Electric Gate Repair in Lantana - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Electric Gate Repair Across Lantana

Electric gate repair in Lantana typically runs $95 to $225 for a service call and diagnosis, with most opener and control board repairs landing between $250 and $680. The salt air off the Lake Worth Lagoon means our Lantana calls lean heavily toward corroded motor housings, seized hinges, and control boards that would have lasted years longer five miles inland. We answer live around the clock at (626) 649-4572, and we’ll give you a written price before any work starts. Our Electric Gate Repair team knows exactly what Lantana’s older canal-front gates are up against, because we work on them every week.

Call (626) 649-4572

Why Latch & Post Gate Repair Is Lantana’s Preferred Electric Gate Repair Company

Lantana homeowners call us because we focus on one trade: gates. Not landscaping, not general handyman work. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on. Our technicians are background-checked, uniformed, and factory-trained on the brands families in Lantana actually own: Linear, DoorKing, Ghost Controls, and Viking among them. When we step onto a property off Ocean Avenue or along Hypoluxo Road, we put on shoe covers before we go inside, lay drop cloths where we work, and send you a photo of the clean-up before we pull out of the driveway. That’s the Cedarwell C.A.R.E. routine: clean up like it is our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work. It’s built into every visit, not offered as an add-on.

We’ve been doing this since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. The 365-Day Done Right Promise covers every repair and installation we perform in Lantana. If it’s not done right, we make it right. No argument, no fine print. When you call, a live person picks up, 24 hours a day, 7 days a week. No voicemail tree.

Electric Gate Motor in Lantana

An Electric Gate Motor in Lantana works harder than it would almost anywhere else in Palm Beach County, and the reason is simple: year-round salt air off the Lake Worth Lagoon attacks motor housings, terminations, and internals from every direction at once. A motor repair here typically involves replacing corroded start capacitors, cleaning or swapping burned contacts, re-terminating wires that have turned green at the connector, and in many cases rebuilding or replacing the motor housing seal so moisture stops getting where it doesn’t belong. Most motor repairs on Lantana residential gates run between $280 and $560.

Signs a Motor Is Failing

A gate that clicks but doesn’t move, hums loudly, or trips its breaker whenever it starts is telling you the motor is pulling too many amps. In Lantana we see this most often on slide-gate operators mounted inches above canal-side concrete, where humidity and salt mist settle into the windings. If the motor is older than 12 to 15 years and the housing shows heavy pitting, replacement is often the cheaper long-term answer than repeated rebuilds.

What Repair Actually Involves

Our techs bench-test the motor, check amp draw against the nameplate rating, and inspect the gearbox oil if the operator has one. We’ll tell you honestly whether a seal replacement and rewire will buy you real years, or whether the corrosion has gone far enough that you’re paying for a rebuild that won’t hold. You get that assessment in writing before we turn a single screw.

Gate Access Control in Lantana

Gate Access Control in Lantana often means retrofitting entry systems onto gates that were never designed for automation, especially the mid-century canal-front homes built from the 1950s through the 1970s along masonry and concrete-block fences. Keypads, radio receivers, loop detectors, and intercoms get added to posts that were poured to hold a manual gate leaf, not the vibration and torque of an operator. When the post flexes or heaves, the access control wiring shifts with it, and connections loosen. Access control repairs here typically run $180 to $480, depending on what’s failed and whether the post needs re-anchoring first.

Keypad and Receiver Replacement

Older keypads mounted on sun-exposed west-facing pilasters crack and fade, and the internal contacts corrode from salt air. Replacing a keypad and reprogramming it to an existing operator usually runs $160 to $280 in Lantana. We stock parts for DoorKing and Linear systems locally, so we’re not waiting on a shipment from out of state when your gate won’t open for the school pickup.

Phone and Smartphone Entry Systems

Families in Lantana increasingly want the gate to open from a phone instead of a clicker on the sun visor. We install and service app-based and call-to-open entry modules that integrate with your existing operator, including older LiftMaster and Elite units. A proper wiring integration, not a hack job, takes our techs about half a day and runs $350 to $600 including the module and programming.

Trusted Brands We Service in Lantana

We’re factory-trained on the equipment Lantana gates actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters here because coastal installers historically favored Linear and DoorKing on mid-century homes, while newer construction and retrofits skew toward LiftMaster and Ghost Controls. We carry common control boards, photo-eyes, capacitors, and remote receivers for these brands, which lets us complete most Electric Gate Repair in Lantana jobs in a single visit rather than two.

Common Electric Gate Repair Problems We See in Lantana Homes

• Seized hinges from omnidirectional salt air. The Lake Worth Lagoon wraps Lantana’s eastern edge and threads canals through residential streets, so hardware corrodes from every side, not just the ocean breeze. Mild-steel hinges that would survive a decade in Lake Worth seize in half that time here.
• Obsolete control boards with no entrapment protection. Many 1990s operators around Lantana still run boards that predate UL 325. They work until a gear strips or a child or pet gets near the closing gate, and then there’s no functioning photo-eye to stop it. We strongly recommend retrofitting a modern board and safety edges on any legacy operator still in daily use.
• Heaving canal-front posts throwing slide gates out of track. High water tables under canal-front lots cause concrete footings to lift and settle seasonally. The gate post moves a half-inch and suddenly the slide gate binds mid-travel, reverses, or throws the rack off the pinion entirely.
• Post-storm failures June through October. Hurricane-season gusts above 60 mph hit Lantana gates that are already weakened by corrosion. Hinges shear, operators tear off their mounts, and bent gate leaves are common after any named storm passes within 50 miles of the coast.

Pricing for Electric Gate Repair in Lantana, TX

We Also Serve Cities Near Lantana

While this page is written for Lantana homeowners, our crews also handle electric gate repair in Houston, San Antonio, Dallas, and Fort Worth. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with technicians serving Lantana locally. If you’re in a neighboring community, the same 365-Day Done Right Promise applies.

FAQs About Electric Gate Repair in Lantana