Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Wilton Manors, FL
We’re Latch & Post Gate Repair, the gate company Wilton Manors homeowners call when a hinge seizes, a motor stops responding, or a new gate needs to fit a 1950s concrete driveway that was never built for one. Wilton Manors jobs are different. The Middle River canal network wraps this city in brackish air that corrodes gate hardware years ahead of schedule, and the compact ranch homes here rarely give a gate installer a level surface to work with. If your gate is sticking, sagging, or dead at the keypad, call us at (626) 649-4572 and we’ll send a technician who knows what canal humidity does to steel.
Why Wilton Manors Homes Are Different
The Island City earned its nickname honestly. The Middle River and its branching canals cut through Wilton Manors so thoroughly that a large share of properties sit within feet of brackish water, even when the street itself looks perfectly inland. That changes gate work at a material level. We regularly replace motor terminal blocks on canal-facing gates that look fine from the outside, because moisture wicks up from ground level and eats the low-voltage wiring at the connection points. Galvanized steel hardware that would last a decade in Cooper City shows pitting and rust bloom here in two to three years.
The housing stock adds another layer. Most Wilton Manors homes are 1950s-to-1970s concrete-block ranch houses on compact lots, and many have been upgraded over the years with driveway gates and privacy fencing that were never part of the original build. Retrofit gates on these properties often sit on cracked or uneven concrete aprons, which means alignment and swing clearance become the real job. Along the canal fingers off NE 6th Avenue especially, we specify marine-grade stainless hinges and sealed operator enclosures as standard practice, not an upsell, because standard powder-coated steel simply will not hold up here.
Our Main Wilton Manors Services
These are the three gate services Wilton Manors homeowners call us about most often. Each has its own Wilton Manors page with local pricing and specifics, because a gate repair, a full installation, and an electric gate failure are very different jobs.
Gate Repair in Wilton Manors
A gate repair in Wilton Manors usually starts with hardware that has been fighting brackish air for years: seized hinge pins, rusted latch mechanisms, or a post that has shifted in sandy soil. On canal-facing properties, cosmetic rust on the gate face is often hiding worse damage at the hinge mounts and motor mounts below the sightline. We bring marine-grade replacement hardware when the waterline is close, and we quote the full price in writing before we touch anything. See Gate Repair in Wilton Manors for detailed pricing on the most common Wilton Manors repairs.
Gate Installation in Wilton Manors
New gate installations here almost always mean working with an existing concrete slab or apron that was poured decades before the gate was ever imagined. Wilton Manors driveways are narrow, and many have settled or cracked, which means we are often shimming posts, adjusting swing arcs, or reinforcing the post footings before the gate itself goes in. We install gates sized to the actual opening, not a catalog dimension, and we account for swing room against fences, planters, and the neighbor’s property line. Gate Installation in Wilton Manors covers the process and pricing in detail.
Electric Gate Repair in Wilton Manors
Electric gate failures in Wilton Manors follow a pattern we have seen hundreds of times: the operator works fine for a year or two, then the terminal block corrodes because humid, salt-tinged air has been working on the low-voltage connections the whole time. On canal-facing homes, we open the operator enclosure and find corrosion even when the gate itself looks cosmetically sound. We service boards, wiring, keypads, safety loops, and motors from the brands homeowners actually own, and we always check the full low-voltage run before declaring a fix. Electric Gate Repair in Wilton Manors has the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Wilton Manors
We are factory-trained on the equipment Wilton Manors homes actually run, including Linear swing and slide operators, Viking and Ghost Controls systems, and DoorKing operators. See our brands for the full list. When we arrive with the right board or arm on the truck, the gate gets fixed on the first visit instead of the second.
Pricing for Gate Company in Wilton Manors, FL
| Service | Typical range in Wilton Manors |
|---|---|
| Gate hinge replacement (pair) | $180-$340 |
| Gate latch replacement | $140-$290 |
| Gate alignment and sag correction | $160-$350 |
| Gate post reset or re-cement | $250-$550 |
| Gate operator motor replacement | $450-$900 |
| Control board replacement | $250-$550 |
| Keypad or intercom replacement | $180-$400 |
| Safety sensor or loop repair | $180-$375 |
| Single swing gate installation | $1,400-$3,200 |
| Double swing gate installation | $2,800-$5,800 |
| Slide gate installation | $3,000-$6,500 |
| Electric operator retrofit (swing) | $900-$1,800 |
What pushes a Wilton Manors job toward the top of these ranges is usually the canal factor: corroded terminal blocks that need full rewiring, hinges that require drilling out and replacing with marine-grade stainless, or a post that has rotted at the base because brackish moisture has been working on it for years. Whatever the number, you will see it in writing before any work starts. No add-ons at the end, no surprises.
Neighborhoods We Serve in Wilton Manors
We cover the full city of Wilton Manors, including the canal-front streets where the water is closest and the inland blocks where drainage and humidity still take their toll on gate hardware.
- Middle River Terrace and the canal fingers off NE 6th Avenue
- Westside Wilton Manors near Wilton Drive
- Colohatchee and the blocks near Colohatchee Park
- The area around Hagen Park and NE 9th Avenue
- Canal-front homes along the North Fork of the Middle River
Most Wilton Manors gate calls can be scheduled the same day or next day, and our dispatchers coordinate from our Miami area office to route the nearest technician to you.
Service Area – Cities Near Wilton Manors
While this page covers Wilton Manors specifically, our crews also serve homeowners in nearby Florida communities. If you are just outside the Island City, you can also reach us in Miami, FL, Jacksonville, FL, Tampa, FL, or Orlando, FL. Each area page covers local gate conditions and pricing for that market.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wilton Manors
Most Wilton Manors calls are scheduled same-day or next-day. A gate stuck open or a gate stuck closed with a car trapped behind it gets priority routing, and our dispatchers coordinate from the Miami area office to send the nearest available technician. Call (626) 649-4572 and a live person will answer, day or night.
Some Wilton Manors gate installations require a permit, particularly if the gate is on the front setback or includes an electric operator with new conduit. We can tell you what applies to your property and handle the paperwork where needed. We will walk through this before any work starts.
Yes. Several Wilton Manors neighborhoods have specific gate height, finish, and style requirements, and we coordinate with your association’s guidelines so the finished gate does not create a violation you have to fix later. Bring us the HOA spec sheet and we will quote to it.
If your gate is sagging, seized, or dead at the keypad, call Latch & Post Gate Repair at (626) 649-4572. We’ll give you a straight price over the phone or in person, put it in writing before any work begins, and leave your gate working and your driveway clean.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilton Manors Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon