Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Cedar Park
Electric gate repair in Cedar Park typically runs between $180 and $650 depending on whether the operator, the post footing, or the control board has failed. Most jobs are diagnosed on the first visit and repaired same day when parts are on the truck. We serve the full Cedar Park area from Avery Ranch to Forest Oaks, and we answer the phone around the clock at (626) 649-4572.
Cedar Park’s automated gates are not like those in older Texas towns. The city’s master-planned communities were built in concentrated waves, which means entire streets of gates were installed within the same two or three year window and are now degrading together. Our Electric Gate Repair team knows what that looks like: builder-grade operators with no service history, post footings set in clay that heaves every summer, and circuit boards that never got a full repair after Winter Storm Uri. You will get a written price before we touch anything, and the tech will treat your driveway, your floors, and your time like they matter.
Why Latch & Post Gate Repair Is Cedar Park’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and we have been doing Gate Installation - Cedar Park and repair work since 2009. Families in Cedar Park call us because our technicians arrive in uniform, wear shoe covers if they need to step inside, and lay drop cloths before any work near the house. That is part of the Cedarwell C.A.R.E. routine: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. It is a routine most gate companies never mention, but it is non-negotiable on every single visit we make.
We focus exclusively on gates: Electric Gate Repair, gate installation, and repair. Not fences, not handyman lists. In Cedar Park that focus matters, because the housing stock here has a very specific profile: brick-and-stone HOA subdivisions built between roughly 1998 and 2018, with a high concentration of automated driveway gates and ornamental iron styles in the higher-price-point sections. Our techs are factory-trained on the brands Cedar Park families actually own, and they arrive with the parts stocked for those systems.
Every repair and installation is covered by the 365-Day Done Right Promise. If it is not done right, we make it right. No argument, no fine print. And when you call, a live person answers, 24/7. No voicemail, no callback queue.
Electric Gate Motor in Cedar Park
An electric gate motor in Cedar Park is one of the most common repair calls we handle, especially in subdivisions built between 1998 and 2018 where builder-grade motors are now running 15 to 20 years past their install date with no service history. The motor is the muscle of the system: it drives the swing or slide motion, and when it fails, the gate either stalls mid-cycle or refuses to move at all. A typical gate motor replacement in Cedar Park runs $220 to $520 depending on the make and whether it is a swing or slide configuration. You will see the exact number in writing before any work begins.
Builder-Grade Durability Issues
Many Cedar Park gates came with entry-level operators from the original developer. Those motors were never meant to run 20 years. By now, the capacitor is usually degraded, the limit switches are worn, and the internal gear is slipping. We replace the whole motor when the failure is internal, because a rebuilt motor at this age is a short-term patch, not a repair. Our techs stock Viking, Ghost Controls, and DoorKing replacement motors for the systems we see most often in this part of Texas.
Clay Heave and Motor Alignment
Eastern Cedar Park sits on Blackland Prairie clay. That clay shrinks during the summer drought-and-bake cycle, and the gate post moves with it. When the post tilts even a few degrees, the motor picks up the misalignment: the arm binds, the chain rides off the sprocket, and the motor eventually burns out trying to move a gate it can no longer pull straight. We check the post footing before we condemn the motor. In a lot of Cedar Park driveways, the motor is fine and the post is the actual problem.
Gate Access Control in Cedar Park
Gate access control in Cedar Park covers the devices that tell the gate to open: the keypad, the remote receiver, the safety sensors, and the control board that ties them together. A failed access control point can leave you outside your own driveway or worse, leave a community entrance gate stuck open overnight. Typical access control repairs in Cedar Park run $160 to $410, with control board replacement on the higher end. We diagnose the exact component before recommending any work, and the price is written down before we start.
HOA Community Entrance Systems
Several of Cedar Park’s HOA communities have commercial slide operators at the entrance controlled by a shared access system. When a keypad stops accepting codes or the gate refuses to respond to the board’s signal, the board often has no wiring schematic to hand a technician. We trace the system from the operator back through the control board and the power supply. It is slower work, but we would rather trace than guess. In Avery Ranch and Twin Creeks, many of those original control boards are now 15 to 20 years old, and the February 2021 freeze cracked more than a few of them. A board repair that got a quick workaround in 2021 is now presenting compounding failures, and we have been finding Uri damage layered under years of deferred maintenance on the same unit.
Post-Freeze Battery and Circuit Failure
The freeze event in February 2021 seized solar-charged batteries on driveway gates across Cedar Park, and cracked hydraulic actuators on community slide gates. Some of those systems got a temporary bypass rather than a full repair. That temporary fix is now failing. If your gate has been running slower each season, or the battery dies within a day of full sun, there is a good chance the original freeze damage was never fully addressed. We replace the actuator or battery properly, check the charge controller, and set the system back to reliable operation.
Trusted Brands We Service in Cedar Park
Our technicians are factory-trained on the gate operators Cedar Park homes and HOAs actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On this page we have been talking mostly about LiftMaster and Elite commercial slide operators, because those are the dominant units in Cedar Park’s community entrances, plus Viking and Ghost Controls on residential driveway gates. We stock local parts for Cedar Park customers, which means fewer return trips and a faster fix when a capacitor or limit switch fails. If you are not sure what brand your gate is, call us and describe the housing. A live person will answer and help you identify it.
Common Electric Gate Repair Problems We See in Cedar Park Homes
- Builder-grade swing operators running past their service life. Many gates in the 1998 to 2018 subdivision boom were installed with entry-level motors that are now 15 to 20 years old. A frozen circuit board or seized actuator is often layered on top of years of deferred maintenance.
- Post footings heaving on Blackland Prairie clay. Eastern Cedar Park’s expansive clay shrinks in the summer heat and swells after rain, tiling gate posts out of plumb until the latch binds and the hinges drag. The post is usually the real recurring failure, not the operator.
- Manual driveway gates automated after the build without dedicated power. Some Cedar Park homeowners added automation to a gate that was originally manual. Without a dedicated conduit run, the system relies on a solar operator and undersized low-voltage wiring, which fails in the same summer heat that cooked the original battery.
- Winter Storm Uri freeze damage that was never fully repaired. The February 2021 freeze cracked hydraulic actuators, seized solar-charged batteries, and damaged control boards throughout Cedar Park. Many systems received a quick workaround and are now showing compounding secondary failures.
Pricing for Electric Gate Repair in Cedar Park, TX
Here is what families in Cedar Park can expect to pay for common repairs: gate motor replacement runs $220 to $520; access control and keypad repairs run $160 to $410; safety sensor replacement runs $125 to $260; a full control board replacement typically lands between $280 and $520; and post footing reset work starts around $180 and goes up from there depending on how deep the concrete has to go and whether the clay side of the property is involved. A gate that is sagging but still running usually needs a post correction before it needs a new operator, and that is the more economical fix. Every quote we give is written down before any work begins. No pressure, no surprise invoice afterward. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Cedar Park
Our electric gate repair coverage extends beyond Cedar Park into the surrounding communities. We regularly serve Leander, Round Rock, Pflugerville, and Georgetown. If you are in one of those areas, call the same line at (626) 649-4572 and ask about Electric Gate Repair in Cedar Park scheduling, or we will route you to the right local specialist.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Cedar Park
In Avery Ranch and Twin Creeks, the community entrance gate operators installed by the original HOA developers in the early-to-mid 2000s are now 15 to 20 years old, and the answer is usually both. The operator’s actuator or board has often failed from age, but the post footing on the clay side has also moved. We have been called out to an entry slide gate that had been jerking and stalling for weeks, where the board had no maintenance file. We traced it from scratch and found a cracked hydraulic actuator and a seized solar-charged battery, Uri damage that a 2021 workaround had papered over. We replaced the actuator on the LiftMaster operator, corrected a rack and pinion that had drifted out of mesh, and set a new post footing where the fence line had heaved. Three overlapping failures, all in one visit. Call us for an exact diagnosis: (626) 649-4572.
The most common reason is that the automation was added without a dedicated power or conduit run, so the system relies on a solar operator and undersized low-voltage wiring. Cedar Park’s summer heat cooks the same battery that is already undersized for the motor. Most standard solar gate opener replacements run between $240 and $480 in Cedar Park, and the fix usually requires running proper power to the gate or upgrading the battery and charge controller. We will show you the written cost before any work starts.
Yes. The February 2021 freeze cracked hydraulic actuators, seized solar-charged batteries, and damaged circuit boards on automated openers across Cedar Park, and many systems received quick workarounds rather than full repairs. Those workarounds are now presenting compounding secondary failures, which is why we often find Uri damage layered underneath years of deferred maintenance on the very same unit. If your gate has never worked quite right since that winter, the original repair was probably incomplete. Call (626) 649-4572 and we will trace it properly.
We can. Most Cedar Park HOA boards do not have a maintenance file or wiring schematics for their original entrance gate operators, so we trace the system from the operator back through the control board and power supply. It takes longer than a plug-and-play swap, but it avoids guesswork. If the community entrance is in Cedar Park, we coordinate with property management for access, wiring diagrams if they exist, and gate codes. The price is written down before we begin.
Usually no. A sagging gate in Cedar Park is often a post footing problem, especially on the eastern side of the city where Blackland Prairie clay shrinks in the summer and swells after rain. When the post tilts, the gate drags and the opener works harder than it should, but the motor itself may still be fine. We correct the post footing first, then check the operator for strain damage. Post footing reset work starts around $180, which is a lot less than a new motor. Call (626) 649-4572 for a free estimate, and we will tell you what your specific gate actually needs.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Cedar Park since our founding as part of the Cedarwell family of gate specialists.