F harden and crack the rubber seals inside hydraulic operators, causing slow drift and fluid seepage. We see this every year on FAAC units across the Park Cities.
- Shared driveway access conflicts. When a gate serves two homes and one operator fails, keeping both families moving matters as much as the repair itself. We stage the work so the driveway never goes fully dead.
Pricing for Electric Gate Repair in University Park, TX
We Also Serve Cities Near University Park
While this page focuses on Electric Gate Repair in University Park, our crews also take calls from Dallas, Fort Worth, Houston, and San Antonio. The gate systems near you get the same written price and the same cleanup standard, wherever the truck goes.
Serving University Park, TX - Our Local Coverage Area
We’re based in the University Park area and offer Gate Installation in University Park, and we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in University Park
Why does my electric gate in University Park keep dragging even after the hinges were replaced?
Because the hinge post itself has likely heaved with the black-clay soil and tilted off plumb, so the new hinges are working on a moving post. The fix is to reset the post footing and re-align the pillar before the operator’s limits will hold. We check footing alignment on every University Park repair before we touch a motor. Call (626) 649-4572 and we’ll take a look.
Does a gate repair or pillar rebuild in University Park need a permit from the City of Dallas?
No. University Park is an independent municipality entirely surrounded by Dallas, so gate modifications and pillar rebuilds go through University Park’s own city hall and inspections department, never through Dallas. Outside contractors miss this constantly. We file through the correct jurisdiction on every job.
Can you repair a sliding gate in University Park when a swing gate will not fit?
Yes. Shared driveways and narrow frontages in University Park often require sliding gates, and we work on those tracks, rollers, and operators regularly. The same clay-soil heave that tilts brick pillars also shifts concrete slide pads, so we level the track before calibrating the motor.
What causes a heavy wrought iron gate on a University Park brick pillar to throw limit-switch faults?
Usually it’s a combination of the steel frame expanding in 100°F heat and the hinge post shifting off plumb from expansive soil movement. The operator’s limit settings no longer match the actual leaf position. We correct the post first, then recalibrate the limits. Otherwise the fault comes back.
Will you keep our University Park driveway usable during an electric gate repair?
Yes. We stage repairs so at least one gate leaf or the pedestrian gate stays operable throughout the job. On a recent 1930s Tudor Revival on Lovers Lane where a 700-lb wrought iron gate had heaved off its footing, our crew kept one leaf on manual operation until the pillar and low-voltage wiring were stabilized and the gate closed flush again. Nobody’s schedule got stuck behind our truck.
Call Latch & Post Gate Repair in University Park
If your gate is dragging, binding, beeping, or refusing to close, call (626) 649-4572. You’ll get a live person, a straight answer, and a written price before work starts. We’ll protect your floors, respect your quiet, and leave you a photo of the cleanup before we go. That’s the Cedarwell C.A.R.E. routine, and it’s how we’ve worked in University Park since long before the teardown boom, led by Cody Beckman and a crew that treats your driveway like their own.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving University Park through the Cedarwell family of gate specialists.