Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Burbank, CA
Burbank gate work splits into two worlds: studio-adjacent commercial systems along Olive and Alameda Avenues that run dozens of cycles a day, and residential gates in neighborhoods like Magnolia Park and the Rancho district, where 1940s-to-1960s homes carry gates retrofitted in the 80s and 90s that are now failing together. Summer heat above 105°F cooks operator motors and control boards, while Santa Ana winds slam swing gates against their stops hard enough to bend hinges and shear welds. We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist, and we focus on one thing: gates that latch and posts that hold. Call (626) 649-4572 when a gate stops cooperating.
Why Burbank Homes Are Different
Most of Burbank’s residential streets are lined with post-WWII ranch homes built from the 1940s through the 1960s. The wrought-iron and tubular steel driveway gates on many of those homes were added in the 1980s and 1990s, and those gates are now reaching the end of their service life at roughly the same time. Hinges are wallowed out. Weld points are fatigued. Gate posts set in shallow concrete pads are leaning just enough to make the latch stop lining up.
The climate accelerates all of it. Burbank sits in the interior San Fernando Valley, regularly running 10 to 15 degrees hotter than coastal Los Angeles. Summer days above 105°F overheat gate operator motors and control boards, and the heat breaks down grease in hinges and rollers faster than it does nearer the coast. Then the Santa Ana winds arrive, funneling through the passes and slamming swing gates against their stops. We see bent hinge plates and sheared welds from wind loading in Burbank more than in any surrounding city.
The Rancho neighborhood on the south side adds one more variable: larger lots with horse-property zoning and heavy swing gates sized for trailer clearance. Those gates need higher-torque operators than a standard residential unit, and a fair number of them were originally under-specified, which is why they fail in specific, predictable ways. The point is that Burbank work is not interchangeable with Glendale or North Hollywood work. The heat, the wind, and the age of the housing stock all shape the repair.
Our Main Burbank Services
Most Burbank homeowners call us for one of two reasons: a gate that no longer opens, closes, or latches, or a gate that needs to be replaced outright. Electric gate repair sits alongside both, and each service has its own detailed Burbank page below.
Gate Repair in Burbank
Gate repair in Burbank usually means one of three things: a sagging gate, a latch that no longer catches, or hinges and welds that have given out under heat and wind. We carry replacement hinges, latch hardware, and steel stock sized for the tubular and wrought-iron gates common in Magnolia Park and the Rancho district. A technician arrives, lays out the problem in plain terms, and hands you a written price before any work starts. Shoe covers and drop cloths are part of every visit, not an add-on. See the full breakdown on our Gate Repair in Burbank page.
Gate Installation in Burbank
New gate installation in Burbank means matching a new gate to an older post-WWII home without making it look like a patch job. We measure the opening, check the existing posts for plumb and concrete depth, and recommend gate styles that hold up to San Fernando Valley heat and Santa Ana wind loading. Every installation quote includes the gate, hardware, post evaluation, and clean-up, written out line by line before you approve anything. Details are on the Gate Installation in Burbank page.
Electric Gate Repair in Burbank
Electric gate repair in Burbank often traces back to the same two culprits: heat-stressed control boards and operators that were never sized for the gate’s weight and wind exposure. We service LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and other common brands, and we stock the parts that fail most in this climate. On commercial slide gates near the studio corridors, worn drive wheels and chains from high daily cycle counts are routine. Read more on our Electric Gate Repair in Burbank page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burbank
We’re factory-trained on equipment families actually own in Burbank, including LiftMaster, Viking, Ghost Controls, and DoorKing. We stock common replacement parts locally rather than ordering everything in, which means most repairs happen on the first visit. See our brands for the full list of what we work on.
Pricing for Gate Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Gate latch replacement | $145 – $260 |
| Hinge replacement (standard tubular steel gate) | $210 – $395 |
| Sagging gate realignment | $180 – $330 |
| Post reinforcement or reset | $390 – $780 |
| Weld repair at hinge or frame point | $160 – $350 per point |
| Automatic gate operator replacement | $850 – $1,900 |
| Control board replacement | $280 – $520 |
| Drive chain or belt replacement | $220 – $410 |
| Safety sensor replacement | $150 – $290 |
| Full gate installation (single swing) | $1,200 – $3,200 |
| Full gate installation (slide) | $2,000 – $5,500 |
| Electric gate component bundle (operator, sensors, wiring) | $1,100 – $2,600 |
Two things push Burbank pricing higher than the county average: the Rancho district’s oversized horse-property gates that need higher-torque operators, and heat-related failures in control boards and motors that require full component replacement rather than adjustment. Whatever the number is, you see it in writing before any work begins. No estimate, no work. Every single visit.
Neighborhoods We Serve in Burbank
We work across Burbank from the studio corridors to the hillside streets, and we schedule service in named neighborhoods rather than vague zones:
- Magnolia Park
- Rancho District
- Chandler Park
- Toluca Terrace
- North Hollywood-adjacent Burbank streets
Most Burbank gate repair calls are answered by a live person at (626) 649-4572 and scheduled promptly, with the exact arrival time confirmed before a technician heads your way.
Service Area – Cities Near Burbank
While this page covers Burbank itself, we also serve homes and businesses in the surrounding communities. If you’re in Glendale, CA, West Hollywood, CA, Altadena, CA, or Beverly Hills, CA, each of those pages covers local pricing and conditions for that specific city. A live person answers calls around the clock, so you’ll always reach a human when you call (626) 649-4572.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Burbank
Calls are answered by a live person 24/7, and we schedule Burbank jobs on a local route rather than a metro-wide dispatch. Evening and weekend slots go quickly during the summer heat season, so calling early in the day usually means a faster visit. The exact arrival window is confirmed before a technician heads out.
Repairs on an existing gate rarely require a permit in Burbank. New installations, especially those with an electric operator or a gate on a hillside or corner lot, may need city review. We can tell you during the initial call what applies to your situation and factor any approval timing into the schedule.
Yes. A meaningful share of our Burbank work is on commercial slide gates and card-access operators along the Olive and Alameda corridors, where daily cycle counts run far higher than residential use. The same written-price and clean-up care applies to every job, residential or commercial.
If your Burbank gate is sagging, sticking, or refusing to open, call us at (626) 649-4572 for a straight answer and a written price. We’ll tell you what’s wrong, what it costs, and when we can be there.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco