Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Orinda, CA
Gate work in Orinda looks different than it does anywhere else in the East Bay. The hillside estate lots, the steep driveways, and the inland heat all put real stress on driveway gates, and most of the calls we get here involve aging operators that simply were not built for this climate. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on one thing: gates that open, close, and hold up in Orinda’s specific conditions. Call (626) 649-4572 and a live person answers, any hour.
Why Orinda Homes Are Different
Orinda sits east of the Caldecott Tunnel, past the marine layer that keeps Berkeley and Oakland mild. Summers here regularly reach 95 to 105°F, and winters turn cool and damp. That thermal cycling warps steel gate frames over time, degrades the rubber seals inside operators, and accelerates rust on hinges and springs. A gate that would last 20 years in Oakland often needs real attention at 12 or 15 years in Orinda.
The housing stock compounds the problem. Most Orinda homes are custom ranch houses, split-levels, or estate properties built from the 1960s through the 1990s on steep hillside lots, nearly all of them approached by long, winding private driveways. That means the automated wrought iron or tubular steel gates we service are not decorative. They’re the working front door to the property, and many of them are still running 1980s or 1990s-era swing and slide operators that have outlived their rated service life. Add the cross-slope grade that is so common in the Lamorinda hills, and you get rollers, track wheels, and hinge pins that load unevenly and wear out of square. Misalignment failures that a flatland technician rarely sees are routine here.
Our Main Orinda Services
Most Orinda homeowners call us for one of two reasons: a gate that has stopped working, or a gate that needs to be replaced or added. Here’s what each looks like in this city.
Gate Repair in Orinda
Repair calls in Orinda usually start with a gate that will not open, drags against the ground, or has come off its track entirely. On hillside lots, we see cross-slope installations where the rollers and track wheels have been carrying uneven load for years, and the hardware finally gives out. We service swing and slide gates, replace hinges, latches, posts, and springs, and we do it with the Cedarwell Care Promise: a written price before any work starts, shoe covers and drop cloths inside the home, and a photo of the cleanup when we leave. Details are on the Gate Repair in Orinda page.
Gate Installation in Orinda
New gate installations in Orinda have to account for the grade, the driveway’s curve, and the fire-access rules that govern nearly every hillside property here. When we install a wrought iron or steel driveway gate, we measure for the cross-slope and set the posts, hinges, and track so the gate swings or slides true from day one. It is scheduled, measured work, not a same-day job. You get a free measure and a written price before you commit. The full scope is on the Gate Installation in Orinda page.
Electric Gate Repair in Orinda
Electric gate problems in Orinda often trace back to the operator: an older LiftMaster, FAAC, Viking, or DoorKing unit that has baked through summer after summer of inland heat. We diagnose the operator, the safety sensors, the keypad, and the wiring, and we program the controls on site. Orinda’s fire-access requirements also mean the open-on-power-loss and Knox box settings matter more here than they do in flatland cities. The step-by-step process and what we check is on the Electric Gate Repair in Orinda page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Orinda
Our technicians are factory-trained on the brands Orinda homeowners actually have: Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We carry common parts in our local service vehicles, which shortens most repair turnarounds. See our brands for the full list.
Pricing for Gate Company in Orinda, CA
| Service | Typical range in Orinda |
|---|---|
| Gate safety inspection | $95-$150 |
| Hinge replacement (standard swing gate) | $180-$340 |
| Latch or lock replacement | $120-$260 |
| Track wheel or roller replacement | $140-$300 |
| Gate post reset or reinforcement | $350-$700 |
| Operator replacement (single swing) | $650-$1,450 |
| Keypad or intercom install | $300-$850 |
| Safety sensor repair or replacement | $150-$350 |
| Wrought iron gate fabrication and install | $2,500-$8,000+ |
| Automation retrofit (existing gate) | $1,500-$4,500 |
What pushes a price up in Orinda is usually the grade: a post reset on a cross-slope hillside takes longer and needs more concrete than a flat-lot job in Walnut Creek. Whatever the number, you will see it in writing before we touch anything. No surprises, no upsell pressure.
Neighborhoods We Serve in Orinda
We work throughout Orinda, from Sleepy Hollow to the estates above Miner Road, and out toward Glorietta and the hills behind Orinda Country Club. Our typical response for a repair call in Orinda is under two hours, depending on the time of day and weather.
- Sleepy Hollow
- Glorietta
- Orinda Downs
- Charles Hill
- El Toyonal
Service Area – Cities Near Orinda
Our Orinda crews also cover the surrounding Lamorinda and East Bay communities. If you are a few minutes over the hill or down the highway, we can still help.
We serve Lafayette, CA, Moraga, CA, Piedmont, CA, and Walnut Creek, CA. Dispatch and scheduling for the area are coordinated from our San Francisco Bay Area office.
Serving Orinda, CA - Our Local Coverage Area
We’re based in the Orinda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Orinda
Most Orinda repair calls get a technician on site within two hours. We answer the phone live 24/7, so you’ll speak to a person immediately, not a voicemail queue. For a gate that won’t close and leaves your property open, call (626) 649-4572 and we’ll move fast.
Many Orinda gate installations do require a permit, especially on hillside lots and any property inside the fire hazard zone. The city’s planning department reviews gate height, setback, and fire-access clearance. We can walk you through what applies to your property before any work begins.
Yes. Tell us when quiet matters, and we’ll schedule accordingly. Our technicians use quiet tools when kids are asleep, and we choose pet-safe lubricants where there’s a choice. We’ll also confirm with you before we touch anything on the property.
If your gate needs attention in Orinda, call (626) 649-4572 for a free estimate, a straight answer on price, and a technician who knocks before touching anything.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orinda Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs