Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across New Braunfels
When an electric gate stops responding in New Braunfels, it’s rarely the motor alone. Most calls we run across Veramendi, Vintage Oaks, and the Gruene Road corridor trace back to a few predictable causes: an undersized builder-grade operator that finally gave out, a control board shorted by a Guadalupe River rise, or a hinge post that heaved out of plumb in the clay soil and bound the whole panel. We fix all of it. Our Electric Gate Repair team handles gate motor repair, opener repair, keypad replacement, remote programming, safety sensor alignment, and control board diagnostics across New Braunfels, with a live person answering when you call (626) 649-4572.
We’re part of the Cedarwell family, and we’ve been repairing gates since 2009. What that means for a New Braunfels homeowner is simple: a written price before any work starts, shoe covers and drop cloths on every visit, and a photo of the clean-up before we leave. Your floors stay clean, your dogs stay in the yard, and you know exactly what the repair costs before we touch a tool.
Why Latch & Post Gate Repair Is New Braunfels’s Preferred Electric Gate Repair Company
New Braunfels has a gate repair rhythm most cities don’t. The master-planned communities built between 2010 and today, Veramendi, Vintage Oaks, Gruene Estates and dozens more, all went in around the same time with ornamental iron driveway gates and community entry systems. Those operators are now hitting their first major repair cycle simultaneously. A dead gate in Veramendi isn’t an odd failure. It’s the predictable end of life for a builder-installed LiftMaster paired with a panel it was never sized to carry.
Then there’s the river side of town. Gruene Road and River Road short-term rental properties cycle their gates harder than any residential driveway in Texas. Anonymous guest turnover means constant open-and-close cycles, and the Guadalupe’s flood schedule means operators get submerged, control boards short, and hinges pack with silt. Every rainy season produces a wave of calls. We staff around it because we’ve been doing this long enough to know the calendar.
Our technicians are background-checked, uniformed, and factory-trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, DoorKing, Elite, and more. When you call, a live person answers, 24/7. No voicemail queue, no callback roulette. You describe the problem, we set a time, and we show up ready to diagnose.
Commercial Gate Operator in New Braunfels
Commercial gate operator work in New Braunfels usually means one of two things: a community entry system at an HOA property that has stopped cycling reliably, or a short-term rental owner upgrading a residential driveway gate to handle guest turnover. In both cases, the operator is doing more work per day than a standard residential gate, and the fix has to account for that duty cycle. A typical commercial operator repair or replacement in New Braunfels runs $850 to $2,400 depending on the operator class and whether we’re replacing the control board, the loop detector, or the full head unit.
Community Entry Systems
HOA gates in Veramendi and similar communities often run a DoorKing or Viking operator with a telephone entry system. When those fail, we replace the operator to match the existing pedestrian loop and vehicle loop wiring. We coordinate with the HOA board or property manager so the gate isn’t down during school drop-off hours.
Short-Term Rental Driveway Gates
Riverside STR gates need an operator that survives constant cycling and a keypad system that lets out-of-state owners issue and revoke guest codes remotely. We install and program those keypads so owners never have to be on-site to let a guest in.
Gate Opener Repair in New Braunfels
Gate opener repair in New Braunfels covers everything from a swing-arm operator that’s chattering to a slide gate that reverses halfway. Most opener repairs run $240 to $680. When the operator is beyond repair, a full replacement install typically lands between $900 and $1,900. You’ll see the exact number in writing before we order the part or turn a wrench.
Undersized Builder-Grade Operators
In Veramendi, we’ve run the same call repeatedly on 2015 to 2018 ornamental iron swing gates: the LiftMaster operator was undersized for the panel, and the loop detector was wired off the same circuit as the irrigation timer. The gate would free-cycle at 4 a.m. We upsized the operator, moved the loop detector to a dedicated breaker, and corrected the sag at the hinge post rather than shimming the panel.
Flooded Control Boards
On Gruene Road after the last rise, we’ve pulled submerged FAAC operators, dried and replaced a shorted control board, flushed silt out of the hinges, and reset the keypad entry so out-of-state owners could still issue guest codes remotely. The motor often survives; the board rarely does.
Trusted Brands We Service in New Braunfels
We’re factory-trained on the operators New Braunfels homeowners and property managers actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common control boards, remote transmitters, safety sensors, and hinge hardware stocked locally so most repairs happen on the first visit rather than waiting on a parts shipment. If your gate runs a Viking operator in Vintage Oaks or a Ghost Controls swing arm on a Gruene Road rental, we’ve likely repaired that exact setup before. For models we see less often, we order directly from the manufacturer and keep you posted on timing.
Common Electric Gate Repair Problems We See in New Braunfels Homes
- Post heave from clay-over-limestone soil. New Braunfels sits on expansive clay that swells and shrinks with rain. Gate posts set without deep concrete footings drift out of plumb over a few summers, and the gate binds at the latch or drags on the ground. The fix is resetting the post, not adjusting the operator.
- Powder-coat failure from 100°F-plus summers. Weeks of direct Central Texas sun break down the powder-coat on ornamental iron gates. Once the coating cracks and rust starts, the gate’s weight shifts slightly and the operator strains against it. We repaint and realign before the motor burns out.
- Builder-grade operators hitting end-of-life simultaneously. Gates installed across Veramendi, Vintage Oaks, and Gruene Estates between 2010 and 2020 are reaching the same age at the same time. A gate that “just stopped” is often an undersized operator that should have been replaced two years ago.
- Flood-damaged electronics on riverside properties. Every Guadalupe River rise submerges operators on Gruene Road and River Road properties. Silt packed into hinges and shorted control boards are the real cost behind most post-flood “gate won’t open” reports.
Pricing for Electric Gate Repair in New Braunfels, TX
A gate opener repair in New Braunfels typically runs $240 to $680. Replacing a full operator runs $900 to $1,900 installed. Commercial operators and community entry systems land between $850 and $2,400. Keypad replacement runs $180 to $390. Safety sensor repair or replacement lands around $150 to $320. A remote control programming or replacement is $60 to $160. The biggest variable in this market is whether the original build included proper conduit and a dedicated breaker. If it didn’t, expect some electrical work on top of the gate repair itself. Call (626) 649-4572 for a free estimate with an exact written price before any work begins.
We Also Serve Cities Near New Braunfels
Our New Braunfels customers often refer us to family in Seguin, San Marcos, Cibolo, and Schertz. We run regular routes through those communities for gate motor repair, opener replacement, and post heave correction. Same written-price policy, same 365-Day Done Right Promise, same live person on the phone.
Serving New Braunfels, TX - Our Local Coverage Area
We’re based in the New Braunfels area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in New Braunfels
It’s usually the operator, and often because it was undersized for the panel from day one. Builder-grade operators installed during the 2010-to-present HOA build-out are reaching end-of-life all at once across New Braunfels. We diagnose the operator under load and check the gate’s swing resistance at the hinge posts before recommending a repair or replacement. You’ll get a written price either way. Call (626) 649-4572 and we’ll set a time to assess it.
The control board fails first. Floodwater rises, the board shorts, and the gate stops responding even though the motor is mechanically fine. After that, silt packs into the hinges and the gate slows down, which burns out the operator over time. We dry and replace shorted boards, flush the hinges, and reset the keypad so you can still issue guest codes remotely. Call (626) 649-4572 after any river rise, we run Gruene Road and River Road specifically during flood season.
Yes, every automated gate in Texas should have an entrapment protection system, either photo-eyes that detect an obstruction in the gate’s path, a reversing edge sensor on the leading edge of the gate, or both. We install and align UL-compliant safety sensors on every operator we repair or replace. This matters on rental properties where unfamiliar guests and delivery drivers walk through the gate, and on any property with kids or pets.
Plan for the power run and conduit that should have gone in during construction but usually didn’t. A dedicated 20-amp circuit, proper conduit from the house to the gate post, and a solid post that hasn’t heaved out of plumb in the clay soil. We inspect the post first, then quote the operator, keypad, safety sensors, and electrical work as one written price. The automation retrofit in New Braunfels typically starts around $1,800 and goes up from there depending on the panel, gate weight, and trenching needed.
Yes, if the gate is far from the house and running conduit would cost more than the solar kit. Solar operators work well on low-cycle gates like ranch entries and rural driveways. They’re less reliable on high-cycle gates like short-term rentals or daily commuter driveways, where a panel can’t always keep the battery topped up. We’ll tell you straight which way makes sense for your property. Call (626) 649-4572 if you want us to take a look.
Call Latch & Post Gate Repair for Electric Gate Repair in New Braunfels
If your gate isn’t cycling right, call (626) 649-4572. A live person answers around the clock. We’ll set a time, show up in a uniformed truck, lay drop cloths if we need to step inside, and give you a written price before any work starts. Every repair is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving New Braunfels gate repair needs through the Cedarwell family of independently owned and operated gate specialists.