Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clearwater, FL
Latch & Post Gate Repair is the Clearwater gate company focused on one thing: gates that open, close, and latch the way they should. Clearwater’s combination of salt air, summer humidity, and mid-century housing stock makes gate work here different from anywhere inland, and we build every repair and installation around those conditions. If your gate is sagging, seizing, or no longer responding, call us at (626) 649-4572 for a written price before any work starts.
Why Clearwater Homes Are Different
Clearwater sits between Clearwater Harbor, Tampa Bay, and the Gulf of Mexico, so virtually every gate in the city lives in salt-laden air. Standard zinc-plated hinges and carbon-steel hardware that would last a decade in Orlando start pitting and seizing here within one to two seasons. In neighborhoods like Countryside, which is roughly five miles from tidal water, we regularly find gate hardware a competitor installed 18 months earlier already rusted solid. Marine-grade stainless fasteners and dielectric grease are not an upsell in Clearwater; they are the baseline for any gate that needs to survive past its warranty.
The housing stock adds another layer. Clearwater has a dense belt of 1960s through 1980s condominium complexes and active-adult communities, many still running their original ornamental wrought-iron or aluminum swing gates. Those gates are now well past their engineered lifespan, which means the work we do here leans heavily toward structural repair and operator replacement rather than simple latch swaps. Clearwater also has far more HOA-governed gated entries per capita than nearby inland Pinellas cities, and those boards usually want the work done to a standard, not just done.
Summer is the hardest season on gate hardware. Clearwater averages over 60 inches of rain a year with humidity above 85%, and the June through November hurricane cycle forces gates to be manually locked open or shut before each named storm, then re-adjusted after. That repeated stress cycle wears down pivot points and limit switches year after year, which is why so many Clearwater gate failures surface in November when seasonal residents return and find their automatic gate has corroded through months of idle heat and moisture.
Our Main Clearwater Services
Clearwater homeowners call us most often for two reasons: a gate that will not open or close, and an automatic operator that has failed. Each of these services has its own detailed Clearwater page linked below.
Gate Repair in Clearwater
A sagging gate, a stuck latch, or a hinge that groans every time the wind moves it is a job we handle the same day we hear about it in most cases. We rebuild pivot points, straighten or re-hang the gate leaf, and replace the exact latch hardware for your post and gate material. In Clearwater, the first thing we check on any repair is the salt exposure on every fastener and hinge, because hardware that looks fine on the surface is often corroding from the inside. See the full breakdown on our Gate Repair in Clearwater page.
Gate Installation in Clearwater
New gate installations in Clearwater start with the post, because a gate is only as plumb and true as the post carrying it. We set posts in concrete, hang the gate with marine-grade hardware, and match the material and style to the home. For Clearwater’s mid-century concrete-block houses and condominium entrances, that often means aluminum or powder-coated steel rather than raw iron, which will not survive the chloride air. Every installation comes with a written price, shoe covers and drop cloths inside the home, and a cleanup photo before we leave. Read more on our Gate Installation in Clearwater page.
Electric Gate Repair in Clearwater
Electric gate operators in Clearwater fail for predictable reasons: salt corrosion on the control board contacts, seized motor housings, and limit switches that have drifted out of adjustment. We service the openers families in Clearwater actually own, including Viking, Ghost Controls, DoorKing, and Elite, and we carry common parts locally so a first-visit fix is the norm rather than the exception. We also check the safety edges and photo eyes on every automatic gate, because a faulty safety edge is an injury waiting to happen. Details are on our Electric Gate Repair in Clearwater page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clearwater
We carry parts for the operators Clearwater homeowners and HOAs use most: Viking, Ghost Controls, DoorKing, and Elite. Our technicians are factory-trained on each of them, which means we diagnose the right fix the first visit instead of guessing. You can see the full list on our brands page.
Pricing for Gate Company in Clearwater, FL
| Service | Typical range in Clearwater |
|---|---|
| Gate latch replacement | $140 – $260 |
| Gate hinge replacement (pair) | $180 – $320 |
| Gate sag repair and re-hang | $260 – $480 |
| Post reinforcement or reset | $340 – $620 |
| Weld repair (small section) | $120 – $240 |
| Electric gate operator replacement | $680 – $1,400 |
| Control board replacement | $320 – $580 |
| Safety edge or photo eye replacement | $160 – $300 |
| Full gate installation (single swing) | $1,800 – $4,200 |
| Full gate installation (double swing) | $3,600 – $8,500 |
What pushes a Clearwater job toward the higher end of these ranges is usually salt damage that has spread beyond the visible part: a seized hinge that has wallowed out the post, or an operator board with corroded terminals that also needs a new harness. We quote the exact price in writing before any work begins, and that number does not change unless you approve a change in writing first.
Neighborhoods We Serve in Clearwater
We work throughout Clearwater, from the beachside condominium corridors along Gulf Boulevard to the inland subdivisions of Countryside and the eastern corridors. Most Clearwater addresses are within a short drive of our local crew, and we schedule repairs the same day in most cases.
- Countryside
- Island Estates
- Harbor Oaks
- Skycrest
- Coachman Ridge
Service Area – Cities Near Clearwater
We also serve the communities immediately around Clearwater. If you are in Largo, FL, Safety Harbor, FL, Dunedin, FL, or Pinellas Park, FL, the same Clearwater crew covers your address with the same written-price promise and cleanup routine.
Serving Clearwater, FL - Our Local Coverage Area
We’re based in the Clearwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clearwater
In most Clearwater neighborhoods, we can have a technician at your door the same day you call for a gate repair. For installations and electric gate operator replacements, we schedule a free measure and written quote within a few business days, then order parts and set an installation date. Call (626) 649-4572 and a live person will answer.
Most Clearwater condominium associations and gated communities require board approval before any gate or operator changes, especially on shared entry gates. We can provide a written scope and materials list for your HOA or property manager, and we are comfortable working with boards that want marine-grade hardware specified. We never start a shared-entry job without the paperwork in place.
Our Clearwater crew covers the city itself plus Largo, Safety Harbor, Dunedin, and Pinellas Park. If you are on the beach side or inland near Countryside, the same team handles your gate. If you are not sure, call (626) 649-4572 and we will confirm coverage and get you on the schedule.
Contact Latch & Post Gate Repair in Clearwater
For a free estimate on any gate repair, gate installation, or electric gate repair in Clearwater, call (626) 649-4572. A live person answers around the clock, and you will get a written price before any work begins. Cody Beckman leads our Clearwater team, and every job carries the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clearwater Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco