Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Lake Jackson
Electric gate repair in Lake Jackson typically runs $85 to $145 for a service call and diagnosis, with most common repairs falling between $185 and $540 depending on the component. We dispatch technicians to Lake Jackson neighborhoods from Clute to Oak Forest every weekday, and for emergencies we can usually reach your property the same day. If your gate is stuck half-open, beeping, or refusing to respond to the remote, call us at (626) 649-4572 and a live person will answer, day or night.
Lake Jackson’s gate problems are not like the ones we see in Houston, 45 miles north. The salt air, the flood cycle, and the tight shared driveways of the old Dow-planned blocks create a specific set of failures that a generic gate company may misdiagnose. We know these streets, we know how the original slide gates were built, and we know what it takes to keep cars and people moving while the repair is underway.
Why Latch & Post Gate Repair Is Lake Jackson’s Preferred Electric Gate Repair Company
Latch & Post has worked on gates across Brazoria County since 2009 as part of the Cedarwell family of gate specialists. When a Lake Jackson homeowner calls about a flooded operator or a seized hinge post, our technician already knows to check for salt pitting before anything else. That kind of local familiarity saves you the cost of a second visit and a second guess.
Our crews have repaired gates in the Dow-era subdivisions around Oyster Creek Drive, along This Way and That Way, and in the neighborhoods off Highway 288 between Clute and Angleton. We are trained on the brands actually installed on Lake Jackson gates: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Every technician is background-checked and uniformed. They arrive with shoe covers and drop cloths, and they will never track mud or grease onto your floors or driveway apron.
Response time to Lake Jackson is fast because dispatch is coordinated from the brand’s Dallas-Fort Worth office, with crews that serve Lake Jackson locally. Emergency calls from a submerged gate motor or a broken slide gate rack get answered by a live person around the clock. You will not sit through a voicemail queue while your gate blocks the only way out.
Gate Access Control in Lake Jackson
Gate access control in Lake Jackson means the keypad, remote receiver, intercom, or phone-app module that tells your gate motor when to open and when to stay closed. On a shared driveway in a mid-century neighborhood, that system is the only thing standing between a family car, a guest, and a gate that will not move. When a keypad corrodes or a receiver board burns out, you are not just locked out, you are blocking your neighbor’s only approach.
Keypad and Remote Repair
A salt-corroded keypad on a Dow-era gate post is one of the most common access control failures we see in Lake Jackson. Keypads start to read buttons intermittently or not at all after enough humid seasons. We replace or recondition the keypad, confirm the receiver is synced, and test the full cycle at least three times before we close the service ticket.
Intercom and Phone-Entry Upgrades
Many Lake Jackson homeowners add a phone-based entry module so they do not have to hand a keypad code to every neighbor, meter reader, and delivery driver. We install and wire these systems on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. The work is quoted in writing before we start, and we always explain the price before anyone touches a control board.
Commercial Gate Operator in Lake Jackson
A commercial gate operator in Lake Jackson may protect a small office off Oyster Creek Drive, a church on Pecan Street, or an HOA entrance on the edge of town near Clute. These operators cycle hundreds of times a week, and they sit in the same salt air and floodwater as every other gate in Brazoria County. When a commercial operator fails, the downtime is measured in blocked deliveries and angry tenants, so diagnosis needs to be fast and precise.
Heavy-Duty Operator Repair and Replacement
Commercial operators in Lake Jackson often run on FAAC or BFT hydraulic or electromechanical units that need a technician who knows the torque curves and limit-switch tolerances for the exact model. We stock common boards, capacitors, and limit switches for the brands Lake Jackson businesses actually use. A typical commercial operator repair runs $380 to $1,100, depending on whether we are replacing a capacitor or a full control board plus a flooded motor housing.
Safety Edge and Loop Detector Work
No commercial gate should run without working safety edges and loop detectors. On Lake Jackson’s shared approach driveways, a malfunctioning loop detector can let the gate close on a car. We test photocells, edge sensors, and ground loops on every visit. When we replace a part, we show you the removed component and explain what failed. The 365-Day Done Right Promise applies whether we are repairing a residential keypad or rebuilding a commercial operator.
Trusted Brands We Service in Lake Jackson
We service the brands already installed on Lake Jackson gates: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. You will not hear us say that your existing operator is too old to fix just because we would rather sell you a new one. We stock local parts for the most common FAAC, BFT, and Linear boards, so a repair visit is usually one trip, not three. If your gate runs on a brand not on this list, call us at (626) 649-4572 and we will tell you honestly whether we can help.
Common Electric Gate Repair Problems We See in Lake Jackson Homes
- Submerged gate operators on low posts. In the original Dow-planned blocks, many automatic gate motors were mounted on low masonry or iron posts near grade. When a low-lying street floods, the motor housing fills with water and the operator shorts out. One heavy rain can leave a cluster of dead gate motors along the same vintage street, and we see those calls spike after every tropical event.
- Salt-air hinge and latch seizure. Lake Jackson sits roughly 12 miles from the Gulf. The constant salt-laden humidity pits and seizes gate hinges and latch mechanisms in five to seven years, far faster than inland Texas. A gate panel that looks straight but sags when it swings is almost always a seized hinge post, not a bent frame.
- Slide gate rack and pinion wear. Many Lake Jackson driveways are shared approaches with no swing radius, so slide gates do all the work. The rack, pinion, loop detector, and safety photocell on a slide gate take constant abuse on these tight lots, and the wear shows up as grinding, jerking, or stops mid-travel.
- Remote control and receiver failures. Humidity works its way into remote fobs and receiver boards too. A remote that works only within ten feet of the gate, or a receiver that drops its programming, is a routine repair here. We replace or reprogram on the first visit when the part is in stock.
Pricing for Electric Gate Repair in Lake Jackson, TX
Our service call and diagnosis in Lake Jackson runs $85 to $145. A standard hinge and latch replacement with lube and adjustment lands around $185 to $320. Gate motor repairs, including flooded-operator replacements, run $280 to $680 depending on the motor type and how much of the housing needs replacement. Control board replacement for a LiftMaster, FAAC, or BFT system runs $240 to $540, and full commercial operator replacement runs $1,500 to $4,800 installed. Every job, from a keypad repair to a full automation rebuild, includes a written price before any work starts, and you approve that number before we touch a single component. No pressure, no surprises, and the 365-Day Done Right Promise backs it all.
We Also Serve Cities Near Lake Jackson
Our Electric Gate Repair crews work in Lake Jackson daily, and we also serve Clute, Freeport, Angleton, and Alvin. If you are on the edge of town or just outside the city limits, call (626) 649-4572 and we will confirm coverage. For a full picture of what our repair service includes, see our main Electric Gate Repair in Lake Jackson page.
Serving Lake Jackson, TX - Our Local Coverage Area
We’re based in the Lake Jackson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Jackson
Yes. We repair slide gates every day in Lake Jackson, and a slide gate is usually the only option on a tight shared driveway. The repair work happens on the existing track, rack, pinion, and motor, so no additional swing clearance is ever needed. The same answer goes for gates where the driveway is shared with a neighbor; we keep the gate working during the repair whenever possible. Call (626) 649-4572 and describe your gate setup, and we will give you a written price before we begin.
The operator likely shorted because the motor housing sits close to grade, and in Lake Jackson’s Dow-era neighborhoods that means water reached the electrical components before it ever bent or damaged the gate panel. A flooded motor will trip its breaker or burn its board even when the gate structure is untouched. We opened a LiftMaster on Oak Drive after a flood that had sat in standing water, and the motor was dead while the gate itself was perfectly straight. The fix is a new operator on a raised post footing, and we set these higher to keep the housing clear of grade on the next flood. Call (626) 649-4572 for a free estimate, and we will check the mounting height while we are there.
In Lake Jackson the likely culprit is salt-air seizure of the hinge or latch mechanism, not a bent panel. Twelve miles from the Gulf, hinge pins and latch boxes pit and seize in five to seven years. The panel stays straight while the hinges refuse to carry the weight evenly, producing the sag. We free or replace the seized hinge, reset the panel, and coat the moving parts so they last longer. It is a common repair here, and we can usually do it in one visit. Call (626) 649-4572 and we will give you a written price before we start.
Yes. We are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock local parts for the brands most often installed on Brazoria County gates. That means less waiting on a part from a distant warehouse and more one-trip repairs. If your gate runs on something rare, we will tell you honestly and tell you if we can still help. Call (626) 649-4572 with the brand name and we can usually confirm availability on the call.
Usually yes. For a slide gate that has failed on a shared driveway, we can often manually release the operator and secure the gate in the open position while we work, so your cars and your neighbor’s cars keep moving. Where that is not safe, we will say so plainly and give you a timeline. The goal is always to restore access, not to add a second problem. Call (626) 649-4572 for a free estimate, and we will walk through exactly how we will handle your driveway during the repair.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Lake Jackson since 2009.