Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Brushy Creek
Electric gate repair in Brushy Creek usually comes down to two things: a motor that has quit responding or a post that has shifted in the clay. Most calls we run in Brushy Creek are resolved the same day, with the exact price in writing before any work begins. If your gate is stuck open, stuck closed, or cycling on its own, call (626) 649-4572. We know Brushy Creek’s subdivisions, its soil, and its builder-grade hardware better than any general handyman service ever will.
Why Latch & Post Gate Repair Is Brushy Creek’s Preferred Electric Gate Repair Company
Our Electric Gate Repair crews work Brushy Creek weekly, from the Woods of Brushy Creek to Cat Hollow and Sendero Springs. We see the same gates, the same operator brands, and the same clay-related post movement that every homeowner on your street deals with. Cody Beckman leads our team, and he holds every technician to the Cedarwell C.A.R.E. values on every visit: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work.
Homeowners in Brushy Creek tell us the same thing after their first repair: the technician put on shoe covers before stepping inside, laid drop cloths where the indoor keypad or control panel wiring runs, and sent a photo of the cleanup before leaving. That is not an upsell. It is the documented routine on every single job, and it is backed by the 365-Day Done Right Promise. If the repair is not right, we make it right. No argument, no fine print.
Every call to (626) 649-4572 is answered by a live person, 24 hours a day, seven days a week. Nights, weekends, holidays. No voicemail, no callback queue.
Electric Gate Motor in Brushy Creek
Electric Gate Motor repair in Brushy Creek often traces back to a gate that was never meant to be automated. Hundreds of homes in master-planned subdivisions here started with manual ornamental iron or cedar gates, then had a builder-grade operator bolted on years later, usually with undersized wiring or an extension cord run through landscaping. In triple-digit heat and high UV, that wiring fails. The motor burns out. Then the gate stops responding entirely.
A typical motor replacement or repair in Brushy Creek runs between $300 and $900, depending on whether we are swapping an existing operator, pulling new low-voltage wiring, or replacing a control board in the same housing. You will see the exact number in writing before we touch anything.
Operator replacement on gates that were originally manual
When a gate was installed as manual during the original build, a gate installation in Brushy Creek rarely includes a dedicated conduit run to it. We frequently pull a buried power feed through the clay, install the proper junction box, and then mount the new operator. That is the difference between a repair that lasts and one that fails again in a season.
Wiring and power runs under Brushy Creek clay
Expansive black clay heaves and settles with every drought-then-rain cycle. Shallow conduit flexes with the soil, and wire connections pull apart underground. We bury to the correct depth and use sealed connections so the power feed does not fail the next time the ground moves.
Gate Access Control in Brushy Creek
Gate Access Control in Brushy Creek means everything from the keypad mounted at the curb to the loop detector buried in the driveway and the receiver board inside the operator housing. When a Brushy Creek homeowner’s keypad stops accepting the code, the remote stops working, or the gate opens but will not close on its own, that is access control, and it is a different repair than the motor itself.
Keypad and remote repair in Brushy Creek generally runs $95 to $260. Replacing a failed control board or receiver runs higher, usually $250 to $550. A full loop detector installation, which many Brushy Creek driveways need because of how the concrete settles, lands between $400 and $800. Written price first, every time.
Keypads, remotes, and receivers
Brushy Creek’s HOA communities lean on keypads and remotes every single day. When a keypad fades in bright sun or a remote stops syncing, it is often the receiver board inside the operator, not the handheld unit. We test the full chain before we recommend replacing anything.
Loop detectors and safety photocells
Driveway loop detectors fail here because the concrete slabs shift and crack with the clay movement, cutting the loop wire. Photocells get knocked out of alignment when a post heaves even half an inch. We check both on every access control call in Brushy Creek, because one misaligned sensor is the difference between a safe gate and one that closes on a car, a kid, or a pet.
Trusted Brands We Service in Brushy Creek
Our technicians are factory-trained on the operators families in Brushy Creek actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common Linear and Viking receiver boards, DoorKing limit switches, and Ghost Controls arm assemblies stocked for quick turnaround on Brushy Creek jobs. That means fewer return trips and less time standing in the driveway with a dead gate.
Common Electric Gate Repair Problems We See in Brushy Creek Homes
- Post heave from expansive clay. Brushy Creek’s Vertisol soil expands and contracts more aggressively than the limestone ground just west in Cedar Park, pushing gate posts out of plumb every spring and fall. A gate that will not latch usually has a post problem, not a latch problem.
- Builder-grade operators failing in synchronized waves. Gates installed by the same developer sub share identical hardware and post depths. When one gate on a street misaligns or stops responding, the adjacent three often fail in the same season.
- Undersized wiring added after the original build. Many Brushy Creek gates were manual from day one, then automated later with extension cords or thin wire. Triple-digit heat and UV exposure breaks that wiring down fast.
- Photocells knocked out of alignment by shifting posts. A post moving just half an inch points the safety beam at the wrong angle. The gate refuses to close, or worse, closes when it should not.
Pricing for Electric Gate Repair in Brushy Creek, TX
Here is what electric gate repair typically costs in Brushy Creek. Motor replacement or repair runs $300 to $900. Keypad and remote work lands between $95 and $260. Control board or receiver replacement is $250 to $550, and a driveway loop detector installation runs $400 to $800. Full operator replacement with new wiring and a proper conduit run can exceed $1,200 on the larger ornamental iron gates.
What moves the number is the condition of the post, the wiring run, and whether we are working around an HOA-owned entrance or a private driveway gate. You will get a written price before any work starts, and that price will not change unless you ask us to add something. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Brushy Creek
Latch & Post Gate Repair covers Electric Gate Repair in Brushy Creek and the surrounding metro, including Houston, San Antonio, Dallas, and Fort Worth. Dispatch and scheduling are coordinated from our Austin office, and local crews serve Brushy Creek directly. If you own a gate in a neighboring city, call the same number. We will send a background-checked technician who knows the soil and the builders.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Brushy Creek
A dedicated buried conduit run, with properly sized low-voltage wire and a junction box, should have gone in before the concrete was poured and the landscaping went down. What actually happened on most Brushy Creek lots is an extension cord or undersized wire run through flower beds, which fails under heat and soil movement. We pull the correct buried power feed now, even though it means cutting through clay. The repair holds. Call (626) 649-4572 and we will tell you exactly what your lot needs.
Because the expansive black clay under your post footings heaves seasonally with rain and drought, pushing the hinge post out of plumb and pulling the latch and strike plate apart. The operator is usually fine. Fixing the post, not the panel or the latch, is the real repair. Call us before you buy a new latch kit you do not need.
No, and we see this constantly across Brushy Creek MUD subdivisions. The same developer sub installed the same contractor-grade operators at the same post depth on the same soil. The failures arrive in waves. If your neighbor’s gate misaligned or stopped responding, yours is often weeks behind the same problem. A quick inspection now costs less than a full operator replacement later. Call (626) 649-4572.
Block the beam with your hand while the gate is closing. If it reverses within a second or two, the photocells are working. If it keeps closing, the sensor is misaligned or dead. Do not test with a pet or a child. We check alignment and output on every automatic gate call in Brushy Creek, because a shifted post makes a working photocell dangerous. Call us if the beam does not reverse the gate.
Usually a dead capacitor, a bound gearbox from post movement, or a stripped limit switch. In Brushy Creek specifically, the post heave adds friction against the gate frame, so the operator clicks and stalls rather than cycling. We diagnose the cause instead of selling you a new operator. Many of these gates just need the post reset and the gearbox cleaned. Call (626) 649-4572 for an exact diagnosis and a written price.
If your gate is stuck, clicking, or closing on its own, call (626) 649-4572 now. A live person answers, day or night. We will give you a straight answer, a written price before any work starts, and a gate that closes like it should. Shoe covers on. Drop cloths down. Cleanup photo before we leave. That is how we work in Brushy Creek.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Brushy Creek and the surrounding Texas metro since 2009.