Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Hickory Creek
Electric gate repair in Hickory Creek usually means one of two things: a motor that quit, or a gate that binds because the post underneath it moved. Most calls we take from this side of Lake Lewisville come from homeowners whose gates were installed when the house was built, which puts a lot of them in the 15-25 year range where motors, control boards, and posts fail close together. We work on those systems every week, and we know what the lakeside humidity and the Blackland Prairie clay do to them. If your gate is grinding, sagging, or refusing to open, call us at (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is Hickory Creek’s Preferred Electric Gate Repair Company
We’re a Cedarwell-family gate specialist, and we’ve been doing this since 2009. That matters in Hickory Creek because the gates out here aren’t the standard suburban units you see inland. They’re heavier, often custom fabricated, and they sit on soil that moves. Our technicians, led by Cody Beckman, arrive in uniform, wear shoe covers inside your home, and lay down drop cloths before touching anything. You get a written price before the first tool comes out, and every repair is covered by our 365-Day Done Right Promise: if it isn’t right, we make it right, no argument and no fine print.
We answer calls around the clock with a live person. No voicemail, no callback queue. When a gate is stuck open with a dog in the yard or stuck closed with a car inside, that matters more than any marketing line.
Gate Access Control in Hickory Creek
Gate Access Control in Hickory Creek means more than a keypad on a post. On this side of the lake, it often involves a matched intercom, a camera at the driveway, and a keypad or telephone entry unit that has to talk to an operator that may be 15 years old. When any one of those stops talking to the others, the gate either won’t open from the house, won’t respond to a remote, or lets someone in it shouldn’t. We diagnose the whole loop, not just the piece that beeped.
Keypad and intercom pairing
A keypad that works intermittently is usually a wiring or receiver issue, not the keypad itself. We trace the signal path from the entry station to the control board before recommending a replacement. That saves you from buying a keypad you didn’t need.
Safety sensor alignment on paired gates
On lake-adjacent properties with a main driveway gate and a secondary boat-launch or pedestrian gate, each system has its own safety loop. When one post heaves, the photocell beam drifts out of alignment and the gate reverses or refuses to close. We realign the beam and re-level the post rather than bypassing the sensor, because a bypassed sensor on a heavy gate is dangerous.
Commercial Gate Operator in Hickory Creek
Commercial Gate Operator work in Hickory Creek shows up at community entrances, marina access points, and a handful of small business lots near I-35E. These operators are bigger than residential units and they cycle far more often, so the wear concentrates in the gearbox, the limit switches, and the loop detectors. We service FAAC, BFT, and Linear commercial operators, and we stock common boards and remotes for them so a Hickory Creek business isn’t waiting a week on a part.
Operator replacement versus rebuild
When a commercial operator fails, the question is whether the motor and gearbox can be rebuilt or the whole unit needs to swap out. We’ll tell you straight which one applies, with a written number for both before we start. Most rebuilds run $650-$1,200; a full operator replacement typically lands between $1,800 and $3,500 depending on the gate’s weight and cycle rate.
Loop detector and safety edge work
Commercial gates in Hickory Creek need working loop detectors in the pavement and a functioning safety edge on the gate itself. If either fails, the gate either won’t open for an arriving vehicle or won’t stop for one leaving. We test both on every commercial call and replace what’s dead.
Trusted Brands We Service in Hickory Creek
We’re Electric Gate Repair specialists, which means we don’t guess at a brand. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry common boards, remotes, and receivers for these brands on our trucks serving Hickory Creek. For the lakeside houses that run FAAC slide gates on a boat launch and LiftMaster on the driveway, that means one call handles both instead of two appointments.
Common Electric Gate Repair Problems We See in Hickory Creek Homes
- Binding swing gates from clay heave. The Blackland Prairie clay under Denton County swells in wet springs and shrinks in summer drought, which pushes hinge posts out of plumb. A heavy ornamental iron gate that’s even a quarter-inch out of level will drag, strain the operator, and eventually burn out the motor.
- Corroded hinges and actuator arms near the lake. Persistent lakeside humidity accelerates rust on steel hardware. We see gates that are only 12 years old with hinge pins and arm brackets that look 20. Replacing those early costs less than waiting until the gate sags onto the driveway.
- Ice-storm damage to gear housings and batteries. The February 2021 storm that hit Denton County cracked plastic gear housings on automated openers and drained battery backups. The drought that followed re-shifted posts that ice had already moved. Some gates failed twice in one year for two entirely different reasons.
- Dead secondary gate systems. Lake-adjacent properties often have a boat-launch or pedestrian gate in addition to the main driveway gate. That second gate is usually older, maintained less, and more exposed to the water. When we’re called for one gate, we check the other because the same moisture and soil movement affect both.
Pricing for Electric Gate Repair in Hickory Creek, TX
In Hickory Creek, a standard gate motor repair runs $180-$340. Keypad replacement or receiver work typically lands between $150 and $280. A control board swap on a LiftMaster or FAAC operator ranges from $250-$550. Hinge post resetting on a heaving gate, which is common here because of the clay, runs $400-$900 depending on the post size and how much concrete work is involved. If you need a full operator replacement, most residential jobs in Hickory Creek fall between $1,200 and $2,800. Every job gets a written price before work starts, along with shoe covers and drop cloths inside the house and a photo of the cleanup before we leave. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Hickory Creek
While this page is focused on Hickory Creek and the cove-facing neighborhoods around Lake Lewisville, we receive regular calls from nearby communities. Our technicians serve Houston, San Antonio, Dallas, and Fort Worth as well. If you’re just outside Hickory Creek, give us a call and we’ll confirm coverage and response time for your address. You can also learn more about what we do across the region on our Electric Gate Repair in Hickory Creek page.
Serving Hickory Creek, TX - Our Local Coverage Area
We’re based in the Hickory Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Hickory Creek
It’s usually the gate, not the motor. The Blackland Prairie clay under Hickory Creek heaves in wet seasons and shrinks in drought, pushing the hinge post out of plumb. When the post shifts, the gate drags and the motor strains trying to move weight it was never balanced for. We check the post level and gate alignment first, because replacing a motor without fixing the post just burns out the new one. Call us at (626) 649-4572 and we’ll diagnose it properly.
Persistent lakeside humidity from Lake Lewisville sits on bare steel hardware year-round. Hinge pins, actuator arms, and exposed control-board terminals corrode much faster on cove-facing streets than they do a few miles inland in Lewisville or The Colony. We replace rusted hinge pins and arm brackets before the gate sags, and we can apply corrosion-resistant coatings where the original finish has worn through.
Yes, and we recommend checking both on every visit. Because cove-facing Hickory Creek addresses often have a main driveway gate plus a boat-launch or pedestrian gate, and the second gate is usually older and less maintained, it tends to fail right after the first one gets fixed. The same humidity and clay movement affect both systems. A single visit that inspects both costs less than two separate service calls.
Probably not. The February 2021 ice storm cracked plastic gear housings and drained battery backups across Denton County, and the freeze-thaw cycle can also shift a sensor bracket far enough to misalign the photocell beam. That misalignment makes the gate reverse or refuse to close. We realign the beam and check the wiring before messing with any code settings. It’s a mechanical issue most of the time.
We reset the post with a deeper footing and proper drainage, then re-level the gate and retune the operator’s limits so the motor isn’t fighting the bind. Clay heave is a recurring problem here, so the fix has to address the soil movement rather than just shimming the hinge. On a cove-facing street off Lakeview Drive, we reset a hinged post that had heaved out of level enough to bind a rack-and-pinion LiftMaster operator; same visit we serviced the homeowner’s secondary FAAC slide gate before the humidity seized it further.
If your gate is grinding, sagging, or not responding in Hickory Creek, call Latch & Post Gate Repair at (626) 649-4572. A live person answers, the estimate is free, and the price you’re quoted is the price you’ll see in writing before any work begins.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Hickory Creek since 2009.