Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Bee Cave
Electric gate repair in Bee Cave typically runs $240 to $680 for most operator, motor, and control board work, and the majority of jobs we handle in Falconhead and Bella Colinas are completed within the same visit. Most of the automated gates across Bee Cave went in during the 2000-2018 master-planned build-out, which means a lot of operators are now reaching the same 10-to-20-year service threshold at the same time. If your gate won’t open, trips on hot afternoons, or the keypad stopped responding, call (626) 649-4572 and a live person answers, day or night.
We’re Latch & Post Gate Repair, part of the Cedarwell family of gate specialists. Cody Beckman leads our team, and we’ve focused on one trade since 2009: gates. Not fences, not garage doors, not general handyman work. Gates. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on.
Why Latch & Post Gate Repair Is Bee Cave’s Preferred Electric Gate Repair Company
Bee Cave is a specific kind of town. Nearly every home in communities like Falconhead, Bella Colinas, and Spanish Oaks sits on a Hill Country lot with actual grade changes, real caliche under the topsoil, and an HOA that has opinions about how your gate looks. A technician who only knows flatland gate work gets into trouble here fast. We know the difference between a gate that needs a fresh operator and one that needs its entire post footing reset into limestone, because we’ve done both within a few miles of the Hill Country Galleria in the past month.
Our reputation in Bee Cave is built on showing up with a written price before any work starts. That’s not an add-on and it’s not negotiable – it’s how every visit starts. We lay drop cloths on your floors and put on shoe covers before we step inside, and the technician sends you a photo of the clean-up before they leave. Every repair and installation is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
Response time to Bee Cave: our dispatch is coordinated from the brand’s Austin office and crews serve Bee Cave locally every day. Most homeowners we help call in the morning and see a technician the same afternoon, though we’ll always give you a straight answer when you call rather than a vague window.
Electric Gate Motor in Bee Cave
Electric gate motor repair in Bee Cave almost always boils down to one of three things: thermal overload from Hill Country heat, grade loading on sloped lots, or a control board that’s stopped talking to the rest of the system. On a 100°F August afternoon, the dark metal housing on a west-facing driveway along Bella Colinas Drive can push a sealed operator past its thermal cutoff in under an hour, and the gate simply won’t move until the housing cools. Swapping the motor without addressing the housing or the slope means you’ll call us again next summer.
Thermal Overload and Grade Loading
A standard swing gate motor replacement in Bee Cave runs $280 to $520 including the new motor and labor. On sloped lots, which are the rule here rather than the exception, we check the manufacturer’s grade spec before we quote anything. A motor arm that’s been carrying extra gravitational load for eight years can strip its gear assembly well ahead of schedule, and replacing the arm alone won’t fix the root problem.
Control Board Replacement
Control board repair or replacement in Bee Cave runs $210 to $410. Some boards fail after repeated thermal cycles; some fail after power surges that rode in on the same line as your whole-home electronics. Either way, our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite boards, so the right fix usually happens on the first visit.
Gate Access Control in Bee Cave
Gate access control in Bee Cave means keypads, remotes, safety sensors, and the wiring connections that tie them together, and in HOA-governed communities like Falconhead and Bella Colinas it also means respecting shared entry protocols. A community entrance gate that serves forty homes has a different access system than a private driveway gate, and repair work has to coordinate with the management company’s expectations about resident access during the outage.
Keypad and Remote Repair
A failing keypad in Bee Cave typically costs $120 to $240 to repair or replace, depending on whether we’re fixing the keypad unit itself or the wiring behind it. Most remotes run $60 to $140 installed and programmed. If your keypad lights up but the gate doesn’t respond, that’s often a relay issue at the control board rather than the keypad itself, and we test before we leave.
Safety Sensor and Entrapment Protection
Safety sensor realignment or replacement in Bee Cave runs $140 to $320. These are the photo eyes and contact edges that tell your gate to stop and reverse if a child, pet, or car is in the path. Bee Cave homeowners with young kids and dogs should test these every season because caliche soil shift can knock a post-mounted sensor out of alignment gradually, and a sensor that’s an inch off can fail to catch an obstruction.
Trusted Brands We Service in Bee Cave
We’re factory-trained on the brands Bee Cave homes actually have on their driveways. LiftMaster and DoorKing operators are common on older Falconhead installs, while Ghost Controls and Viking show up on newer Bella Colinas and Spanish Oaks gates. Electric Gate Repair shouldn’t be a trial-and-error exercise for your family, so we stock common Viking, Ghost Controls, DoorKing, and Elite parts in our local service vehicle for faster turnaround when you call from Bee Cave.
Common Electric Gate Repair Problems We See in Bee Cave Homes
- Afternoon thermal trips in summer: On 100°F+ days from June through September, sealed operator housings on west-facing terraced lots heat past thermal cutoff and the gate refuses to move until evening. We see this most on Bella Colinas and Falconhead driveways that catch full afternoon sun with no shade over the operator housing.
- Slope-related operator wear: Swing gates installed on grades steeper than the manufacturer’s spec load the operator arm beyond its design limit, which strips gear assemblies and burns out motors years early. The slope is the real failure; the motor is the symptom.
- Caliche post footing failure: Bee Cave’s limestone and caliche underlayer resists standard post-hole digging, and a gate post that’s shifted or sagged needs hammer drilling before fresh concrete can be set. Standard flatland post repair techniques don’t work here.
- HOA finish mismatch: Falconhead and Bella Colinas architectural control committees mandate specific gate finishes and styles. A repair that changes the visible appearance of your gate without approval means redoing the work, so we match the approved aesthetic before we quote.
Pricing for Electric Gate Repair in Bee Cave, TX
For electric gate repair in Bee Cave, here’s an honest look at what work costs in this market. Motor replacement runs $280 to $520. Control board repair runs $210 to $410. Keypad and remote work runs $60 to $240. Safety sensor work runs $140 to $320. A full operator replacement on a heavy wrought-iron driveway gate in Falconhead can reach $680 when the post footing also needs correcting. You’ll see the exact number in writing before any work begins, and estimates are free. Call (626) 649-4572 and we’ll give you a straight answer, not a range you have to guess from.
We Also Serve Cities Near Bee Cave
Our electric gate repair work regularly takes us beyond Bee Cave to homes in Houston, San Antonio, Dallas, and Fort Worth. Each of these is served by a local, independently owned and operated gate specialist that works to the same Cedarwell Care Promise we follow in Bee Cave: written price first, clean floors always, and a cleanup photo before departure. If you’re reading this from any of those cities, the same standards apply.
Serving Bee Cave, TX - Our Local Coverage Area
We’re based in the Bee Cave area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Bee Cave
In Falconhead, Bella Colinas, and most Bee Cave communities with architectural control committees, yes, any repair that changes the visible appearance of your gate – including finish, style, height, or hardware style – requires HOA approval before work starts. A like-for-like motor, board, or keypad swap that doesn’t alter appearance usually needs no approval, but we’ll help you confirm rather than guess. Call (626) 649-4572 and we’ll walk through what your community requires.
That’s almost always thermal overload. In Bee Cave’s June-through-September stretches of 100°F+ heat, the dark sealed housing around your operator acts like an oven on west-facing driveways, pushing the motor or control board past its thermal cutoff. The gate refuses to move until the housing cools, which is why it works again by evening. The fix is often ventilation, rehousing, or a heat-tolerant replacement motor rather than another swap of the same unit, and we’ll explain the difference when we inspect it. Call (626) 649-4572 for an exact diagnosis.
Yes, and it’s one of the most common structural repairs we do here because Bee Cave’s caliche underlayer means standard post-hole digging fails. We hammer-drill through the limestone or break the caliche before setting fresh concrete, then re-hang the gate to match your HOA’s approved style and finish. Post footing replacement in Bee Cave typically runs $400 to $800 depending on depth and access. Call (626) 649-4572 and we’ll quote it in writing before any work starts.
On most Bee Cave gates, it’s the hinge post, and the reason is the caliche underneath it. When the post footing shifts or settles into the limestone, the gate cants and the latch no longer lines up cleanly. A sag at the latch side usually means the hinge post needs resetting into fresh concrete; a sag across the panel means the gate frame itself is bowed. We’ll tell you which one it is before we touch anything, and we’ll match the approved Bee Cave finish when we set it back.
Test it once a season by placing a plastic trash can or a soft object in the gate’s path and closing it. The gate should stop and reverse on contact with the edge sensor, and never close on the object. If it keeps closing or only reverses after significant force, your entrapment protection needs immediate attention, and with kids and pets around Bee Cave driveways that’s not a test to skip. We check every entrapment circuit on every repair visit, and we can walk you through the test yourself. Call (626) 649-4572 to schedule a safety check.
Here’s What a Bee Cave Repair Actually Looks Like
A homeowner in Bella Colinas called us about a LiftMaster swing gate that kept tripping out by mid-afternoon. The operator was sealed in a dark metal housing on a west-facing driveway, and the slope of the lot had been loading the arm far past the manufacturer’s grade limit for years. Not a new problem – a slow failure that had been building since the gate went in during the 2000s build-out. We corrected the sag at the hinge post, reset the post footing into the caliche, and recommended a slide-gate conversion rather than simply swapping the burned-out operator for a third time. The gate now runs the full afternoon without a single thermal trip. That’s the work we do in Bee Cave, and it’s exactly the kind of job a generic gate company gets wrong three separate times before giving up. We got it right once, and the 365-Day Done Right Promise means if it isn’t right, we’re back out to make it right.
When you’re ready for a written price and a technician who’ll show up with shoe covers, drop cloths, and a straight answer, call (626) 649-4572. A live person answers, 24/7, nights and weekends included.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Bee Cave since 2009.