Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Parkway, CA
Gate repair in Parkway, CA almost always comes back to the ground under the gate. The shrink-swell clay soil here moves with every rain cycle, and that movement is what pulls posts out of plumb, throws latches out of line, and makes gates sag within a season or two. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on nothing but gates: repairing them, installing them, and keeping the electric ones running. If your gate in Parkway is dragging, sticking, or refusing to close, call (626) 649-4572 and we’ll give you a written price before any work starts.
Why Parkway Homes Are Different
Parkway sits on Sacramento County clay that expands when wet and shrinks when dry. That’s not a footnote; it’s the main reason gate posts in this neighborhood lean. A post set in a standard 2-foot footing will routinely get pushed 2-3 inches out of plumb after one serious rain season, and then the dry summer shrinks the soil away from the concrete collar entirely. The result is a gate that closed fine in October and drags on the latch side by February. Any Gate Repair in Parkway that only swaps the hardware and ignores what’s happening under the post is a temporary fix. We address footing depth and concrete collar integrity on every Parkway repair where misalignment is present, because we know what the clay does.
The housing stock adds a second layer. Parkway’s tract homes from the 1980s through 2000s include a lot of wood-framed side-yard gates, and many of the communities are HOA-governed. That means the gate style, the finish, even the hardware type often has to match what the CC&Rs specify. We’re used to that. We show up knowing the gate has to look right, not just work right, and we carry finishes that match what Parkway HOAs typically require.
Our Main Parkway Services
Most Parkway homeowners call us for one of three things: a gate that won’t close or latch, a gate that needs to be replaced entirely, or an electric operator that’s stopped responding. Each of those has its own dedicated Parkway page below.
Gate Repair in Parkway
A leaning wood gate on Parkway clay usually means the post has moved, not just the hinges. We re-set posts in deeper footings where the soil has pushed them out, then re-hang the gate so it swings clean and latches without having to lift it. We work on Viking and Linear hardware frequently in this area, and we stock common replacement parts so we’re not ordering and waiting. Full details are on the Gate Repair in Parkway page, including what we check before we tell you a price.
Gate Installation in Parkway
A new gate in Parkway needs a footing that can outlast the clay. That means a bell-bottom pier or a deeper set than what many original tract builders used, and we pour it that way from the start. We build wood gates that match the neighborhood’s existing look, and we work within HOA requirements rather than fighting them. The full scope, including how we handle the old gate removal and the clean-up, is on the Gate Installation in Parkway page.
Electric Gate Repair in Parkway
When a driveway gate operator stops responding in Parkway, the problem is often the thermal expansion that comes with summer heat above 100°F followed by cool, wet winters. Limit switches drift, circuit boards overheat, and older Viking or LiftMaster operators that have been running for a decade can fail without warning. We carry factory-trained knowledge on those brands and several others. Our electric gate work in Parkway is covered step by step on the Electric Gate Repair in Parkway page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Parkway
We’re factory-trained on the operators and openers Parkway homes actually run: FAAC, BFT, Linear, and Viking among others. We keep common boards, remotes, and safety-edge parts stocked locally, which means most electric gate repairs in Parkway don’t wait on a ground shipment. See the full list on our brands page.
Pricing for Gate Company in Parkway, CA
| Service | Typical range in Parkway |
|---|---|
| Gate post re-setting with deeper concrete collar | $325 - $620 |
| Wood gate re-hang and latch alignment | $165 - $310 |
| Full wood gate replacement (side-yard, 4-6 ft) | $630 - $1,180 |
| Driveway gate operator replacement (Viking, FAAC, or BFT) | $850 - $1,900 |
| Hinges and hardware replacement (iron or stainless) | $110 - $270 |
| Sag cable and turnbuckle kit installed | $150 - $275 |
| Electric gate safety-edge replacement | $180 - $390 |
| Operator limit switch adjustment | $130 - $230 |
What pushes a Parkway quote higher is usually the soil condition: if the post has moved more than a couple inches and the old concrete collar is cracked, the fix is a re-set, not a hardware swap. And if an HOA requires a specific stain or finish, that adds matching time. Whatever the number is, you’ll see it in writing before we touch anything, and the price we quote is the price you pay.
Neighborhoods We Serve in Parkway
We work throughout Parkway and the surrounding Sacramento County CDP area. Most of our calls come from the tract-home communities and the HOA-governed sections, but we take on gates of every size and style here.
- Parkway core residential area
- HOA-governed communities with automated vehicle gates
- Side-yard and pedestrian-access gates throughout the CDP
- Adjacent unincorporated Sacramento County streets
For most Parkway jobs we can be on-site the same day you call, or we’ll schedule a specific window that works around nap time, school pickup, or whenever the house is quiet.
Service Area – Cities Near Parkway
While this page focuses on Parkway, our crews also serve nearby areas across the region. You can find local detail for other cities we cover: Los Angeles, CA, San Diego, CA, San Jose, CA, and San Francisco, CA. Dispatch and scheduling are coordinated from our Sacramento office, and crews serve Parkway locally.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Parkway
Most Parkway calls get a same-day visit when you call before early afternoon. We answer the phone live around the clock, so you’ll speak to a person and get a straight answer on timing, not a callback queue.
Often yes. If your community has architectural guidelines, a gate replacement or a finish change may need approval. Repairs that restore the gate to its original look usually don’t. We can match the existing style and finish so approval is straightforward.
We dig out the old footing, set the post deeper with a bell-bottom pier where the soil conditions call for it, and re-hang the gate. That’s the only fix that holds through more than one rainy season on Parkway’s shrink-swell clay. Call (626) 649-4572 and we’ll take a look and give you a written price.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Parkway Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon