Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Cedar Park
A new driveway gate or entrance gate in Cedar Park typically runs $2,400 to $11,000 depending on the gate type, automation, and the ground we’re setting posts into. That’s the honest range, and you’ll see your exact number in writing before we touch anything. Latch & Post Gate Repair handles Gate Installation for homeowners across Cedar Park from Avery Ranch to Buttercup Creek, and we answer the phone live 24 hours a day. Call (626) 649-4572 and we’ll talk through your gate, your budget, and what the ground under your posts is actually doing.
We know Cedar Park’s housing stock well. Most of these brick-and-stone master-planned subdivisions went up between 1998 and 2018, which means thousands of gates and operators are now aging out on the same schedule. That’s the work we do every week. Cedar Park gate installation is different from work in older neighborhoods because the failures are predictable by subdivision and by soil type. We’ll explain how that works below.
Why Latch & Post Gate Repair Is Cedar Park’s Preferred Gate Installation Company
Latch & Post is part of the Cedarwell family of independently owned gate specialists in Cedar Park, and we’ve been doing this work since 2009. Our founder, Cody Beckman, built the company around a documented care routine that most gate companies never offer: a written price before work starts, shoe covers and drop cloths on every visit, and a cleanup photo before the technician leaves. In Cedar Park homes with kids and pets, that routine matters as much as the gate itself.
Cedar Park customers tell us the same thing, repeatedly: they’ve dealt with gate crews that left dirt on the porch, quoted one number and billed another, or never called back at all. We answer every call live, 24/7, with a real person. No voicemail queue. No “we’ll get back to you within 48 hours.” When your gate won’t open at 6:30 a.m. and you need to get to work, someone picks up.
On the technical side, our technicians are factory-trained on the brands families in Cedar Park actually own: LiftMaster, Viking, Ghost Controls, DoorKing, Elite, FAAC, BFT, Linear, and Mighty Mule. We carry common parts for those systems in our Austin-area service vehicles, so we’re not waiting a week on a distributor. Every job is backed by the 365-Day Done Right Promise: if the installation isn’t right, we make it right. No argument, no fine print.
Gate Fabrication in Cedar Park
Gate fabrication in Cedar Park is common because so many homes here sit on lots that don’t fit a stock gate size. If your driveway opening is wider than standard, or you want a custom ornamental iron design that matches the stonework on your house, we build the gate to spec rather than forcing a pre-made panel into an opening it doesn’t fit. A custom-fabricated single swing gate in Cedar Park typically runs $3,000 to $7,500 before automation, depending on steel gauge, design, and finish. Double swing gates and sliding gates run higher, usually $6,000 to $11,000.
Post-Set Depth and the Escarpment Split
The most important fabrication decision in Cedar Park is what’s happening underground, not above it. Western Cedar Park neighborhoods sit on caliche and fractured limestone, which holds posts firmly once they’re set but resists digging. Eastern neighborhoods sit on expansive Blackland Prairie clay that shrinks in drought and heaves after rain. If a gate is fabricated for an eastern Cedar Park lot, the posts need deeper footings and possibly concrete collars, otherwise the gate will drift out of plumb within a year or two.
Materials That Suit the Neighborhood
Most Cedar Park subdivisions are HOA-governed, and many have architectural guidelines that restrict gate materials and finishes. We’ll typically build with powder-coated steel or aluminum in a style that matches your brick and stone, and we’ll write the price down before anything gets fabricated. You’ll see the full number, including post concrete and hardware, before you say yes.
Automatic Gate Installation in Cedar Park
Automatic gate installation in Cedar Park usually involves one of two situations: a homeowner adding automation to a gate that was built manual, or replacing a builder-grade operator that’s reached the end of its life. Adding a paired operator to an existing swing gate typically runs $1,800 to $4,200. Replacing a failing slide gate operator on a community or HOA entrance runs higher, often $4,500 to $9,000 with new safety edges and controls. The most important variable is whether power and conduit are already at the hinge post. In many Cedar Park homes, they’re not.
Retrofits Where Conduit Never Went In
When a house was built with a manual gate, the builder almost never ran power out to the hinge post. That means a proper automation job requires trenching a new circuit, setting a new or reinforced footing, and mounting the operator on a post that can handle the torque. Skipping the dedicated circuit and trying to run a gate operator off a nearby outdoor outlet is a common shortcut, and it’s one of the main reasons we get called back to replace operators that burned out within a year. We’d rather pull the circuit once and have the system hold up for a decade.
Safety Photo-Eyes and Edge Sensors
Every automatic gate in Cedar Park needs safety photo-eyes and, on sliding gates, edge sensors. These are not optional add-ons. They stop the gate if a kid or a pet crosses the path while it’s moving. We install and calibrate them on every automation job, and we test them in front of you before we leave.
Trusted Brands We Service in Cedar Park
We’re factory-trained on the brands Cedar Park homeowners and HOAs actually have in the ground: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is a Viking from an Avery Ranch build-out, or a Ghost Controls box on a ranch-style gate in the western limestone area, we know the wiring and we stock the common parts. That matters because those builder-time operators are now 15 to 20 years old, and many communities are discovering they have no maintenance records and no wiring schematics for the original conduit runs. We trace, we identify, and we rebuild rather than guess.
Common Gate Installation Problems We See in Cedar Park Homes
- Builder-grade operators failing on schedule. In Avery Ranch and Twin Creeks, the original community entrance operators installed in the early-to-mid 2000s are reaching end-of-life nearly all at once. Many HOA boards have no records for these units, and we often find February 2021 freeze damage layered beneath years of deferred maintenance.
- Clay soil tilting posts east of the escarpment. Eastern Cedar Park sits on expansive Blackland Prairie clay. Through drought-and-bake summers, that clay shrinks, gate posts lean, latch hardware misaligns, and the gate starts dragging or binding. Re-setting posts without addressing the footing depth just means the same problem returns next year.
- Manual gates with no power run. Plenty of Cedar Park homes were built with a manual swing gate and no conduit to the post. Automating them properly means a new circuit, a proper footing, and an operator sized for the gate’s weight. Shortcutting any of these sets the job up to fail.
- Uri freeze damage that never got fully repaired. The February 2021 storm cracked hydraulic actuators, seized solar-charged batteries, and damaged operator circuit boards across Cedar Park. A lot of those systems got quick workarounds at the time, and we’re now seeing compounding secondary failures on the same units.
Pricing for Gate Installation in Cedar Park, TX
Here are real numbers for the Cedar Park market. A manual driveway swing gate with custom fabrication runs $3,000 to $7,500. Adding automation to an existing gate runs $1,800 to $4,200. A full automatic sliding gate installation, including track, operator, safety edges, and new posts, runs $6,000 to $11,000. Community entrance gate operator replacement runs $4,500 to $9,000 depending on gate weight and whether we’re replacing just the operator or the full control system. What moves the number: soil conditions and footing depth, gate width and weight, whether power is present at the post, and whether HOA approval is needed. You’ll get a written price before any work starts, and the number on that sheet is the number you pay. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Cedar Park
Our Cedar Park crews regularly handle Gate Installation jobs in Leander, Round Rock, Pflugerville, and Georgetown. If you’re just over the city line, dispatch and scheduling are coordinated from the Austin office and the same written-price, cleanup-photo routine applies. Call and we’ll confirm which crew covers your neighborhood.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Cedar Park
Yes, we can usually source parts for those builders era LiftMaster and Elite slide operators, and when parts are discontinued we can rebuild or retrofit the operator without replacing the whole gate. In Avery Ranch we recently pulled a 2004 LiftMaster commercial slide operator that had been limping along with a Uri-era workaround: freeze-cracked hydraulic actuator, seized battery, and no HOA maintenance records for the original wiring. We rebuilt the operator, replaced the actuator and control board, and corrected the gate and hinge post alignment that had drifted with the clay. Call (626) 649-4572 and we can assess your HOA’s equipment.
Yes, and this is one of the most common requests we get in Cedar Park. The builder almost never ran power or conduit to the hinge post, so the job involves pulling a new circuit, setting a proper footing, and mounting the operator correctly. In Twin Creeks we automated a builder-installed manual swing gate that had no power at all, so we pulled a new circuit to the hinge post and set a proper footing before mounting the operator and safety photocell. That’s the difference between an installation that holds up and one that fails in a year. Call us for a free site assessment.
If you live east of the Balcones Escarpment in neighborhoods like Forest Oaks, your gate posts are almost certainly set in expansive Blackland Prairie clay. During Cedar Park’s hot, dry summers that clay shrinks, the posts lean, and the gate drifts out of alignment. Re-setting the posts with deeper footings and proper drainage is the only fix that lasts. We see this every season, which means we can address it at the foundation level instead of just re-hanging the gate.
Yes, every automatic gate should have photo-eyes and edge sensors, especially in Cedar Park neighborhoods where kids and pets are playing near driveways. The sensors stop the gate if anything crosses the beam while it’s moving. We include them on every automation installation and calibrate them before we leave.
Yes, we coordinate directly with HOA property managers, and we’re used to working around access schedules, gate codes, and board approvals. Because so many Cedar Park communities were built in concentrated waves, a lot of HOAs are discovering they have no wiring schematics or maintenance records for their entrance systems. We can trace the wiring, document the system, and give the board a clear picture of what’s failing and what it costs to fix. Call (626) 649-4572 and we’ll start the conversation.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Cedar Park since 2009.