Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Celina
An electric gate in Celina that won’t open or close is more than an inconvenience - it’s a security problem and a scheduling disaster. Most electric gate repairs in Celina run between $185 and $520 depending on whether you need a sensor realigned, a control board swapped, or a motor replaced. We answer calls around the clock and typically reach Celina neighborhoods like Light Farms, Mustang Lakes, and Lilyana the same day you call. Call (626) 649-4572 for a written price before we touch anything.
Our crews know Celina’s gates better than any out-of-town company can. The homes here are almost all new construction, which means the gate problems we see are different from what a technician finds in older cities. Builder-grade operators on heavy ornamental iron, posts shifting on black clay, and missing conduit runs are the real culprits behind most Celina gate failures - and we fix them with parts sized for the job, not the builder’s budget.
Why Latch & Post Gate Repair Is Celina’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family, independently owned and operated since 2009. Our technicians are background-checked, uniformed, and factory-trained on the gate brands families in Celina actually have installed - Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule.
When we walk onto your property in Celina, the way we work matters as much as the repair itself. We lay drop cloths on your floor and put on shoe covers before stepping inside. We follow the Cedarwell C.A.R.E. values on every job: clean up like it’s our own home, ask before moving anything, respect your family’s quiet hours, and explain the price before the work. And we send you a photo of the cleanup before we leave - your floors, your hallway, your peace of mind all intact.
Every repair we do in Celina is covered by the 365-Day Done Right Promise. If the fix isn’t right, we make it right. No argument, no fine print. That’s the standard we’ve held since 2009, and it’s why Celina homeowners keep our number saved.
Commercial Gate Operator in Celina
A Commercial Gate Operator in Celina usually means the motor and control system that runs a community entry gate, a private driveway gate on an acreage property, or an HOA pool or amenity gate - and these jobs are different from regular residential calls. They fail differently, they cost more to fix correctly, and they often involve HOA architectural-control approval before visible hardware changes. We’ve handled these operators across Celina’s master-planned communities, including Cambridge Crossing and Mustang Lakes, where the original builder installations are now entering their first major service cycle. A commercial-grade operator repair in Celina typically runs $420 to $1,100, and full operators with proper UL 325 entrapment protection generally start around $1,600 installed.
HOA Entry Gate Systems
The community gates at Celina’s subdivisions run heavy slide or swing panels and see vehicle traffic hundreds of times a day. We routinely find builder-installed control boards paired with the wrong loop detector sensitivity, so the gate starts closing too soon on a car that’s still passing through. We re-tune the detectors, verify safety photocell alignment, and re-set the closing force to meet UL 325 standards.
Private Acreage and Equestrian Gates
Some Celina properties east of Preston Road sit on larger lots with custom steel gates that weigh far more than a standard driveway panel. These need a commercial-class operator with enough gear strength to move the load without straining. We size the operator to the actual gate weight and the wind load it faces across open North Texas pasture, then run the power and conduit correctly the first time.
Gate Opener Repair in Celina
A Gate Opener Repair in Celina usually means the swing or slide operator at a single-family driveway has stopped responding, stripped a gear, or is pulling the gate out of alignment because it was undersized from day one. We see this constantly in Celina’s newer HOA subdivisions. A standard opener repair in Celina runs between $240 and $480 when we can replace a gear, limit switch, or capacitor. A full operator swap on a heavy ornamental iron gate runs $680 to $1,250 installed.
Builder-Grade Operators on Heavy Iron Panels
One of the most common calls we take in Celina is a LiftMaster or Linear opener that failed after only three or four years. The builder spec’d a residential swing-arm operator rated for a light steel tube gate, then hung a heavy wrought-iron panel on it. The arm shears, the gear strips, or the board burns out. We swap in a freeze-rated operator matched to the actual gate weight, not the builder’s line item.
Operators Fighting Misaligned Posts
When a gate post shifts out of plumb on Celina’s Houston Black clay, the operator has to work harder every single cycle until something breaks. We don’t just replace the motor and walk away. We check the post for movement, correct the footing where the soil has heaved, and re-set the gate so the new operator runs clean. Otherwise you’re paying for the same repair twice.
Trusted Brands We Service in Celina
Our technicians are factory-trained on Linear, Viking, Ghost Controls, and DoorKing operators - the brands we see most often on Celina driveways and community entries - along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We stock common replacement boards, arms, and remotes for these systems so a Celina repair doesn’t wait on a parts shipment from California or overseas. If your operator is one of these brands, we can usually diagnose it on the first visit and have it running the same day.
Common Electric Gate Repair Problems We See in Celina Homes
- Sheared swing-arm operators on heavy ornamental iron. Builders in Celina’s HOA communities frequently installed operators rated for aluminum tube gates, not the heavy steel panels the architecture calls for. The arm gives out first, then the gear or board follows. We see this in Lilyana and Cambridge Crossing constantly.
- Gates out of plumb from Houston Black clay movement. Celina sits directly on expansive clay that shrinks in summer drought and heaves after rain. New gate posts shift within the first year, the panel sags, and the operator fights the load until a limit switch or motor burns out.
- Missing safety photocells or loop detectors on retrofitted manual gates. When a Celina homeowner adds automation to a gate the builder installed manually, the power and conduit often weren’t run. That leaves no loop detector at the driveway approach and no safety photocell at the gate path - both required for UL 325 entrapment protection.
- Ice storm damage to freeze-sensitive operators. Celina gets enough freezing precipitation each winter to seize operator arms and crack plastic gear housings. Systems not rated for freeze conditions fail suddenly on the first cold morning. We install freeze-rated components on every outdoor operator we repair or replace.
Pricing for Electric Gate Repair in Celina, TX
Here’s what Celina homeowners typically pay for common Electric Gate Repair work: a basic sensor realignment or limit switch replacement runs $185 to $260. A swing-arm replacement on a standard driveway gate runs $280 to $520. A control board replacement runs $350 to $680 depending on the brand. A full operator swap on a heavy ornamental iron gate runs $680 to $1,250, and commercial or community gate systems start at $420 and can reach $1,600 or more for a complete operator with proper safety devices. Before we start any work, you get the exact number in writing. That written price is part of the Cedarwell Care Promise - never an upcharge, never a surprise invoice after the job.
We Also Serve Cities Near Celina
Our Electric Gate Repair team serves Celina and the surrounding North Texas communities. We take calls in Prosper, Frisco, Melissa, and McKinney, and we’re familiar with the gate inventory and soil conditions in each. If you’re just outside Celina’s city limits, call us - we’ll let you know if we can reach you and when.
Serving Celina, TX - Our Local Coverage Area
We’re based in the Celina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Celina
Most Celina gates were installed during a rapid build-out between 2015 and now, and the builder-level operators spec’d for those houses were sized for lighter panels than the ornamental iron actually installed. The black clay also shifts posts and puts the operator under constant strain. So a gate that fails at year three or four is usually fighting a post that’s out of plumb or an operator that was too small from the start. We diagnose the actual cause and fix it so the next repair isn’t two years away. Call (626) 649-4572 and we’ll walk you through what’s happening.
Yes. We automate existing manual gates all over Celina. The catch is that most Celina builders never ran the conduit or power from the house to the gate, so the job usually includes a trench for the electrical run, a loop detector at the driveway approach, a safety photocell at the gate path, and often a keypad or intercom. As a full Gate Installation - Celina job, automation on an existing gate typically runs $1,800 to $3,400 depending on gate weight, operator type, and access control. We’ll give you a written breakdown before any work begins.
Sometimes. Celina’s master-planned communities - Light Farms, Mustang Lakes, Lilyana, Cambridge Crossing and others - often have architectural-control criteria that require written approval before a visible hardware change like a new operator arm, a different keypad, or a full gate replacement. A straight repair that keeps the original appearance usually doesn’t need approval. Before we order parts or cut anything, we’ll ask about your HOA’s process so a same-day motor swap doesn’t turn into a two-week approval delay.
Yes. The photo-eyes - formally, safety photocells - are the entrapment protection devices that stop a closing gate if a child, pet, or vehicle is in the path. They’re required by UL 325 and by the gate operator manufacturer’s installation instructions. If they’re disconnected or misaligned, the gate becomes a safety hazard and a liability for your HOA if it’s a community gate. We replace, realign, and test every photocell pair on every repair. Call (626) 649-4572 for a free estimate on getting yours working.
We repair Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule operators - the brands installed across Celina’s HOA communities and on private driveways. Our technicians are factory-trained, and we stock common replacement boards, arms, gears, and remotes locally so the fix doesn’t stall waiting on a part.
Written by Cody Beckman, Owner at Latch & Post Gate Repair. Serving Celina homeowners with straight answers and written prices since 2009.