Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Steilacoom, WA
Steilacoom sits perched above Puget Sound, and the salt air does not treat gate hardware kindly. This is Washington’s oldest incorporated town, settled in 1854, and many of its gates are as old as its houses. At Latch & Post Gate Repair, we work on gates that belong to Folk Victorian porches and Craftsman garden paths alike. If your gate sags, drags, or no longer latches, call us at (626) 649-4572. A live person answers, and we’ll give you a straight written price before any work touches your property.
Why Steilacoom Homes Are Different
Steilacoom’s Historic District is not a museum. It is a living neighborhood where original ornamental iron and milled-wood picket gates still stand against the marine fog. Homeowners there are guided, sometimes strongly, by preservation norms that favor repairing in kind over swapping in modern aluminum. That means matching period-appropriate hardware, restoring hand-forged hinges, and keeping the original silhouette of a gate that has stood since the 1880s. Off-the-shelf parts from a big-box store simply do not fit these gates.
The bluff does its own work, too. Salt-laden wind off Commencement Bay accelerates rust faster than it does a few miles inland. On waterfront-adjacent streets near the ferry dock, we regularly find the hinge side and bottom rail of iron gates corroding first and fastest. Standard galvanized fasteners fail within two to three seasons in these exposures. We use stainless-steel hardware as a practical necessity, not an upgrade, on any lasting repair near the water.
Our Main Steilacoom Services
Most Steilacoom calls fall into two groups: restoring an existing gate, or planning a new one that suits an older home. We also handle the electric openers that more homeowners are adding to driveway gates. Each service has its own dedicated page with local pricing and details.
Gate Repair in Steilacoom
Gate repair in Steilacoom often means matching a historic profile. A sagging picket gate on a Queen Anne home needs its original mortise-and-tenon joinery reinforced, not just a new hinge screwed into rotted wood. We source period-appropriate hardware, repack posts with proper drainage, and preserve the original ironwork wherever possible. See Gate Repair in Steilacoom for the full breakdown, including what to expect on a bluff-front property.
Gate Installation in Steilacoom
New gates in Steilacoom must respect the town’s architectural character. A modern steel panel can look jarring next to a home built in 1905. We help homeowners choose materials and hardware that read as period-appropriate: milled cedar pickets, wrought-style iron, or a mix that echoes the neighborhood’s older fences. We also account for the soft, moisture-heavy soil on the bluff. See Gate Installation in Steilacoom for options and written pricing.
Electric Gate Repair in Steilacoom
Salt air attacks electric gate components as surely as it attacks iron. In Steilacoom, we see motors and control boards fail early when housings are not sealed against the marine environment. We service the brands families actually own, including FAAC and Linear, and we replace parts with corrosion-resistant fittings where the location demands it. See Electric Gate Repair in Steilacoom for same-visit diagnostics and repair details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Steilacoom
We are factory-trained on the brands Puget Sound homeowners own, including FAAC, BFT, Viking, and Linear. Our technicians stock common replacement parts for these systems, which shortens turnaround on many Steilacoom repairs. For a full list and what we carry, see our brands.
Pricing for Gate Company in Steilacoom, WA
| Service | Typical range in Steilacoom |
|---|---|
| Gate latch replacement | $95 - $240 |
| Hinge replacement (pair) | $120 - $350 |
| Wood gate frame rebuild (picket) | $300 - $650 |
| Iron gate rust treatment and repaint | $250 - $700 |
| Post stabilization (dig and reset) | $200 - $500 |
| Gate opener diagnostic | $90 - $180 |
| Opener motor replacement | $450 - $1,100 |
| New pedestrian gate (wood, standard width) | $600 - $1,400 |
| New driveway swing gate (single, manual) | $1,200 - $3,500 |
| New electric gate system (opener, arms, safety edges) | $2,800 - $7,000 |
Prices in Steilacoom run toward the upper end when a job involves historic hardware matching or stainless-steel fasteners for a waterfront exposure. You will see the exact number in writing before any work begins. No pressure, no surprises.
Neighborhoods We Serve in Steilacoom
Our crews work throughout Steilacoom, from the Historic District up to the newer streets along the hill. We know where the salt hits hardest and which lots have soft drainage. Typical response for the area is same-day or next-day.
- Historic District
- Ferry Dock area
- Sunset Beach vicinity
- Steilacoom Heights
- Balfour area
Service Area – Cities Near Steilacoom
Our Steilacoom crews also serve the neighboring communities. We work regularly in University Place, WA, Lakewood, WA, DuPont, WA, and Tacoma, WA. Each city has different housing stock and gate conditions, but the same written-price promise applies.
Serving Steilacoom, WA - Our Local Coverage Area
We’re based in the Steilacoom area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Steilacoom
In most cases we schedule a visit within one business day. For a gate that has failed open or will not close, call us and we will work you into the same day when possible. A live person answers the phone around the clock at (626) 649-4572.
Some improvements in the Historic District require design review, but routine repairs that match existing materials generally do not. We can tell you what we see on your gate and what questions to ask the town. The goal is a repair that looks original, and that usually keeps the approval process simple.
We will give you options that fit your home’s character and your budget. Many Steilacoom owners choose to rebuild the original picket profile in cedar rather than switch to an aluminum panel. We explain what each path costs before you commit to anything.
If you need a gate looked at in Steilacoom, call (626) 649-4572 for a free estimate. We will send a technician who wears shoe covers, lays down drop cloths, and leaves you with a photo of the clean-up before walking back to the truck.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Steilacoom Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick