Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Lucas
An electric gate that won’t open or close on a Lucas acreage property isn’t something you can put off until the weekend. Most homes here sit on one to two acres off roads like FM 3286 or Country Club Road, and when your gate fails, you’re either trapped inside or leaving your horses, kids, and everything else open to the road. We answer calls live at (626) 649-4572, and our techs know Lucas drives. When we roll out to a property on Honey Lane or Rock Ridge, we already know what we’re likely to find: a builder-grade operator straining against a 16-ft horse-trailer gate, or a post the Blackland clay has pushed out of plumb since the last dry spell.
Here’s the short version: most Electric Gate Repair calls in Lucas come down to three things we see week after week. The clay soil shifts posts. The original motor was under-spec’d for the gate’s true weight. And the power run that should have been trenched during the build usually wasn’t. We fix all three, and we give you a written price before any work starts. No exceptions.
Why Latch & Post Gate Repair Is Lucas’s Preferred Electric Gate Company
We’ve been part of the Cedarwell family of independently owned gate specialists since 2009. Lucas is a market we know well because the housing stock here is different from anywhere else in Collin County. Custom builds on acreage, pipe-and-cable ranch gates, ornamental iron slide gates on long private drives, and horse properties with 14-16 ft double openings. That’s not the exception in Lucas. That’s most service calls.
We hear the same thing from Lucas homeowners: the last gate company treated an estate gate like a subdivision shared gate. They spec’d a motor that fit a 10-ft iron gate and bolted it onto a 16-ft pipe-and-cable double leaf meant for a trailer. The motor burned out in eighteen months, or the hinge post racked, or the gate started binding in late August when the clay dried out. We don’t do that. Our Gate Installation - Lucas process matches the operator to the actual gate weight, checks the post footing, and replaces the cheap stuff before it fails again. Cody Beckman, who runs our gate repair crews, is particular about this: measure first, quote second, and never install a part that won’t hold up to North Texas clay.
Every tech who comes to your Lucas home is background-checked, uniformed, and trained on the brands families here actually own: FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. They also follow the Cedarwell C.A.R.E. routine on every visit: clean up like it’s our own home, ask before moving or touching anything, respect quiet hours, and explain the price before the work. Shoe covers and drop cloths go down before we step inside your entry or garage. You get a photo of the clean-up before we leave. That’s standard.
The 365-Day Done Right Promise covers every repair and installation. If it isn’t right, we make it right. No argument, no fine print. And when you call, a live person answers. Not a queue, not a voicemail. That’s true at 2 pm on a Tuesday and at 2 am on a Sunday.
Electric Gate Motor in Lucas
Electric Gate Motor replacement in Lucas is usually a job we diagnose on the first visit because the failure pattern is this specific: the original motor was spec’d for a lighter ornamental iron gate, and it’s been working against a 14-16 ft pipe-and-cable or double swing gate ever since the build. A standard opener replacement for these heavier Lucas gates runs $850-$1,450 depending on the operator class, and most jobs are completed the same day we arrive with the right motor on the truck.
What we check before quoting a motor: the gate’s actual weight with the leaf fully assembled, the condition of the hinge posts, and whether the original power supply is adequate or pulling low voltage under load. On many Lucas properties, the gate leaf has been fine for years, but the motor was never right from day one. We see it on newer developments off Lake Forest Drive where builders installed automation as a checkbox item.
Replacing builder-grade motors on oversized gates
If your Lucas gate is 14 feet or wider and built from pipe-and-cable or heavy iron, a motor spec’d for a 10-ft subdivision gate will never last. We quote the correct operator class for the gate’s true weight, not what the original builder installed. That usually means stepping up to a higher-torque FAAC or BFT unit rated for continuous load on wide leaves.
When the motor is fine but the power isn’t
Some Lucas homes have motors that work, until they don’t, because the original power run was undersized or spliced. We check voltage at the operator terminals before condemning the motor. If the board is getting low voltage under load, we fix the power path first. That’s a $180-$340 repair, not a motor replacement.
Gate Access Control in Lucas
Gate Access Control in Lucas covers the keypads, remote controls, safety photocells, and the control board itself. On acreage properties here, families typically want a code for the kids, a clicker for the truck, and a phone-app option for when the vet or farrier shows up. A basic keypad replacement runs $220-$390, a complete access control retrofit with two remotes and a keypad usually lands between $400-$750, and we’ll put the exact number in writing before we touch anything.
We’re often asked to add automation to a manual pipe-and-cable gate that was installed years ago, before electric was ever trenched to the gate line. That’s a different job than swapping a motor. It means running conduit, setting a proper post footing, and wiring a dedicated circuit, then installing the operator, keypad, and remotes. We plan that out carefully and quote it line by line.
Keypads and remotes on long Lucas drives
Most Lucas driveways are long enough that a keypad at the gate is the difference between getting out of the truck in the rain and not. We stock and program FAAC, BFT, Linear, and Viking keypads and remotes, and we pair them to your existing board on the first visit. We can also add a garage-door-style receiver if your current board was never set up for radio remotes.
Safety photocells on private acreage
Even on a private drive with no public traffic, safety photocells matter if kids, dogs, or horses are anywhere near the gate path. A photo eye that fails and lets a gate close on a person or animal is a liability and a heartbreak. We test the complete entrapment loop, not just the motor output, on every access control call. That’s $95-$180 for a sensor pair, and it’s the cheapest insurance on the property.
Trusted Brands We Service in Lucas
We’re factory-trained on the brands Lucas homeowners actually have bolted to their gates: FAAC, BFT, Linear, and Viking saw the highest call volume in this market, alongside LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because Lucas is a concentrated acreage market with many of the same operators installed across the 90s and 2000s builds, we keep common FAAC and BFT boards, Viking keypads, and Linear remotes stocked for fast turnaround here. That means when your gate drops out on a Saturday morning, we’re not waiting for a board to ship from Dallas. It’s usually on the truck.
Common Electric Gate Repair Problems We See in Lucas Homes
- Blackland clay heave racking swing gate posts. The expansive clay under Lucas holds water through wet winters, then shrinks in summer droughts, pushing set posts out of plumb. By late August, a gate that swung fine in April is dragging its leaf on the gravel. The fix is resetting the post with a deeper bell-bottom footing, not just shimming the hinge.
- Builder-grade motors failing on 14-16 ft horse-trailer gates. Many Lucas properties were built with horse operations in mind, so the gate openings are massive. The original operator was often spec’d for a lighter ornamental gate, then asked to swing a pipe-and-cable leaf built for wind and weight. Motor burnout and stripped gearboxes follow.
- Missing conduit from the original build. If the home was built before automation was considered, there’s often no power at the gate line. Trenching conduit across an acreage property after the fact is a real job. We plan it, quote it, and run it properly, so you don’t end up with an extension cord buried beside the driveway.
- Control board failures after spring storms. Collin County gets hail and ice more often than areas south of DFW, and exposed gate control boxes take direct hits. A power surge or lightning strike near the gate can fry the board in one afternoon. We keep common boards stocked and can usually restore operation the same day we diagnose it.
Pricing for Electric Gate Repair in Lucas, TX
Here’s what Lucas homeowners can expect. A standard keypad replacement runs $220-$390. A safety photocell pair is $95-$180. A control board diagnosis and replacement is $280-$540 depending on brand. Motor replacement on a heavy acreage gate, done right with the proper torque class, lands between $850-$1,450. Adding automation to a manual gate, including power run, post footing, operator, and access control, typically starts around $1,800-$2,600 and we quote every line item. You’ll see the exact number in writing before any work begins. Estimates are free. Call (626) 649-4572 and we’ll get a tech scheduled.
We Also Serve Cities Near Lucas
Latch & Post Gate Repair works out of a Dallas-Fort Worth metro office, with crews serving Lucas directly and neighboring communities across Electric Gate Repair in Lucas and the broader region. Our gate repair service reaches Houston, San Antonio, Dallas, and Fort Worth, with the same written-price and clean-up routine on every job, in every city.
Serving Lucas, TX - Our Local Coverage Area
We’re based in the Lucas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lucas
Yes, in most cases. The gate needs a hinge post with enough footing to carry the added motor torque, a stable opposite post, and a power run to the gate line. If the original build didn’t trench conduit, we’ll plan and quote that as part of the job. A full manual-to-automatic conversion in Lucas typically runs $1,800-$2,600 depending on gate width and power distance. Call (626) 649-4572 and we’ll measure it for free.
The Blackland Prairie clay under Lucas expands when wet and shrinks when dry, and that movement slowly racks concrete-set gate posts out of plumb. By late summer after a dry stretch, the posts have shifted enough that the gate drags or binds. The permanent fix is a deeper bell-bottom footing, not repeated hinge shims. We reset posts at the proper depth and plumb, then rehang the gate.
The motor was likely under-spec’d from the start. We replace it with an operator matched to the gate’s true weight and leaf width, usually a higher-torque FAAC or BFT unit. The cost for this in Lucas runs $850-$1,450 depending on the class we specify, and we install it with the correct limit settings and safety loop. You’ll get the written quote before we order anything.
Yes, if people or animals can be in the gate’s swing or slide path. A closing gate on a 16-ft leaf has a lot of force, and a failed photo eye is how kids and dogs get hurt. We install and test photocells as part of every access control and motor replacement job. A sensor pair costs $95-$180.
Lightning strikes and power surges during Collin County’s spring storms commonly travel through the gate’s power line and fry the control board. If the board is dead after a storm, that’s usually the culprit. Board diagnosis and replacement runs $280-$540, and we often have common FAAC, BFT, and Linear boards stocked for same-day install. Call (626) 649-4572 and we’ll confirm what’s on the truck before we head out.
Call Latch & Post Gate Repair in Lucas, TX
If your electric gate is binding, dead, or dragging its leaf across the gravel, call us at (626) 649-4572. A live person answers, day or night. We’ll get your gate details, schedule a tech, and have a written price for you before any work starts. Every visit includes the clean-up photo, the shoe covers, and the 365-Day Done Right Promise. That’s how we work in Lucas.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Lucas since 2009.