Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Fulshear
Electric gate repair in Fulshear typically runs $185 to $480 for common fixes like opener motors, keypads, and safety sensors, with control board replacements landing between $350 and $740. Most jobs we handle are done in a single visit, and every price is written down before we touch a single part. If your gate is stuck open, stalled halfway, or refusing to close at the Cross Creek Ranch entrance, call (626) 649-4572 and a live person answers, day or night.
We know the Fulshear gate problem better than most because we see it every week. This city grew fast, and the hardware didn’t all get a chance to settle in properly. Between the black-clay soil shifting posts and the humidity working on circuit boards, Fulshear gates fail in predictable ways. That’s useful when you’re the one standing in the driveway at 6:40 a.m. trying to get out.
Why Latch & Post Gate Repair Is Fulshear’s Preferred Electric Gate Repair Company
Fulshear homeowners call us because we’re a gate specialist, not a general contractor who sometimes looks at openers. Every technician who comes to your home in Fulshear for Gate Installation - Fulshear or repair is factory-trained on Linear, Viking, Ghost Controls, and DoorKing equipment, which covers most of what’s installed in Cross Creek Ranch, Polo Ranch, and Fulshear Lakes. We carry the boards, arms, and sensors that match this city’s hardware, so the fix usually happens on the first trip.
We’re part of the Cedarwell family, and we’ve been doing this since 2009. The 365-Day Done Right Promise rides on every repair we make in Fulshear: if it’s not right, we make it right. No argument, no fine print. The technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every visit. That means shoe covers and drop cloths before we step inside, asking before we move anything, and a photo of the cleanup before we leave. Your floors stay clean, your kids stay undisturbed, and you get a straight answer on price.
Most Fulshear gate repairs we schedule within a day or two, and emergencies we route as fast as a truck can get there from our Houston dispatch. The phone rings to a person, not a voicemail tree, 24 hours a day. That matters when a gate has failed open and the dogs are loose.
Commercial Gate Operator in Fulshear
Commercial gate operators in Fulshear handle the entrance gates at community entry points, ranch access roads, and the private streets behind the newer master-planned sections. These units cycle dozens or hundreds of times a day, so when a commercial operator fails, it’s not a quiet inconvenience; it’s a backed-up line of cars and an angry HOA board. We work on slide and swing commercial operators from DoorKing, Linear, and Viking, and we stock the high-wear parts these units burn through: limit switches, drive chains, loop detectors, and capacitor packs.
Wide Gates and Heavy-Duty Cycles
A commercial gate operator in Fulshear is sized for the gate’s weight and width, not just its brand. Homes on acreage and ranch entrances with 16-foot or wider gate panels need operators with enough torque to move that mass without stalling. We size replacements properly, and we check the post and hinge geometry before bolting anything in place.
Loop Detectors and Access Wiring
When a community gate opens for one car but not the next, the problem is usually the loop detector or the wiring feeding it. Fulshear’s clay soil and seasonal moisture mean underground runs need to be properly sealed, or corrosion works its way into the splice points. We test the loop, the detector, and the conduit before recommending a fix, so you don’t pay for a new operator when the real problem was a $60 splice.
Gate Opener Repair in Fulshear
Gate opener repair in Fulshear usually means one of three things: the motor has worn out, the control board has failed, or the gate itself has shifted and the opener is fighting a post that’s no longer plumb. Most residential opener repairs here run $185 to $420 for motors and gears, and $350 to $740 when the board is the problem. We give you the number in writing before the work starts, and we don’t start until you approve it.
Solar Openers on Long Driveways
Plenty of Fulshear acreage homes run solar gate openers because running mains power hundreds of feet to the gate pad costs more than the operator itself. Solar systems live or die by the battery bank and the panel’s wiring. Humidity corrodes terminals, and shaded panels under live oaks don’t charge. We see a lot of calls where the operator is fine but the battery is dead. We test the panel output, the charge controller, and the battery, then tell you exactly which part failed before recommending a fix.
Post-Harvey Replacements Aging Out
If your gate operator was replaced in late 2017 or 2018 after Harvey flooded your section of Fulshear, that operator is now seven or eight years old. Brushed DC motors and control boards fail right around this age, especially in Brazos-adjacent neighborhoods where humidity never really leaves. We stock replacement motors and boards for the brands installed during that insurance-driven wave, so we can often repair in one visit instead of ordering parts.
Trusted Brands We Service in Fulshear
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and for Fulshear specifically we keep a deep bench of Linear and DoorKing parts because those brands dominate the spec sheets in this city’s newer builds. Viking and Ghost Controls show up a lot on the acreage and solar setups too. Keeping local parts stock means your repair doesn’t wait on a two-day shipment from a warehouse in another state.
Common Electric Gate Repair Problems We See in Fulshear Homes
- Post heave in black-clay soil: Fort Bend’s expansive clay swells when wet and contracts when dry, and that cycle slowly pushes gate posts out of plumb. A post that’s even half an inch off makes the gate panel sag, which overloads the opener and causes stall-outs mid-travel. We reset post footings and re-level hinge geometry before reinstalling or replacing the operator.
- Control board corrosion from Gulf humidity: Even gates that never flooded deal with the constant moisture this close to the Brazos. Circuit boards oxidize, solder joints crack, and the board stops reading the remote or the safety sensors. We inspect the board for corrosion first, because replacing it without addressing the enclosure seal just means another failure in two years.
- Solar panel underperformance: On acreage driveways with solar openers, shade from mature live oaks and cloud cover during wet seasons slowly drains the battery bank. The opener works fine during midday but dies at night or after a stretch of rain. We test the panel output and battery health before condemning the motor or the board.
- Safety sensor misalignment: Photo eyes and edge sensors get knocked out of alignment by heat, mowing crews, or kids playing near the gate track. When the gate refuses to close or reverses for no clear reason, the safety circuit is usually the first place we look. It’s often a five-minute adjustment, not a part replacement.
Pricing for Electric Gate Repair in Fulshear, TX
Here are straight numbers for Fulshear’s market. Gate motor replacement runs $185 to $420 depending on brand and swing versus slide. Control boards run $350 to $740. Keypad or remote replacement typically lands between $95 and $210. Safety sensor repair sits in the $110 to $260 range. Solar battery bank replacement runs $140 to $380 depending on capacity. Every one of those numbers is quoted in writing before work starts, and the price you approve is the price you pay, not a penny more.
What moves the number is mostly the brand and the access. A DoorKing slide operator on a flat pad is straightforward. A Viking swing operator on a post that’s heaved four degrees takes longer because the post work comes first. We’ll walk you through it, and estimates are free. Call (626) 649-4572 and we’ll give you an honest range before we even schedule.
We Also Serve Cities Near Fulshear
Our Electric Gate Repair crews cover the Fulshear area plus Richmond, Katy, Rosenberg, and Sugar Land. If you’re just outside Fulshear proper, give us a call and we’ll let you know when we can roll a truck your way. Electric Gate Repair in Fulshear is our core service area, but the surrounding Fort Bend towns see the same clay soil and the same opener failures, so we stay stocked and ready across the area.
Serving Fulshear, TX - Our Local Coverage Area
We’re based in the Fulshear area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fulshear
The hinge post is the first thing to move when Fort Bend black clay swells and contracts, because the post sits in the soil while the panel hangs above it. A shifting post throws off the gate’s swing arc, and then the operator stalls or the hinges bind. We fix the post footing first, then re-hang and re-level the gate, then verify the operator and safety edges. Call (626) 649-4572 and we’ll check your post before it damages the opener.
If your operator went in during late 2017 or 2018, it’s at the seven-to-eight-year mark where brushed DC motors and control boards commonly fail, especially with Fulshear’s humidity. It’s worth a service visit to inspect the board for corrosion, test the motor brushes, and check the battery if it’s solar. A service call is cheaper than a full replacement, and we’ll give you the written price before any work begins.
Yes, solar gate openers work well on long Fulshear driveways, and most acreage entrances near the Brazos run them for exactly that reason. The key is a properly sized panel, a healthy battery bank, and clean sealed terminals. We install and service solar operators for Viking, Linear, and Ghost Controls setups, and we test the whole charging circuit when we’re out. Call us and we’ll size it properly for your gate’s cycle count.
An automatic gate in Fulshear needs safety photo eyes or an edge sensor that detects obstructions and reverses the gate, plus a loop detector or equivalent for exit and entry where applicable. UL 325 is the standard we follow on every install and repair. If your gate is closing on a car or a kid, that’s an urgent fix, and our Electric Gate Repair team will treat it as one. Call (626) 649-4572 and we’ll prioritize it.
Yes, we service commercial and community entrance gates across Fulshear’s master-planned developments, including Cross Creek Ranch, Polo Ranch, and Fulshear Lakes. That means slide operators, loop detectors, keypad systems, and the heavy-duty arms that cycle hundreds of times a day. We stock DoorKing and Linear commercial parts locally, and we’ll come out fast when a community gate is down because we know a backed-up line at the entrance becomes a problem for everyone quickly.
If your electric gate is acting up in Fulshear, call (626) 649-4572 for a free estimate. A live person answers, we’ll give you a straight price in writing, and the technician who shows up will leave your property cleaner than they found it. That’s the Cedarwell C.A.R.E. promise, and it’s how we work every single job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fulshear since the company’s founding in 2009.