Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Glendale, CA
Latch & Post Gate Repair is a Glendale gate specialist that works on the heavy custom iron and steel gates this city is known for. Glendale’s hillside terrain, Santa Ana wind exposure, and older 1920s to 1950s housing stock create repair conditions you won’t find in flat neighboring cities. We’re part of the Cedarwell family and have operated since 2009, focused on one trade: the latch that holds the gate and the post that carries it. Call (626) 649-4572 and a live person answers, any hour.
Why Glendale Homes Are Different
Glendale is home to one of the largest Armenian-American communities outside Armenia, and that community has a long tradition of investing in ornate, custom-fabricated wrought-iron and steel entry gates as a mark of home pride. Our technicians work on elaborate decorative swing gates here far more often than in Burbank or Pasadena, which means custom ironwork restoration and high-torque operator calibration are daily work, not occasional exceptions.
The terrain adds another layer. In Chevy Chase Canyon, Brockmont, and upper Glenoaks, driveways regularly exceed a 10 to 15 percent grade. Standard V-track slide gates simply don’t work on those slopes, so a large share of Glendale calls involve diagnosing failed cantilever slide systems or misaligned dual-swing gates. Meanwhile, in flat-area neighborhoods like Rossmoyne and Adams Hill, 1920s through 1950s Spanish Colonial Revival and Craftsman bungalows often have original wrought-iron swing gates sitting on aging post footings that the dry season and wet winters have loosened or cracked. Santa Ana winds funneling through the Verdugo Mountain passes bend hinges and warp frames each season, and long dry summers desiccate wood posts while soil moisture swings crack the concrete around metal ones. A Glendale gate repair is rarely a simple swap; it’s a diagnosis of terrain, weather, and age in combination.
Our Main Glendale Services
Most Glendale homeowners reach out for one of three things: a gate that won’t close right, a new gate built for a sloped or decorative property, or an electric operator that has stopped responding. Each has its own Glendale page below.
Gate Repair in Glendale
When a decorative iron gate sags or a latch won’t catch, Glendale’s terrain usually shares the blame. Sloped driveways shift post footings, and Santa Ana winds stress hinges until the gate rubs against the ground or the post. Gate Repair in Glendale covers hinge replacement, post resetting, frame straightening, and latch work on the custom iron gates common in hillside neighborhoods. We carry the hardware to match older Spanish Revival and Craftsman-era styles, and every repair starts with a written price you approve before we touch anything.
Gate Installation in Glendale
A new gate in Glendale has to account for the driveway grade and the architectural character of the home. Gate Installation in Glendale includes measuring for cantilever or dual-swing configurations on sloped sites, matching ironwork style to the existing house, and choosing hardware rated for Santa Ana wind loads. Whether it’s a custom drive gate in Chevy Chase Canyon or a pedestrian gate off a Craftsman bungalow in Adams Hill, the install includes a written quote, shoe covers, drop cloths, and a cleanup photo before we leave.
Electric Gate Repair in Glendale
Electric gates in Glendale take a beating from wind and grade, and operators are often undersized for the heavy decorative gates they’re driving. Electric Gate Repair in Glendale covers operator replacement, safety sensor alignment, limit switch calibration, and wiring diagnostics on FAAC, BFT, Linear, Viking, and other brands families here actually own. We’re factory-trained to get the right fix on the first visit, and we test the full open and close cycle before we call the job done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Glendale
We’re factory-trained on FAAC, BFT, Linear, and Viking operators, and we stock common boards, arms, and safety sensor parts locally so Glendale jobs don’t wait on shipping. Learn more about our brands.
Pricing for Gate Company in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Standard gate-latch replacement | $165 - $285 |
| Hinge replacement (pair, standard iron gate) | $240 - $410 |
| Post reset or footing repair | $385 - $720 |
| Frame straightening after wind damage | $275 - $490 |
| Cantilever slide gate hardware repair | $520 - $940 |
| Dual-swing gate realignment on sloped driveway | $340 - $610 |
| Electric operator diagnostic and limit adjustment | $185 - $320 |
| Operator replacement (residential, labor included) | $690 - $1,450 |
| Safety sensor replacement | $215 - $385 |
| Pedestrian gate installation (standard iron) | $820 - $1,750 |
What pushes Glendale prices toward the higher end is usually the slope of the driveway or the weight of a custom decorative gate. A cantilever system on a 12 percent grade costs more than a standard slide gate on flat ground because the hardware and the labor to set it are different. Whatever the case, the price is written down and agreed to before any work begins. No surprises, no upselling at the door.
Neighborhoods We Serve in Glendale
We cover all of Glendale, from the flat bungalow streets to the steepest canyon drives. Here are a few of the neighborhoods where we work most often:
- Rossmoyne
- Adams Hill
- Chevy Chase Canyon
- Brockmont
- Upper Glenoaks
Most Glendale calls have a technician scheduled the same day or next. Hillside jobs sometimes take an extra day of scheduling because the work can’t be rushed on a steep grade.
Service Area – Cities Near Glendale
Beyond Glendale, we work in neighboring communities with different gate profiles. Burbank, CA has mostly flat driveways and standard swing or slide gates. West Hollywood, CA has smaller lots and more pedestrian gates. Altadena, CA and Pasadena, CA share some of Glendale’s hillside challenges but with older carriage-gate patterns. Each page on this site goes into the specifics for that city.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Glendale
Same day in most cases, next day at the latest for hillside jobs that need extra setup. We schedule around your day, and a live person answers the phone at (626) 649-4572 so you’ll know the exact window before we arrive.
Most repairs don’t require a permit, but some Glendale HOAs, especially in hillside communities, have rules about gate style, height, or operator noise. We’re familiar with the common restrictions and can tell you what usually applies. We’ll flag anything that needs sign-off before work gets scheduled.
Yes. We put on shoe covers and lay drop cloths before entering any part of the property. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters for your household.
If you need a gate looked at in Glendale, call Latch & Post Gate Repair at (626) 649-4572 for a free estimate. A real person answers, and you’ll get a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon