Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Ontario, CA
Gate repair in Ontario means working on equipment that has survived 105°F summers, Santa Ana wind gusts through the Cajon Pass, and for many homes, 20 to 30 years of daily open-and-close cycles. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on one thing: gates that latch properly and posts that hold square. Whether it’s a bent steel swing gate on a 1990s tract home or a slide gate knocked off its track during the last wind event, you’ll get a written price before we start and a call answered by a live person at (626) 649-4572.
Why Ontario Homes Are Different
Ontario’s housing stock runs from craftsman-era homes near the historic downtown grid to large suburban tracts built in the 1990s and 2000s on the north and east sides. A lot of those newer homes sit inside HOA communities where automated entry gates and driveway gates are now hitting two to three decades old. That’s the age when operators burn out, hinges sag, and hardware that worked fine for years suddenly doesn’t.
Block-wall perimeter fencing paired with wrought iron or steel swing and slide gates is the dominant setup across the city. Steel expands noticeably when summer temperatures climb past 105°F, and we regularly see gates that bind against their posts in August but swing fine in January. Then there’s the wind: Ontario sits directly in the Santa Ana corridor funneled through the Cajon Pass, where gusts over 60 mph rip slide gates off their tracks and strain welds. Homes shielded from the pass in neighboring cities don’t see this nearly as often.
Our Main Ontario Services
The three calls we get most from Ontario homeowners are for gates that won’t latch, gates that need full replacement, and electric operators that stopped responding. Each has its own dedicated Ontario page below.
Gate Repair in Ontario
Most Ontario gate repairs come down to a latch, a hinge, or a track. The steel frames common here hold up well, but the hardware takes a beating from heat expansion and wind load. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, so the right part goes in on the first visit rather than after a guess. See the full breakdown on our Gate Repair in Ontario page.
Gate Installation in Ontario
A new gate in Ontario needs to be spec’d for the environment, not just the opening. We account for the swing clearance on block walls, the weight the posts will carry in high wind, and operator sizing for gates that get used dozens of times a day. Whether it’s a steel driveway swing gate or a replacement for an HOA entry, we measure, quote, and build it to hold square through Santa Ana season. Details live on our Gate Installation in Ontario page.
Electric Gate Repair in Ontario
Electric gate operators in Ontario fail in predictable patterns: circuit boards that overheat, limit switches that drift, and arms that strip gears when wind pushes against the gate mid-cycle. We’re factory-trained on the brands families actually own across Ontario, and we stock common boards, remotes, and safety sensors locally so most calls become one-visit fixes. Read more on our Electric Gate Repair in Ontario page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Ontario
We’re factory-trained on FAAC, BFT, and Linear equipment, plus the rest of the common residential brands Ontario homeowners rely on: LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Keeping common parts stocked locally means most electric gate repairs don’t wait on a shipped component. See our brands for the full list.
Pricing for Gate Company in Ontario, CA
| Service | Typical range in Ontario |
|---|---|
| Gate latch replacement | $145 - $310 |
| Hinge replacement (steel or iron) | $180 - $390 |
| Sagging gate alignment | $165 - $340 |
| Gate wheel or roller replacement | $120 - $280 |
| Post repair or reset | $225 - $540 |
| Slide gate track repair | $210 - $495 |
| Operator control board replacement | $290 - $580 |
| Electric safety sensor replacement | $165 - $350 |
| Complete gate installation (residential) | $2,400 - $8,500 |
Wind damage pushes prices higher in Ontario more than anywhere else around: a gate pulled off its track often bends the track itself, so the repair includes straightening or replacing the rail, not just resetting the gate. You’ll see the exact number in writing before we touch anything. No surprises, no pressure.
Neighborhoods We Serve in Ontario
We serve all of Ontario, from the older grids near downtown to the newer HOA tracts on the north and east sides. Our technicians are local to the area, so response times stay short without routing anyone in from across the county.
- North Ontario
- South Ontario
- Ontario Ranch
- Archibald Ranch
- Creekside
Service Area – Cities Near Ontario
Our Ontario crews also serve the surrounding communities. If you’re just over the city line, we’ve got you covered in Montclair, CA, Claremont, CA, Upland, CA, and Rancho Cucamonga, CA.
Serving Ontario, CA - Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ontario
We answer every call with a live person, 24 hours a day, and our Ontario technicians typically arrive same-day or next-day for most residential repairs. Wind-storm damage during Santa Ana events creates a spike in calls, but we prioritize gates that won’t close, since an open gate leaves kids and pets at risk near the street. Call (626) 649-4572 and we’ll give you a straight answer on timing.
Many Ontario communities, especially the 1990s and 2000s HOA tracts on the north side, have architectural guidelines covering gate style, height, and finish. We recommend checking your HOA’s CC&Rs before installation. We’re happy to provide drawings and material specs if your HOA requires them for approval, and we’ll match the existing community style so the gate doesn’t stand out.
Yes. We use quiet, battery-powered tools where possible, and we can schedule the visit around nap time if that matters to you. We wear shoe covers and lay down drop cloths before stepping inside the home, and we choose pet-safe lubricants where there’s a choice. Tell us what the family’s routine is when you call, and we’ll plan around it.
If your gate is sagging, stuck, or the operator’s gone silent, call us at (626) 649-4572. You’ll get a live person, a written price before any work starts, and a gate that latches and holds square when we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ontario Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide