Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Lakeway
Electric gate repair in Lakeway usually comes down to two things: the operator doing the work and the post footing underneath it. In this part of the Hill Country, those footings hit limestone far sooner than builders expected, which means the gate sags, the motor strains, and the repair is rarely as simple as swapping a board. We serve Lakeway homeowners with factory-trained technicians who check the post, the hinge, the power run, and the operator on the first visit, not the third. Call (626) 649-4572 for a written price before any work begins.
Why Latch & Post Gate Repair Is Lakeway’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family and has been operating since 2009. Our focus is narrow: gate repair, gate installation, and electric gate repair. That focus matters in Lakeway because the homes here don’t have builder-basic front doors with a buzzer. They have ornamental iron estate gates on sloped driveways, HOA-controlled community entries, and automation systems that need to work every time the family pulls in or the kids walk out to the mailbox. When a Lakeway homeowner calls us, a live person answers, 24 hours a day, seven days a week. No voicemail. No callback queue.
We know the original 1970s and 80s Lakeway platted sections near the lake, and we know the newer master-planned neighborhoods like Rough Hollow and Serene Hills where 2000s-2020s luxury construction sits on shallow limestone. Homeowners across Lakeway tell us the same thing: their builder-grade operator failed early, the gate began to drag, and another company quoted a hinge replacement without ever checking whether the post was still plumb. Cody Beckman, who leads Latch & Post Gate Repair, trains every technician to start with the post footing and the power run precisely because Lakeway’s geology makes those the root cause far more often than anywhere else in Travis County.
Electric Gate Motor in Lakeway
Electric Gate Motor work in Lakeway typically means replacing or servicing the swing arm or slide operator that opens and closes the driveway gate. In the Rough Hollow and Serene Hills neighborhoods, most gates were built between 2005 and 2020, and the builder-grade operators installed at the time, often LiftMaster or Linear, were sized for flatter lots and softer soil. On Lakeway’s steep limestone terrain, those motors cycle against improperly anchored hinge posts and burn out years early. A typical gate motor replacement in Lakeway runs $450 to $1,200 depending on the operator model and whether the mounting arm and bracket also need correction.
Builder-Grade Operator Replacement
Many Lakeway homes still have their original builder-installed operator, and by year five or six it is working twice as hard as it should. The repair is not just unbolting the old motor and bolting on a new one. The hinge post has to be plumb, the gate has to swing freely through its full arc, and the operator arm needs a solid anchor point. Cody Beckman’s crews replace builder-grade units with operators matched to the gate’s actual weight and swing radius, then run a full open and close cycle while watching the post, not just the motor.
Operator Retrofit for Manual Gates
Lakeway has a large number of gate posts that originally held a manual iron gate, and homeowners who decide to add automation later find out the hard way that the power and conduit were never run during the build. Trenches disappear under Hill Country rock, existing low-voltage wiring turns out to be landscaping cable, and there is no dedicated circuit. Retrofitting automation properly means running new conduit, setting a proper post depth or reinforcing the existing footing, and then installing the operator so it does not fight the gate from day one. Budget $1,800 to $3,600 for a complete motor-and-power retrofit on a Lakeway driveway gate.
Gate Access Control in Lakeway
Gate Access Control in Lakeway covers more than the keypad and the clicker. It is the whole system that decides who gets in: keypads, remotes, vehicle sensors, safety photocells, and the control board that ties them together. Lakeway’s HOA communities along Lohmans Crossing and the resort-era sections near Lakeway Boulevard often have shared community entry gates with access control hardware that sees hundreds of open-close cycles a day. When a keypad stops accepting codes or a remote loses range, the board and the antenna wiring matter as much as the keypad itself.
Keypad and Remote Control Repair
We replace and reprogram keypads, remotes, and receivers on Lakeway gates every week. A keypad that only works from three feet away usually has an antenna or receiver issue, not a worn keypad. Our technicians test the signal path at the board, not just the button in the driver’s hand, and we program new remotes while you watch. Simple keypad replacement starts around $180; a receiver or board-level fix runs $250 to $650 depending on the system.
Safety Sensor and Control Board Diagnostics
Every automated gate in Texas is required to meet UL 325 entrapment protection standards, which is a real safety consideration when kids or pets are near the gate. Lakeway gates older than the 2016 code update often lack current photocells or contact edges. We test the entire entrapment protection loop on every access control repair, and when a control board fails we diagnose whether the board failed on its own or was damaged by a short elsewhere in the wiring. Board replacement on a common residential operator runs $300 to $800, and the written quote covers the exact board part number before we order it.
Trusted Brands We Service in Lakeway
Our technicians are factory-trained on the equipment Lakeway homeowners actually have on their gates. That includes LiftMaster operators in the newer master-planned sections, Linear units on older estate entrances, and Viking, DoorKing, and Ghost Controls hardware on heavier ornamental iron gates. We do not treat every opener like the same box. A DoorKing swing operator on a lakefront gate has a different torque curve and limit switch arrangement than a Ghost Controls unit on a back pasture gate, and the technician who shows up should know the difference before the toolbox opens. For Lakeway jobs we keep the most common Viking and LiftMaster replacement boards and limit switches in local stock, which shortens turnaround when a gate is stuck closed on a Sunday.
Common Electric Gate Repair Problems We See in Lakeway Homes
- Post footings hitting limestone before standard depth. Builders in the 2000s-2020s wave rarely saw the bedrock until the auger stopped at 16 to 18 inches, and the result is a post that racks outward after one wet storm season. The gate drags across the apron, and the operator burns itself out trying to push through the bind.
- Builder-grade operators cycling against a sagging hinge post. We see this most in Rough Hollow and Serene Hills, where the original LiftMaster or Linear motor was undersized for a heavy ornamental iron gate on a slope. Replacing the motor without correcting the post means the new motor fails the same way two years later.
- Automation added later with no dedicated power run. Lakeway has beautiful iron gates that spent their first decade as manual gates. When automation goes in afterward, homeowners commonly find exposed low-voltage wire, no conduit, and no spare circuit. A proper retrofit means trenching, conduit, and a home run to the panel.
- Rust and oxidation accelerated by lake humidity. Homes along the Lake Travis shoreline, from Rough Hollow down to the older lakefront lots near Hurst Creek, deal with faster rust on hinge hardware and operator brackets. Salt air is not the issue here; persistent high humidity off the lake is. We replace corroded brackets and treat hinges before they seize.
Pricing for Electric Gate Repair in Lakeway, TX
Our Lakeway service calls start with a written price before any work begins. There is no diagnostic fee that becomes a surprise invoice later. Here are the ranges we quote most often on this side of the lake:
- Service call and diagnostic visit: $89-$149, applied toward the repair if you approve the work
- Gate motor replacement (operators only, no post work): $450-$1,200
- Hinge post re-plumb and footing repair: $600-$1,800 depending on whether we are replacing one post or setting a new footing in limestone
- Full automation retrofit with new conduit and power run: $1,800-$3,600
- Keypad or safety sensor replacement: $180-$450
- Control board replacement: $300-$800 with the exact board part number listed on the quote
Every quote includes shoe covers and drop cloths if we step inside the home, and we email you a photo of the clean-up before our technician leaves the property. The price on the written quote is the price for the job. Call (626) 649-4572 to schedule a free measure and estimate, because the free estimate is not a teaser rate: it is the same written number you would pay that afternoon.
We Also Serve Cities Near Lakeway
Our Electric Gate Repair team works throughout the greater Hill Country and broader Texas metro areas. For residents just outside Lakeway, we also accept service calls in Houston, San Antonio, Dallas, and Fort Worth with the same written-price policy and Cedarwell Care Promise on every job.
Serving Lakeway, TX - Our Local Coverage Area
We’re based in the Lakeway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lakeway
Because the original builds rarely included the power and conduit runs that a gate operator needs. When those neighborhoods were developed between 2005 and 2020, automation was an upgrade, not a standard, so manual gates got no conduit, no dedicated circuit, and post footings set at whatever depth the limestone would allow. Adding automation later means trenching new conduit, running power from the house or a subpanel, and often re-setting the hinge post to hold the operator’s load. Call (626) 649-4572 for a free measure and a written retrofit estimate.
The operator is rarely the first thing to fail. Lakeway’s shallow limestone means hinge posts often sit only 16 to 18 inches deep, and after a wet storm season the post racks outward, dragging the gate lower until it scrapes the apron. The motor then strains against the bind and eventually fails, but the sag came first. That is why our Lakeway repair visits start with checking post plumb and footing integrity before we spend a single minute on the operator.
Yes. Every automated gate in Texas, including residential driveway gates in Lakeway, must meet UL 325 entrapment protection standards. That means operational safety photocells, contact edges or an equivalent sensing system, and a control board that responds correctly when the gate encounters an obstruction. If your Lakeway gate dates from before the 2016 code update, it may lack current entrapment sensors. We test the full safety loop on every gate we touch, and we will show you the results before we change anything.
Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Lakeway the most common service calls involve LiftMaster and Linear operators from the 2005-2020 building wave, plus Viking and DoorKing equipment on the heavier ornamental estate gates. We do not substitute generic parts on these systems. The quote always names the exact part number from the correct manufacturer.
It can, but Lakeway’s tree cover and lot orientation decide whether solar is actually reliable for your specific gate. Heavily treed lots in the original lakefront sections near Hurst Creek and along parts of Serene Hills may not get enough direct sun for a dependable solar operator, and a gate that fails to open on a cloudy week is worse than no automation at all. We assess the sun path and battery draw before recommending solar, and we will tell you honestly if a trench and a home run to a dedicated circuit is the better long-term fix.
Call Latch & Post Gate Repair for Electric Gate Service in Lakeway
A live person answers our phone 24 hours a day, seven days a week. We will schedule a visit to your Lakeway property, measure the gate, assess the footing and the power run, and put a written price in your hand before any work starts. Our technicians wear shoe covers, lay drop cloths where they step inside, and send you a photo of the clean-up before they leave. Every repair and installation is covered by the 365-Day Done Right Promise: if it is not right, we make it right. Call (626) 649-4572 for a free estimate, or to have a technician out to your gate this week.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, a Cedarwell family gate specialist serving Lakeway since 2009.