Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Miami Shores, FL
Latch & Post is a Miami Shores gate company focused on three things: gate repair, gate installation, and electric gate repair. Most of our work here involves Mediterranean Revival and MiMo homes built between 1935 and 1960, which means we spend a lot of time matching period ironwork, working around non-standard masonry pillars, and dealing with salt air corrosion from Biscayne Bay. Call (626) 649-4572 and a live person answers, any hour.
Why Miami Shores Homes Are Different
Miami Shores has something few neighboring cities do: an Architectural Review Board with actual authority. Any gate modification or replacement visible from the street needs ARB approval before installation. That changes how we work. When a 70-year-old wrought-iron driveway gate is rusted through, we don’t just swap it for whatever fits. We photograph the original, review the ARB form with you, and frame the job as a matching restoration so the village sees like-for-like, not a new installation. Skip that step and you can get a stop-work notice.
The housing stock compounds it. Homes along Northeast 96th through 102nd Streets and the winding roads near the Miami Shores Country Club were built when gates were hand-forged and pillars were poured at non-standard widths. Retrofit a modern opener onto pillar that’s 14 inches wide instead of 16, and you need custom brackets and patient alignment. Then there’s the salt. The village’s eastern edge sits against Biscayne Bay, and the Atlantic wind carries salt across the neighborhood daily. We see hinge pins corroded into their sockets and operator arms with the zinc coating gone. Miami-Dade’s High Velocity Hurricane Zone code also dictates which replacement panels and operators are even legal here. This is not a generic gate market.
Our Main Miami Shores Services
The two calls we get most in Miami Shores are for sagging or corroded gates that won’t latch, and for electric operators that stopped responding. Here’s what each involves.
Gate Repair in Miami Shores
Most repairs here trace back to salt air. Hinges seize, latch brackets snap, and posts shift in the sandy soil after heavy rain. A gate that won’t close isn’t just annoying, it leaves a yard open to the street. We inspect the full swing path, identify whether the post or the hardware is failing, and quote the exact fix before any work starts. If your ornamental iron gate has a crack near a weld point, we address that too. See Gate Repair in Miami Shores for specifics.
Gate Installation in Miami Shores
Installation in Miami Shores almost always means ARB paperwork. Whether you’re replacing a rotted wooden side gate or adding a new driveway entry, the village wants to see what’s visible from the street. We help you document the existing gate, select a panel that matches the architectural character, and confirm HVHZ wind-load approval before ordering anything. The install itself includes setting posts properly and verifying the swing clear of the sidewalk. Details are on Gate Installation in Miami Shores.
Electric Gate Repair in Miami Shores
Openers fail here for two reasons: corrosion on the control board terminals and misaligned safety sensors. Salt air gets into the enclosure, and the constant humidity of a Miami Shores summer doesn’t help. We carry boards and sensors for Viking, Ghost Controls, DoorKing, and Elite, so the first visit usually ends with the gate working again. We test the auto-reverse and photo eyes before we leave, because a gate that closes on a car or a kid is not acceptable. Read more at Electric Gate Repair in Miami Shores.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Miami Shores
We’re factory-trained on the brands Miami Shores homes actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for Viking, Ghost Controls, DoorKing, and Elite are stocked in our South Florida van inventory, which means most repairs finish same-visit. See all our brands.
Pricing for Gate Company in Miami Shores, FL
Every price below is an honest range for this market. You’ll see your exact number in writing before we touch a thing.
| Service | Typical range in Miami Shores |
|---|---|
| Gate latch replacement (standard) | $120 – $250 |
| Wrought-iron gate repair (weld + repaint section) | $180 – $420 |
| Post repair / re-anchoring | $250 – $550 |
| Operator control board replacement | $280 – $520 |
| Safety sensor replacement (pair) | $120 – $210 |
| Hinge replacement (pair, welded) | $160 – $320 |
| Full driveway gate installation | $2,800 – $6,500 |
| Electric opener installation | $950 – $2,100 |
| ARB compliance documentation | $150 – $350 |
| Service call + diagnostic | $85 – $125 |
What pushes a Miami Shores quote higher is ARB paperwork, custom bracket fabrication for non-standard pillars, and HVHZ-compliant panels. The price is quoted and agreed before any work begins, so there’s no invoice surprise at the end.
Neighborhoods We Serve in Miami Shores
We work across the whole village, from the streets off Biscayne Boulevard to the quieter blocks near the bay. Typical response time for a Miami Shores visit is within one business day.
- Downtown Miami Shores
- Miami Shores Country Club area
- Bayfront / NE 96th Street corridor
- Griffing Park area
- Northeast 102nd Street blocks
Service Area – Cities Near Miami Shores
While our crews are based in the Miami South Florida metro, we serve homeowners throughout the region. If you’re in a neighboring city, see Miami, FL, Jacksonville, FL, Tampa, FL, or Orlando, FL for local details.
Serving Miami Shores, FL - Our Local Coverage Area
We’re based in the Miami Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miami Shores
Repairs that keep the gate’s original appearance typically do not require ARB review. If the repair turns into a replacement or changes what’s visible from the street, the village wants an application on file first. We help with photos and paperwork so the work isn’t delayed.
For a gate that won’t close or an opener that’s dead, we often can. Call (626) 649-4572 and a live person will tell you exactly when a technician can be at your Miami Shores home, not a call center script.
We prepare the documentation: photos of the existing gate, a description of the replacement, and the relevant form. You submit it since it’s your property, but we walk you through each field. It’s covered in the compliance line item you’ll see on your written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miami Shores Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs