Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Parker, TX
Parker, TX isn’t like most Collin County suburbs. The city’s one-acre minimum lot ordinance has kept it an equestrian estate community, which means nearly every home sits behind a wide driveway gate – often 14 to 16 feet across, built to clear horse trailers, and mounted on heavy posts sunk into expansive clay soil. That combination creates repair work you simply don’t see in tighter subdivisions. If your gate is sagging, dragging, or failing to open, call (626) 649-4572 and we’ll give you a straight answer on what’s wrong.
Why Parker Homes Are Different
Most Parker properties are custom-built estate homes on acre-plus lots, and the gates reflect that scale. A standard suburban gate opener assembly rarely fits a 16-foot ornamental iron gate hung on a masonry post. The hardware has to be matched to the actual weight and swing of the gate, not guessed from a catalog. Then there’s the soil. Parker sits on the same Blackland Prairie clay found across eastern Collin County, and that clay does two things: it swells after rain and shrinks in summer drought. The result is posts that heave, lean, and fall out of plumb on a predictable seasonal rhythm. A gate that swung cleanly in March may scrape the ground by August, not because the hinges wore out, but because the post moved underneath them.
We also see a lot of solar-powered operators out here. Running conduit down a 300-foot driveway is expensive, so many Parker homeowners chose solar panels and battery banks instead. The North Texas sun loads those systems hard, and dust from unpaved easements coats the vents and panels. By late summer, battery failures and clogged operators become a routine call pattern across Parker. Cody Beckman, who leads our gate work, has learned to check the battery health and panel cleanliness on every solar call here, because that’s usually the difference between a one-visit fix and a callback.
Our Main Parker Services
Most calls from Parker fall into three groups: a gate that won’t open or close reliably, a new gate project for a property being built or renovated, and electrical problems with the operator, keypad, or sensors. Each has its own page with more detail.
Gate Repair in Parker
Sagging gates, broken hinges, failed latches, posts that have shifted out of alignment – these are the repairs we handle most often in Parker. The clay soil here means a leaning post is rarely a one-time fix; the foundation usually needs attention or the problem comes back after the next wet season. We assess the full swing path, check the post foundations, and give you a written price before any work starts. You’ll find specifics on our Gate Repair in Parker page, including the common failure points we see on Parker’s oversized estate gates. We lay drop cloths and wear shoe covers whenever we step inside your home or garage to access an operator or keypad, and a cleanup photo is part of every visit.
Gate Installation in Parker
New gates in Parker usually mean a custom-sized opening, not a stock 10-foot panel. Horse trailers, tractors, and farm trucks need clearance that standard residential hardware often can’t support. We measure carefully, match the operator to the gate’s true weight, and account for the post foundations before the first hole is dug. Whether you’re replacing a damaged gate or adding one to a new build, the conversation starts with measurements and a written quote. See our Gate Installation in Parker page for what a full installation includes and how we handle long driveways without trenching where solar is the better fit.
Electric Gate Repair in Parker
Electric gate operators, keypads, sensors, and solar battery systems need diagnosis more than guesswork. In Parker, the dust and sun exposure make panel and vent maintenance a recurring need, and the wide gates stress motors that were undersized from the start. We work on FAAC, BFT, Linear, and Viking operators among others, and we’ll tell you plainly if a repair is worth doing or if replacement saves you money over two years. Details and pricing are on our Electric Gate Repair in Parker page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Parker
We’re factory-trained on the operators Parker homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common replacement parts for FAAC and Linear units are stocked in our service vehicles, which means many Parker repairs finish the same day. See our brands for the full list.
Pricing for Gate Company in Parker, TX
Prices in Parker run higher than in denser suburbs because the gates are bigger, the posts are heavier, and custom adaptation is often needed. The table below gives you realistic ranges for common jobs. Every job gets a written quote before work begins, so the number you agree to is the number you pay.
| Service | Typical range in Parker |
|---|---|
| Gate latch or hinge replacement | $180 – $360 |
| Gate post straightening or reset | $400 – $900 |
| Automatic gate operator replacement | $850 – $1,800 |
| Solar panel and battery replacement | $250 – $600 |
| Keypad or sensor repair | $150 – $320 |
| Full gate installation (single swing) | $2,500 – $6,500 |
| Full gate installation (double swing, 14-16 ft) | $4,000 – $9,000 |
| Electric gate troubleshooting and diagnosis | $95 – $180 |
What pushes a Parker quote higher is usually post foundation work – clay soil movement means a leaning post often needs a deeper concrete footing – and the custom hardware required for an oversized gate. We’ll show you line items on the written quote so you can see exactly where the money goes.
Neighborhoods We Serve in Parker
Our service area covers all of Parker and the surrounding Collin County estate corridors. We’re out here every week, so scheduling is straightforward and response is typically same-day or next-day depending on the season.
- Whispering Hills
- Parker Ranch Estates
- Quail Creek Estates
- Spring Creek Estates
- Country Club Estates
Service Area – Cities Near Parker
While this page focuses on Parker, our teams also cover surrounding communities across the metro. If you’re in Dallas, TX, Fort Worth, TX, or Houston, TX, we can help there too. And for our Florida readers, we serve San Antonio, FL as well.
Serving Parker, TX - Our Local Coverage Area
We’re based in the Parker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Parker
Most Parker calls get a same-day or next-day response. We schedule around your availability, and a live person answers the phone 24/7 to book the visit. Call (626) 649-4572 and you’ll speak to someone, not a voicemail.
Parker’s HOA presence varies by neighborhood, and some estate communities have design standards for gate style and height. We’ll help you check what applies to your property before installation. For repairs, permits are rarely needed, but we’ll flag any issue on the first visit.
Yes. Our technicians ask before opening any gate or entering any fenced area, and we’ll schedule around feeding times or quiet hours if that helps. We keep tools and vehicles clear of pasture areas and close every gate behind us the way we found it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Parker Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon