Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Auburn, WA
When a gate stops latching in Lea Hill or a slide gate at a warehouse campus along Auburn Way North won’t budge, the fix depends on who you call and what they know about this city. Auburn sits on the Green River Valley floor, where damp air, fog, and 40-plus inches of annual rain work on metal hardware year-round. That means hinge pins rust faster here than on the hilltop suburbs, and operators near the river see water intrusion that shortens motor life. Call (626) 649-4572 and a live person answers, day or night.
Why Auburn Homes Are Different
Auburn’s housing stock shapes which gate failures we see most. Lea Hill and West Hill lean toward 1970s and 1980s tract homes where original gate hardware is reaching the end of its service life – post brackets have corroded into the concrete, latch tongues no longer sit square, and wooden gates have begun to sag into the frame. The city also carries a high concentration of manufactured-home communities, many with shared entrance gates that open and close hundreds of times a day while repair money gets deferred. Those gates fail differently than a single-family driveway gate, and fixing them well requires knowing the difference.
The other half of Auburn is industrial. The truck yards, distribution centers, and warehouse campuses near the rail yards and along the Auburn Way corridor run commercial slide gates at cycle counts no residential operator was designed to handle. A driver radios the gate from a semi, the motor grinds, and the gate stops halfway. On those jobs, the first thing our technicians inspect is the drive gear and limit switches – not the hinges. Most residential gate techs never see that failure pattern. It’s the dominant one in Auburn.
Our Main Auburn Services
Auburn homeowners and property managers call us most for two things: getting a broken gate working again and replacing one that’s beyond repair. Electric gate repair runs a close third, especially on shared community entrances.
Gate Installation in Auburn
New gate installation in Auburn means planning for what the valley floor does to metal and wood. We measure for ground slope and drainage so the hinge post isn’t sitting in water, and we account for wind loads on exposed West Hill properties. The quote is written, the price is set before any work begins, and the gate is built to open and close cleanly for years. We walk you through material and hardware choices before anything is ordered. Details are here: Gate Installation in Auburn.
Electric Gate Repair in Auburn
Auburn’s electric gates carry heavier loads than most: high daily cycle counts on community entrances, plus valve-sealed operators near the Green River that absorb moisture through the control board. Our technicians open the panel, test the limit switches and capacitor, and diagnose whether the board, motor, or a buried sensor is failing before they quote a dollar figure. We service the brands Auburn families and businesses actually own. See what we handle: Electric Gate Repair in Auburn.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Auburn
Our Auburn trucks run factory training on Linear, Viking, Ghost Controls, and DoorKing equipment. For each brand, we keep common control boards, remote transmitters, and replacement arms stocked locally so a simple swap happens in one visit instead of two. See the full list on our brands page.
Pricing for Gate Company in Auburn, WA
| Service | Typical range in Auburn |
|---|---|
| Gate latch replacement | $75-$250 |
| Hinge replacement (pair) | $125-$350 |
| Gate sag repair | $150-$400 |
| Gate opener motor replacement | $400-$1,200 |
| Control board replacement | $300-$800 |
| Full wood gate replacement | $900-$2,500 |
| Wrought iron gate replacement | $1,500-$4,000 |
| Commercial slide gate repair | $500-$1,800 |
| Operator arm replacement | $250-$650 |
| Safety sensor replacement | $150-$450 |
Prices climb in Auburn when a gate has been neglected through several wet winters and the frame needs rebuilding, not just hardware replacement. Commercial slide gates on the industrial corridor also run higher because of their size and gear wear. Whatever the number, you’ll see it in writing before any work begins – and that written price is what you pay, no surprises after the job.
Neighborhoods We Serve in Auburn
We cover all of Auburn, from the residential streets of Lea Hill and West Hill to the manufactured-home communities along the valley floor and the truck yards near the rail line. Our typical response window in Auburn is one to two business days for non-emergency work, with same-day scheduling available for urgent repairs.
- Lea Hill
- West Hill
- North Auburn
- Downtown Auburn
- Green River Valley industrial corridor
Service Area – Cities Near Auburn
If you’re on the edge of town or managing a property across the city line, we also serve Federal Way, WA, Pacific, WA, Milton, WA, and Kent, WA. Dispatch is coordinated from our Seattle office; the technician at your gate in Auburn lives and works locally.
Serving Auburn, WA - Our Local Coverage Area
We’re based in the Auburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Auburn
For a gate that won’t close or is stuck open and leaving your home unsecured, we can typically schedule a same-day visit. For routine repairs and new installations, we usually arrive within one to two business days. Call (626) 649-4572 and we’ll give you a straight answer on timing for your neighborhood.
Most residential driveway gate replacements on existing posts don’t require a city permit, but some HOA communities in Auburn have their own design rules. Commercial gates along Auburn Way North may need city review depending on scope. We’ll tell you what applies to your property before anything gets ordered.
Yes. Many Auburn communities – especially manufactured-home communities with shared entrance gates – require scheduling outside peak traffic hours. We coordinate with property managers on timing and often complete the repair between morning and evening rush, with quiet tools if residents are nearby.
If your gate is sagging, sticking, or simply not latching the way it should in Auburn, call (626) 649-4572 for a free, no-pressure estimate. The price is written before any work starts, and every job is covered by our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Auburn Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs