Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Aldine
Electric gate repair in Aldine usually means one of two jobs: a heavy commercial slide gate at a warehouse or trucking yard that quit moving, or a residential swing gate that a gumbo-clay heave finally pulled out of plumb. Either way, the fix needs to happen fast because an open or stuck gate is a security and access problem, not a cosmetic one. Latch & Post Gate Repair has been part of the Cedarwell family since 2009, and our techs answer calls from Aldine residents and business owners every day. Call (626) 649-4572 and a live person picks up, 24 hours a day, seven days a week.
We work on the equipment Aldine actually runs: FAAC and BFT slide-gate operators on commercial lots, plus Viking and Linear swing-gate openers on residential driveways. If you’re looking for Gate Installation - Aldine, we handle that too. Before any work starts, you get a written price. No upselling, no technician inventing scope on the spot.
Why Latch & Post Gate Repair Is Aldine’s Preferred Electric Gate Repair Company
Aldine isn’t a typical suburb. The industrial corridor along Aldine Bender Road and the Hardy Toll Road corridor produces a steady stream of commercial gate failures, while the older ranch-home neighborhoods just west of I-45 produce residential swing-gate problems all their own. We send background-checked, uniformed technicians who know both worlds. They arrive with shoe covers and drop cloths as a matter of routine, even for outdoor gate work, because the job usually means walking through a home or office to reach the control panel. Clean floors, clean entryways, and a photo of the cleanup before the tech leaves. That’s the Cedarwell C.A.R.E. standard, and it’s not an upsell. It’s just how the crew works.
We carry parts for the brands Aldine owns, so most repairs finish on the first visit rather than after a second trip back from the Houston parts warehouse. And when a flood event knocks out a dozen operators along the same drainage basin, our dispatchers already know which Aldine neighborhoods and commercial lots are hardest hit. You call, you get a person, and a tech heads your way.
Gate Opener Repair in Aldine
Gate opener repair in Aldine most often comes down to a dead control board, a burned capacitor, or a motor that hums but doesn’t move. In commercial settings, we see a lot of FAAC and BFT hydraulic operators that have run for years in humid, flood-prone conditions until a storm surge finally killed the low-voltage circuit. On residential lots, Viking and Linear swing-arm openers fail more quietly: a clicking relay, a remote that stopped pairing, a keypad that’s dark. A typical opener repair in Aldine runs $180 to $520, depending on whether we’re replacing a capacitor, a control board, or the entire operator head. You’ll see the exact number in writing before we touch a single bolt.
Control Board and Capacitor Replacement
The control board is the brain of the gate, and in Aldine it lives in a metal box that sees rain, humidity, and occasionally standing floodwater. When a board fails, the gate either won’t respond to the remote or opens but won’t close. We diagnose the specific failure, replace with a factory-spec part, and reseal the enclosure against Aldine’s humidity.
Motor and Gearbox Service
Some operators die slowly: the motor takes longer to open the gate, the gearbox whines, or the gate shudders partway through its travel. That’s usually worn gears or a failing capacitor. We can often rebuild the operator on site rather than replacing the whole unit, which usually keeps an Aldine homeowner in the $200 to $380 range instead of $900-plus.
Automatic Gate Repair in Aldine
Automatic gate repair in Aldine usually means a residential driveway swing gate that opens with a remote or keypad. These systems have many failure points: the operator arm, the safety sensors, the receiver board, the keypad, and the physical hinges and posts. When the gate won’t open, won’t close, or reverses mid-travel, the problem is usually one specific component rather than the whole system. A full automatic gate repair in Aldine ranges from $150 for a simple sensor realignment to $600 for a new operator arm and board. Free estimates are standard, and the written price always comes before any work begins.
Safety Sensor and Loop Detector Repair
Aldine’s heavy truck traffic puts extra stress on vehicle loop detectors, especially at commercial entrances where 18-wheelers cross the same spot hundreds of times a week. When a loop fails, the gate doesn’t detect a vehicle and won’t open automatically. We test the loop, trace the wiring, and either repair the connection or install a new loop in the pavement or gravel.
Remote Control and Keypad Programming
Sometimes the gate operator is fine but the access devices stopped talking to it. A remote that worked yesterday but doesn’t today, a keypad that won’t accept the code, a key fob that needs reprogramming after a battery change. These are quick fixes, often $75 to $150, and we can program multiple remotes or keypad codes during the same visit.
Trusted Brands We Service in Aldine
We’re factory-trained on the brands Aldine properties actually run. That means FAAC and BFT for commercial slide gates, Viking for welded residential steel, and Linear for swing-arm driveway operators. If you own a warehouse gate with a BFT operator, you don’t want a tech learning the brand on your clock. We keep common replacement boards, capacitors, remote transmitters, and safety sensors stocked for these brands, which shortens turnaround for Aldine customers. When a part isn’t on the truck, we can source it from the Houston warehouse same day for most common models.
Common Electric Gate Repair Problems We See in Aldine Homes
- Flood-soaked operators. Aldine sits in multiple Harris County floodplains, and when water rises, it wicks into the low-voltage electronics inside operator housings. A board that was fine on Monday can be corroded beyond recovery by Wednesday, leaving a gate stuck mid-travel or dead in the open position.
- Heaved posts from gumbo clay. Aldine’s expansive clay soil swells when wet and shrinks in drought. Driveway swing-gate posts set in that soil move over time. The gate that latched perfectly in August drags the concrete by January and refuses to close all the way. We realign posts and re-hang gates so they close square again.
- Silt-packed slide-gate tracks. Storm debris and floodwater deposit silt and gravel in rail tracks on commercial slide gates. The operator strain increases, the rack and pinion wear accelerates, and eventually the gate jams or the motor overheats. We clear tracks, re-lubricate, and reset the travel limits.
- Failed safety sensors. Aldine’s humidity and storm-driven moisture corrode the photo-eye sensors on automatic gates. When sensors fail, the gate may refuse to close, reverse unexpectedly, or sit in a constant “obstruction” fault. Replacing or realigning the sensors restores normal operation.
Pricing for Electric Gate Repair in Aldine, TX
Most electric gate repairs in Aldine fall into clear ranges. A simple keypad or remote reprogram runs $75 to $150. Safety sensor replacement typically lands between $150 and $280. A control board replacement for a residential opener is usually $250 to $480. Full operator replacement on a commercial slide gate, including the motor and board, can run $1,200 to $3,800 depending on gate weight and span. The written quote is free, and it’s the exact number you’ll pay unless something hidden is discovered, in which case we stop and re-quote before continuing. Nobody works surprises.
We Also Serve Cities Near Aldine
While this page is written for Aldine, our crews also take calls from nearby areas including Houston, San Antonio, Dallas, and Fort Worth. If you’re searching for Electric Gate Repair in the broader region, or specifically for Electric Gate Repair in Aldine, call (626) 649-4572 and our dispatchers will route you to the right tech for your zip code.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Aldine
Aldine’s dense industrial and logistics corridor along the Hardy Toll Road and Aldine Bender Road means the area has far more warehouse, trucking yard, and storage facility entrances than surrounding residential suburbs. A 40-foot commercial slide gate at a trucking yard cycles hundreds of times a day under heavy vehicle traffic, so it fails more often and more dramatically than a residential swing gate. Latch & Post handles both, but the commercial share of calls in Aldine is noticeably higher than in incorporated suburbs like Humble or Spring. Call (626) 649-4572 for commercial slide-gate service in Aldine.
Yes, it’s one of the most common failure modes we see across Aldine. Much of the community sits in Harris County floodplains, and floodwater submerges operator housings, wicking into low-voltage boards and corroding connections. The repair is straightforward: dry out the enclosure, replace the damaged board or transformer, and reseal the housing. We’ve handled dozens of exactly this repair after major storm events. Call (626) 649-4572 and a tech can assess flood damage to your gate operator.
Aldine’s gumbo clay soil expands when wet and shrinks in drought. After a dry summer, gates often close fine. After winter rains, the soil swells and heaves the gate posts out of plumb, so the gate leaf drops and drags on the concrete or fails to reach the latch. The fix is post realignment, sometimes with new concrete footings. It’s a chronic, recurring call in Aldine’s older ranch-home neighborhoods, and we approach it as a straightening job, not a temporary shim. Call (626) 649-4572 for a post-realignment estimate.
Yes. Several Aldine-area properties, especially larger lots and rural transition zones on the community’s north and east edges, use solar-powered gate openers because running grid power to the entrance is impractical. We service solar operators from the same brands we handle on mains power, including FAAC and Viking. Battery replacement, panel cleaning, charge-controller testing, and motor service are all part of the job. Call (626) 649-4572 and tell us your setup, and we’ll confirm the right tech and parts for a solar-powered opener.
Check the power to the operator: is the breaker on, is the GFCI tripped, is the disconnect switch in the on position? Then check the battery backup if your unit has one. Test the remote’s battery with a fresh one. Finally, look at the gate itself: is anything physically blocking the path, or is the gate off its track? If all those are fine and the gate still won’t operate, call (626) 649-4572. A live person answers, and we’ll dispatch a tech to Aldine with the right parts on the truck.
Need a different fix? We’re the team for Electric Gate Repair anywhere in the Aldine area, from a 40-foot commercial slide gate on Aldine Bender to a chain-link swing gate in a 1960s ranch neighborhood off Aldine Mail Route. Call (626) 649-4572 for a free estimate, and a live person answers around the clock. Your price is written, your floors stay clean, and if it’s not right in 365 days, we make it right. That’s the Latch & Post promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Aldine and the Houston metro area since 2009.