Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Sunrise, FL
Gate repair in Sunrise, FL usually means one of two things: a swing gate that’s sagged off its hinges in the humidity, or an electric operator that stopped responding after a storm. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we work on both. What makes Sunrise different from the rest of Broward is the age and density of its HOA communities. Whole neighborhoods were built in the 1970s and 80s with gate hardware that’s now reaching the end of its service life all at once. If you need a gate company in Sunrise, call (626) 649-4572 and a live person answers.
Why Sunrise Homes Are Different
Sunrise sits against the Everglades buffer on the western edge of Broward, and that location shapes almost every gate repair we do here. The air is wetter than it is a few miles east, and the canal system that runs through the city keeps moisture near the ground for most of the year. Hinges rust faster. Operator circuit boards corrode. Wood pickets swell and hollow-steel frames start to flake. Most of the homes behind these gates were built between the mid-1970s and early 1990s, and a large share sit inside deed-restricted, HOA-governed communities like Sunrise Lakes. Those communities don’t have one gate; they have twelve or twenty, spread across phases, and many of the original Slide and swing operators are now thirty to fifty years old. That means gate work in Sunrise often runs through a board, not a single homeowner, and access code coordination happens before we ever touch a control box.
One more Sunrise-specific issue: green iguanas. The canal banks and conservation edges along the western neighborhoods give them exactly the habitat they like, and they have a habit of nesting inside ground-mounted operator housings and chewing through low-voltage wiring. We see it regularly. It’s one of the first things we check when an operator fails for no obvious reason.
Our Main Sunrise Services
The two calls we get most often in Sunrise are a gate that won’t latch and an electric operator that’s gone silent. Here’s how we handle each one.
Gate Repair in Sunrise
A sagging gate in Sunrise usually starts with a hinge pulling loose from a post that’s soaked up years of canal humidity. We replace the hardware, sure – but we also check what the post is anchored into. In a lot of Sunrise communities built in the 80s, the posts were set before current wind-load standards, and a gate that catches a summer storm can twist the whole frame if the post base has softened. We quote the fix in writing before we begin, and we bring the gate back to square. See Gate Repair in Sunrise for what a typical repair involves and what it costs.
Gate Installation in Sunrise
New gates in Sunrise have to deal with two things at once: the humidity off the canals and the HOA rules that govern design and hardware choices. We work within those rules. Whether it’s a villa-side pedestrian gate or a full driveway swing, we spec hardware that’s coated for constant moisture and operator enclosures that seal tight. Measurements, placement, and concrete work are all scheduled, never rushed, and you get a written price before any work is ordered. Details on the process are on the Gate Installation in Sunrise page.
Electric Gate Repair in Sunrise
When an electric gate stops responding in Sunrise, the cause is often moisture inside the control board, wiring chewed by an iguana, or a limit switch that’s slipped out of adjustment after years of storms. We test the operator, the photo eyes, the keypad, and the wiring run before we recommend anything. FAAC, BFT, Linear, and Viking parts are the ones we see most across Sunrise communities, and we carry common boards and remotes with us. Read Electric Gate Repair in Sunrise for the full troubleshooting walkthrough and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Sunrise
Most Sunrise communities run operators from FAAC, BFT, Linear, or Viking. Cody Beckman keeps our trucks stocked with the common control boards, remotes, and photo eyes for those brands so the first visit is usually the only visit. See our brands for the full line we service.
Pricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate service call and diagnosis | $60-$100, credited toward repair |
| Gate latch or lock replacement | $90-$225 |
| Hinge replacement (pair) | $150-$450 |
| Sagging gate realignment | $125-$300 |
| Chain-link gate tension adjustment | $75-$175 |
| Gate opener circuit board replacement | $250-$600 |
| Gate opener motor replacement | $400-$900 |
| Safety sensor or photo eye repair | $120-$300 |
| Full operator replacement (parts and labor) | $950-$2,600 |
| Keypad or access control install | $250-$850 |
Two things push a Sunrise quote toward the top of those ranges: HOA code coordination, which can add a visit or two, and the extra corrosion work needed when hardware has been sitting in Everglades-adjacent moisture for years. Whatever the number, you’ll see it in writing before we start, and it won’t change without your sign-off.
Neighborhoods We Serve in Sunrise
We work across the whole city, from the older villa communities in the west to the condo and single-family pockets closer to Sawgrass Mills. The neighborhoods below are where we spend most of our time.
- Sunrise Lakes
- Bonaventure
- Welleby
- Springtree
- Savanna
Most Sunrise calls get a same-day or next-day visit, depending on where in the city you are and whether HOA access needs to be arranged first.
Service Area – Cities Near Sunrise
Beyond Sunrise itself, our crews cover the wider South Florida metro. We handle gate work in Jacksonville, FL up the coast, Miami, FL just south, Tampa, FL across the state, and Orlando, FL in the center. Each city gets the same written-price promise and the same cleanup routine.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
Most Sunrise calls are scheduled same-day or next-day, though HOA communities sometimes need board or property-manager approval before we can access the gate equipment. Call (626) 649-4572 and we’ll work out the soonest slot that fits your community’s rules.
Usually yes. Many Sunrise communities treat gate equipment as common property, which means the board or property manager needs to approve the work and provide access codes before we begin. We’re used to that flow and we’ll help you get the paperwork moving.
Always. We put shoe covers on at the door, lay drop cloths wherever we’re working, and take a photo of the cleaned-up area before we leave. That’s part of every visit, at no extra charge, and it’s how Cody Beckman’s crews operate across all of Sunrise.
If your gate isn’t latching or your operator isn’t responding, call (626) 649-4572 for a free estimate. A live person answers, day or night, and the price you’re quoted is the price you’ll see in writing before anything gets touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco