Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Clearwater
Electric gate repair in Clearwater usually costs between $180 and $680 depending on what failed. A capacitor or limit switch runs on the lower end; a full motor swap or control board replacement lands higher. We know Clearwater’s gate problems because they repeat themselves every year here: salt corrosion, snowbird-season failures, and tight driveways where a swing gate simply will not fit. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Clearwater’s Preferred Electric Gate Repair Company
Every gate comes down to two parts: the latch that holds it and the post that carries it. That is the job we focus on, and it has been our only job since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Our technicians are background-checked, uniformed, and factory-trained on the brands Clearwater families actually have: LiftMaster, FAAC, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
What Clearwater homeowners tell us they value most is the documented care routine. Shoe covers and drop cloths go down before we step inside. We ask before moving anything near the gate or the panel. We run quiet tools when kids are asleep, and we can schedule around nap time if that matters to your household. Before we leave, we photograph the clean-up so you can see exactly what we did and did not touch. That is the Cedarwell C.A.R.E. standard, and it is included on every visit.
Every repair and installation is covered by the 365-Day Done Right Promise. If the work is not right, we make it right. No argument, no fine print. Cody Beckman leads our team, and he holds every Clearwater job to that standard.
Automatic Gate Repair in Clearwater
Automatic gate repair in Clearwater most often comes down to one of three failures we see repeatedly across the city: a control board corroded by marine air, limit switches that drifted after a storm cycle, or an operator that sat dormant all summer and seized. When we arrive, we diagnose the specific fault before quoting anything. You get a written price before any work begins, every single visit.
A standard automatic gate repair in Clearwater typically runs $220 to $480. If the operator needs full replacement rather than component repair, expect $600 to $1,100 depending on the model and whether we are reusing your existing arm or track. Every price is in writing before we touch a screw.
Control Board Diagnosis and Replacement
Clearwater’s humidity pushes corroded contacts and fried relays on control boards faster than inland Florida. A replacement board for a Linear or DoorKing operator usually runs $280 to $450 installed. We keep common boards stocked locally so most Clearwater repairs happen on the first visit.
Limit Switch and Safety Photocell Repair
Storm-season manual locking open or shut wears limit switches year after year. If your gate stops short, reverses for no reason, or will not close fully, the limit switch or photocells are the likely cause. Photocell replacement runs $95 to $180; limit switch adjustment or replacement runs $120 to $220.
Electric Gate Motor in Clearwater
Electric gate motor replacement in Clearwater is the single most common repair we quote in November, when snowbirds return and operators that sat idle through the May-to-October humidity fail on the first cycle. A residential slide or swing gate motor in Clearwater typically costs $600 to $1,100 installed, including the motor, mounting hardware, and full travel re-adjustment. The written price is always delivered before work starts.
Because no Clearwater address is more than about five miles from tidal water, marine chloride reaches even inland neighborhoods like Countryside. That means a motor installed with standard zinc-plated fasteners 18 months ago may already be seizing. We re-quote with marine-grade stainless fasteners and dielectric grease as the baseline, not an upsell. It is what stops a callback before the warranty expires.
Swing Gate Operator Replacement
Older Clearwater homes with ornamental wrought-iron gates often run dual swing operators that work as a pair. When one motor fails, the gate binds and the other motor strains. We replace both leaf operators as a matched set where needed, typically $900 to $1,400 for the pair, so the gate moves evenly again.
Slide Gate Motor and Track Repair
Tight Clearwater driveways with no room for a swing arc use slide gates instead. Salt and sand grit wear slide gate tracks and rollers fast. Replacing rollers and re-bedding the track runs $180 to $340; a complete slide gate motor replacement lands between $650 and $1,200 depending on gate weight and length.
Trusted Brands We Service in Clearwater
Our technicians are factory-trained on Linear, Viking, and Ghost Controls, plus DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We do not guess at wiring diagrams. For Clearwater customers we keep the most common control boards and limit switch kits stocked locally, which shortens the time between your call and a working gate. If your gate operator brand is not listed, call us anyway. We will tell you honestly whether we can service it before you commit to anything.
Common Electric Gate Repair Problems We See in Clearwater Homes
- Zinc-plated hardware seizing from salt air. Standard fasteners installed 18 months ago on a gate five miles from the water are already corroding. Marine chloride from Clearwater Harbor, Tampa Bay, and the Gulf reaches every gate in the city, not just the beachside ones.
- Snowbird-season operator failure. Gates in the 1960s to 80s active-adult communities off Countryside Boulevard sit idle through the humid summer and fail in November, usually at the control board or limit switches. We schedule proactively in October for residents who want to avoid the rush.
- Sagging ornamental gates with loose hinge posts. Mid-century wrought-iron and aluminum swing gates in Clearwater neighborhoods like Countryside and the eastern corridors are decades past their engineered lifespan. The panel is rarely the problem; the post behind it usually is.
- Post-storm drift on slide and swing gates. Manually locking gates open or shut before every named storm accelerates wear at pivot points, hinge posts, and limit switches. After a hurricane passes, gates rarely close the same way they did the month before.
Pricing for Electric Gate Repair in Clearwater, FL
Here is what Clearwater homeowners should expect to pay. Control board replacement runs $280 to $450. Limit switch or photocell work runs $95 to $220. A full motor replacement lands between $600 and $1,100 for most residential gates, with dual swing operator pairs reaching $1,400. What changes the number: gate weight, whether we are matching a specific brand like Viking or Ghost Controls, and whether the existing mounting hardware can be salvaged or must be replaced with marine-grade stainless. The written price is always delivered before any work begins. Call (626) 649-4572 for a free estimate on your specific gate.
We Also Serve Cities Near Clearwater
Our Electric Gate Repair team covers Clearwater and the surrounding Pinellas communities: Largo, Safety Harbor, Dunedin, and Pinellas Park. If your gate sits in one of those cities, Electric Gate Repair in Clearwater scheduling and service works exactly the same way: written price first, C.A.R.E. routine on site, and the 365-Day Done Right Promise on every job.
Serving Clearwater, FL - Our Local Coverage Area
We’re based in the Clearwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Clearwater
Because Clearwater’s May-to-October humidity sits above 85% and the gates in snowbird communities sit unused through those months, corrosion builds on control board contacts and limit switches that never get exercised. The first cycle when residents return in November is when the failure shows. We see it every year. Scheduling a preventive check in October can catch the corrosion before it strands you. Call (626) 649-4572 to book one.
Yes, and this is the part most people miss. No Clearwater address is more than about five miles from tidal water, and onshore Gulf breezes carry chloride particles miles inland. That means even in Countryside, standard zinc-plated fasteners seize within 18 to 24 months. Marine-grade stainless and dielectric grease are the baseline minimum here, not an extra. We spec them on every Clearwater repair as standard.
Usually the post. Clearwater’s mid-century concrete-block homes often have original ornamental gate posts that have shifted or corroded where the hinge bolts seat. The panel itself may still be straight. We correct the sag at the post, reset the hinges with marine-grade stainless, and re-adjust the operator travel so the gate closes cleanly again. Written price before any work starts.
Yes. Many Clearwater homes, especially older subdivisions and shared driveways off Countryside Boulevard, do not have the arc space for a swing gate. We repair and replace slide gate motors, rollers, and track, and we can convert a failing swing gate to a slide configuration where the driveway layout allows it. A slide gate motor replacement for a residential gate runs $650 to $1,200 installed.
We work one leaf or one side at a time so the other stays usable for your neighbors. In a recent active-adult community off Countryside Boulevard, we rebuilt a binding ornamental swing gate on a shared driveway by correcting the sag at the post, resetting the LiftMaster dual swing operator, and swapping every fastener to marine-grade stainless with dielectric grease. The residents’ side stayed open throughout. Call (626) 649-4572 to schedule your shared-driveway repair.
Nothing beyond the quoted repair price, which you will see in writing before any work begins. Standard component repairs like limit switches and photocells run $95 to $220. Control boards run $280 to $450. Full motor replacements run $600 to $1,100. There is no fee for the estimate and no pressure to accept the quote. Call (626) 649-4572 for an exact number on your gate.
Call Latch & Post Gate Repair in Clearwater
When your electric gate stops working in Clearwater, call (626) 649-4572. A live person answers around the clock, not a voicemail queue. We will schedule a visit, deliver a written price before any work starts, and leave your property the way we found it: floors covered, gate working, clean-up photographed. Cody Beckman and the Latch & Post team serve Clearwater homeowners with the Cedarwell C.A.R.E. standard and the 365-Day Done Right Promise on every job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Clearwater since 2009.