Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Farmers Branch
Electric gate repair in Farmers Branch usually means one of two jobs: a residential swing gate that’s dragged on Blackland Prairie clay for 50 years and finally quit latching, or a commercial slide gate somewhere in the Valwood corridor that’s logged thousands of cycles this month and burned out a sprocket. We handle both. A typical repair runs $180-$340 for residential work and $350-$900 for commercial operator repairs, and you’ll see the exact number in writing before we touch anything. Call (626) 649-4572 and a live person answers, day or night.
Farmers Branch is a small city with an outsized gate workload. We know the rhythm of it: ranch homes off Valley View Lane with tilt-gate posts, warehouses along Senlac Drive that never stop moving trucks, and homeowners just trying to get the car out before school drop-off. Our Electric Gate Repair team works these streets every week.
Key takeaways:
- Residential gate repairs in Farmers Branch typically run $180-$340; commercial slide-gate operator work runs $350-$900.
- Same-day and emergency service is available for gate failures that block a driveway or a loading dock.
- Every job includes a written price before work starts, shoe covers, drop cloths, and a cleanup photo.
- Factory-trained on FAAC, BFT, Linear, Viking, and the other brands families and fleets actually run here.
- The 365-Day Done Right Promise covers every repair and installation; that’s the whole story.
Why Latch & Post Gate Repair Is Farmers Branch’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family of independently owned gate specialists, operating since 2009. Farmers Branch homeowners and facility managers call us because we show up on time, we write the price down before we begin, and we leave the driveway cleaner than we found it. That’s the Cedarwell C.A.R.E. routine, and it applies on every single visit: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, Explain the price before the work. No exceptions, no upsell.
Our technicians are background-checked, uniformed, and factory-trained on the equipment this city actually runs: FAAC, BFT, Linear, and Viking, plus LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. Families in Farmers Branch often have a dog behind the very gate we’re fixing, or a kid’s bedroom window overlooking the driveway. So we run quiet tools when we can, and we schedule around nap time if quiet matters to you. We also lay drop cloths any time we step inside, and we text you a photo of the clean-up before we leave.
Cody Beckman leads the team. And when you call, a real person answers around the clock, not a phone tree. If the gate is keeping a truck from leaving a Valwood loading dock at 6 a.m., a live answer matters more than a callback.
Automatic Gate Repair in Farmers Branch
Automatic Gate Repair in Farmers Branch usually starts with a straightforward diagnosis: the operator runs, but the gate doesn’t move right, or the gate moves but won’t stop where it should, or the keypad stopped talking to the board. On residential properties across Farmers Branch, from the established streets around Farmers Branch Park to the ranch homes near Valwood Parkway, most automatic gate repairs fall between $180 and $340. That covers work like re-meshing a rack and pinion, replacing a worn sprocket, aligning a strike, or re-programming a limit switch.
When we repair an automatic gate, we’re thinking about the whole system: the motor, the travel points, the safety loops, the keypad or receiver, and the post the gate swings on. One weak point throws the rest off. That’s why the fixed price you see in writing is for the whole repair, not just the part that failed first.
Limit switches and travel points
If a Farmers Branch gate stops halfway or over-travels every few days, the limit switch is usually the culprit. On older residential operators the switch is mechanical and worn; on newer BFT or FAAC boards it’s a magnetic sensor that’s picked up interference. We test the full travel cycle before we leave, not just the first open.
Operator re-programming and board work
Control boards fail in patterns you can read once you’ve seen enough of them. A gate that opens fine but won’t close, or closes but won’t open, often points to a logic fault on a Viking or Linear board rather than a dead motor. We run the diagnostics, explain what we found, and show you the price in writing before we order or install anything.
Electric Gate Motor in Farmers Branch
Electric Gate Motor replacement in Farmers Branch is what we do when a motor has seized, stripped its internal gears, or cooked its windings from a North Texas summer. A gate motor repair, depending on the brand and the drive type, runs roughly $250-$600 in Farmers Branch. Full motor replacement on a commercial slide operator for a Valwood fleet yard can push higher, usually $500-$900. You’ll have the exact number in writing first.
The two motor types we see most in Farmers Branch: residential swing-arm and ram motors on 50-year-old ranch gates, and chain-drive slide motors on the high-cycle commercial gates along the I-35E corridor. They fail for different reasons. The residential motors wear from weather exposure and post movement. The commercial motors burn sprockets and limit switches from sheer cycle count, vibration, and heat.
Residential swing-arm and ram motors
Post heaving is the quiet killer of residential gate motors in Farmers Branch. The motor mounts to the gate and the post; when the clay soil tilts the post, the motor binds and pulls extra current until it fails. We always check post plumb before we bolt up a new motor, so we don’t hang a fresh motor on a leaning post and call it fixed.
Commercial slide-gate motors in the Valwood corridor
In the Valwood Industrial Park we rebuilt a GateKing-controlled fleet-yard slide gate on a DoorKing card-access loop after truck vibration had chewed a chain-drive operator’s sprocket and started throwing limit switches. We reset the rack and pinion mesh, replaced the worn sprocket, confirmed the safety photocell pair and loop detector, and signed the account to a quarterly preventive-maintenance schedule rather than another one-off call. That is the right repair pattern for a gate logging thousands of cycles a month.
Trusted Brands We Service in Farmers Branch
We carry or can quickly source parts for the brands Farmers Branch homes and businesses actually run. FAAC and BFT operators are common on the commercial slide gates and high-end residential swing gates near the Dallas North Tollway edge of town. Linear and Viking boards show up constantly in the older ranch neighborhoods and on small warehouse bay gates. Because we’re factory-trained on these exact systems, we usually bring the right part on the first visit instead of making the gate wait for a second trip. If a gate has to keep operating through the repair, we plan around your access schedule.
Common Electric Gate Repair Problems We See in Farmers Branch Homes
- Post heaving from Blackland Prairie clay. Spring rain swells the soil and summer drought shrinks it; over decades, that cycle tilts concrete post footings. The gate binds, drags, or stops latching at the strike, and any motor bolted to that post gets pulled out of alignment with it.
- Gate drag and bottom-rail warp from summer heat. Surface temperatures above 140°F cook the grease out of automated operators and warp bottom rails on slide gates, so gates that moved fine in April stall and drag mid-August.
- Burnt sprockets and dead limit switches on commercial slide gates. Fleet-yard and loading-dock gates in Valwood log thousands of cycles a month under heavy truck vibration, so chain-drive components fail on a completely different schedule than residential parts. A gate that intermittently stops at the wrong travel point is usually telling you the limit switch is done.
- Keypad and receiver failures at the gate entry. North Texas storms and direct sun exposure take a toll on the keypad membrane and the antenna connection inside the receiver box. The gate still works from the inside but stops answering the code from the car; that’s usually the keypad, not the motor.
Pricing for Electric Gate Repair in Farmers Branch, TX
Here is what you can expect to pay in Farmers Branch, as of 2026:
- Standard residential gate repair (latch, hinge, limit switch, keypad): $180-$340
- Residential gate motor repair or replacement: $250-$600
- Commercial slide-gate operator repair (Valwood-style, high-cycle): $350-$900
- Quarterly preventive maintenance contract for commercial slide gates: typically $300-$600 per visit depending on gate count and cycle duty
What moves the price: brand of operator, whether we’re rebuilding or replacing a drive component, and whether the gate has to stay usable during the work. We write the price down, show it to you, and only start once you say go. The estimate is free. Call (626) 649-4572 for an exact quote on your gate.
We Also Serve Cities Near Farmers Branch
Our service map covers Farmers Branch and the surrounding metro, including Dallas, Fort Worth, and as far out as Houston and San Antonio for larger commercial gate projects. Each city we serve is handled by a local team that works to the same Cedarwell Care Promise, with dispatch and scheduling coordinated from the brand’s Dallas-Fort Worth office.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Farmers Branch
That’s almost always a limit switch or travel-point problem, and in Farmers Branch the underlying cause is often post movement or heat-warped bottom rails rather than a bad motor. We test the full open-close cycle, confirm the switch, check the post plumb, and give you a written price for the fix, usually $180-$340. Call (626) 649-4572 and we’ll come look at it.
In Farmers Branch it’s usually a post problem. The Blackland Prairie clay swells with spring rain and shrinks in summer drought, which tilts concrete post footings over the years and pulls the gate out of alignment. We’ll check post plumb with a level before we adjust anything; if the post has moved, re-hanging the gate on the same post just delays the next failure. We’ll show you what we find and the written price before any repair starts.
Yes. Automated gates in Farmers Branch are required to have functioning entrapment protection, usually photocell sensors or contact edges, and the UL 325 standard applies to any gate operator installed or repaired in the city. If your gate’s photocells or safety edges are bad, that’s a repair we’ll handle as part of the same visit. A gate that reverses on a kid or a dog is not a working gate.
Usually yes. For residential repairs we can often get the gate back to manual operation or brace it in a safe position so you’re not blocked in, and we’ll tell you exactly when we expect to finish before we begin. For the commercial slide gates in the Valwood corridor, we schedule around loading-dock hours and can leave the gate operating on a temporary travel limit while we finish the fix. Call (626) 649-4572 and tell us what access you need, and we’ll plan around it.
We’re factory-trained on FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the vast majority of residential swing-gate operators in Farmers Branch’s ranch neighborhoods and the commercial slide operators in the Valwood corridor. If your operator is outside that list, call us anyway; if we can’t fix it properly, we’ll tell you that plainly and point you to someone who can. Estimates are free either way.
Call for a Free Estimate on Electric Gate Repair in Farmers Branch
If your gate isn’t moving the way it should, call (626) 649-4572. A live person will answer, we’ll talk through what’s happening, and we’ll set a time to come look. The estimate is free, the price is in writing before we start, and the repair itself is backed by the 365-Day Done Right Promise. If it’s not right, Latch & Post makes it right. No argument, no fine print.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Farmers Branch.