Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Riviera Beach, FL
Riviera Beach gate work is shaped by salt air and shifting soil. Homes here sit between the Atlantic spray off Singer Island and the brine of the Intracoastal Waterway, which means standard galvanized hardware corrodes within a year or two. Most jobs we see involve either marine-grade upgrades or repairs to posts that have begun to lean in the sandy, moisture-saturated ground. If you need a gate company in Riviera Beach, FL, call us at (626) 649-4572 and we’ll give you a written price before any work starts.
Why Riviera Beach Homes Are Different
Riviera Beach sits directly on the Intracoastal Waterway with Singer Island as its barrier-island oceanfront. That geography creates a double-source salt-air environment: Atlantic spray from the east and brine off the waterway from the west. For gates, this means hardware that would last a decade inland in West Palm Beach or Lake Worth often fails here in eighteen to twenty-four months. We regularly replace powder-coated steel hinge plates and operator arms on Singer Island condo gates with marine-grade aluminum and sealed motor housings. It’s not a premium upsell – it’s the only spec that survives.
Inland, the housing stock tells a different story. Much of it dates to the 1950s through 1970s concrete-block construction, with original post-set fence footings now shifting in South Florida’s sandy, water-logged soil. We see chronic post-lean and gate-sag issues that require re-setting posts in deeper concrete rather than simply adjusting hinges. The Port of Palm Beach corridor adds another layer: heavy truck and vessel traffic, combined with persistent onshore winds, accelerates corrosion on commercial slide and swing gates faster than almost anywhere in Palm Beach County.
Our Main Riviera Beach Services
Most Riviera Beach homeowners call us about two things: a gate that no longer closes properly, and electric operators that have failed from salt exposure or power surges. Each service has its own page below.
Gate Repair in Riviera Beach
Gate repair here usually means one of three things: a post that has shifted in sandy soil, hinges or latches corroded by salt air, or a gate that sags because the original footing wasn’t deep enough for South Florida ground conditions. We re-set posts in concrete, replace hardware with marine-grade stainless steel where the location demands it, and align the gate so it swings cleanly without dragging. Riviera Beach homes built in the 1960s and 1970s often have original gate posts that were set in shallow footings – those need re-setting rather than patching. See Gate Repair in Riviera Beach for full details and pricing.

Gate Installation in Riviera Beach
New gate installation in Riviera Beach starts with the location. A gate two blocks from the ocean on Singer Island needs marine-grade aluminum or stainless steel hardware from the start – installing standard powder-coated steel there means replacing it again within two years. Inland, we also account for soil movement by setting posts deeper than code minimums. We measure, quote, and install with the same written-price promise as every other job: the number you approve is the number you pay. See Gate Installation in Riviera Beach for the full process.

Electric Gate Repair in Riviera Beach
Electric gate repair here is heavily influenced by the marine environment and the area’s power conditions. Salt spray corrodes control boards and limit switches, while coastal humidity shortens the life of unsealed motors. Singer Island condominium gates also see high cycle counts from resident and valet traffic, which wears operator arms faster than residential use. We diagnose the specific failure, replace with sealed or marine-grade components where needed, and test the full open-close cycle before we leave. See Electric Gate Repair in Riviera Beach for service specifics.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Riviera Beach
We’re factory-trained on Linear, Viking, Ghost Controls, and DoorKing equipment, among others. We keep common operator parts and safety-edge components stocked for these brands, which means most Riviera Beach repairs can be completed in a single visit rather than waiting on a shipped part. See our brands page for the full list of manufacturers we service.
Pricing for Gate Company in Riviera Beach, FL
Every price below is quoted in writing before work starts. Salt-air corrosion tends to push Riviera Beach jobs toward the higher end when marine-grade hardware is required, but you’ll always know the exact number before we touch anything.
| Service | Typical range in Riviera Beach |
|---|---|
| Gate latch replacement | $180-$340 |
| Hinge replacement (pair) | $220-$400 |
| Post re-setting (single post) | $350-$650 |
| Gate re-alignment and sag correction | $200-$380 |
| Drop rod or cane bolt install | $140-$260 |
| Gate stop installation | $120-$220 |
| Marine-grade hardware upgrade (hinges and fasteners) | $420-$750 |
| Basic gate installation (single swing, aluminum) | $1,400-$3,200 |
| Driveway gate installation (steel or aluminum, includes posts) | $3,500-$7,500 |
| Electric operator replacement (residential swing) | $900-$2,800 |
| Control board replacement | $350-$700 |
| Safety edge or photo eye replacement | $250-$450 |
In Riviera Beach, the two biggest price drivers are proximity to salt water and post condition. A gate within two blocks of the Intracoastal or the ocean will almost always need marine-grade stainless hardware, and a post that has been shifting for years in sandy soil will need re-setting rather than a simple hinge fix. You’ll get the written price before we begin, and that’s the price you pay.
Neighborhoods We Serve in Riviera Beach
We work across Riviera Beach, from the Singer Island oceanfront and Intracoastal-adjacent communities to the inland concrete-block neighborhoods built in the mid-century boom. Response time across the Riviera Beach area is typically same-day or next-day for repair calls, depending on the schedule when you call.
- Singer Island
- Inlet Harbor
- Intracoastal Park
- President’s Country Club
- West Riviera
Service Area – Cities Near Riviera Beach
Our Riviera Beach crews also serve nearby South Florida communities. If you’re in Jacksonville, FL, Miami, FL, Tampa, FL, or Orlando, FL, each of those areas has its own local Latch & Post team working to the same written-price and cleanup standards. Dispatch and scheduling are coordinated from our Miami (South FL) office, with crews serving Riviera Beach locally.
Serving Riviera Beach, FL - Our Local Coverage Area
We’re based in the Riviera Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Riviera Beach
For repair calls in Riviera Beach, we can usually arrive same-day or next-day. When you call (626) 649-4572, you’ll speak with a live person who can confirm the next available window for your neighborhood. Installations are scheduled after we measure and provide a written quote.
On Singer Island and in gated communities, yes – most associations require approval before any gate modification. We can provide the specs and materials list your HOA will ask for, and we’ll install to whatever standard the association requires, including Miami-Dade wind-load compliance where applicable.
Yes, and it’s not optional. Standard powder-coated steel within two blocks of the ocean or Intracoastal will typically need full replacement within eighteen to twenty-four months. Marine-grade aluminum, stainless steel hinges, and sealed motor housings are the standard spec that actually lasts in Riviera Beach.
If your gate needs attention in Riviera Beach, FL, call Latch & Post Gate Repair at (626) 649-4572. Cody Beckman and our team will give you a straight answer, a written price, and a gate that works. Estimates are free, and every job is backed by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Riviera Beach Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon





Before
After
Before
After
Before
After