Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Kyle, TX
Kyle, TX is a city where nearly every home was built after 2005, and most sit inside HOA-governed master-planned communities like Plum Creek, 6 Creeks, Crosswinds, and Anthem. That means the gates here are younger than in Buda or San Marcos, but they’re also hitting their first major repair cycle all at once. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on one thing: gates. If your driveway gate sags, your subdivision entrance gate won’t close, or your opener stopped responding, call Gate Repair in Kyle at (626) 649-4572 for a written price before any work begins.
Why Kyle Homes Are Different
Kyle sits on the Blackland Prairie, and the clay soil here is some of the most expansive in Texas. It swells after wet winters and cracks during summer drought. That movement doesn’t just crack driveways. It heaves concrete-set gate posts, tilts ornamental iron gates out of square, and throws automated gate arms out of alignment. A gate that closed perfectly in January can drag across the ground by June. In Kyle, post-reset and realignment work is the single most common repair call we handle, far more than in cities with sandier or rockier ground.
Because so many Kyle neighborhoods were built within a 15-year window, the gate hardware across entire subdivisions ages at the same pace. After a wet winter followed by a dry spring, we routinely see call spikes across a dozen streets in the same community at the same time. The same clay-heave cycle that shifts one entrance gate shifts the one three streets over. We schedule by community when that happens. It’s faster for you and more efficient for us. Most Kyle homes use ornamental iron or steel swing or slide gates with automated operators, so our trucks carry parts for the brands those builders specified: LiftMaster, FAAC, BFT, Linear, and Viking, plus others you’ll find on our brands page. Very little pre-2000 housing stock exists here, which means we rarely see rotted wood gates or stretched chain-link. We see electronics, hinges, and alignment problems instead.
Our Main Kyle Services
Kyle homeowners call us most often for two things: a gate that won’t open or close properly, and a gate that needs to be put in for the first time. Each of these has its own dedicated page with pricing and local detail.
Gate Repair in Kyle
A sagging iron gate in Plum Creek or 6 Creeks is usually a hinge and post problem, and in Kyle the post movement is nearly always tied to clay soil expansion and contraction. We reset posts, replace hinges, straighten frames, and get the gate swinging true again. We carry replacement parts for the common builder-installed hardware, so most repairs happen in one visit. Every repair includes shoe covers and drop cloths if we step inside your garage or home, plus a photo of the cleanup before we leave. For details on what a repair costs and how quickly we can get to your street, see Gate Repair in Kyle.

Gate Installation in Kyle
New construction in Kyle often skips the driveway gate, so many homeowners add one after moving in. HOA rules matter here. Most Kyle communities require architectural review before a gate goes in, and we’re familiar with the submission process for the major communities. We install ornamental iron and steel swing and slide gates sized for Kyle’s wider driveway setbacks, and we set posts deep enough to ride out the clay movement. You get a written price before any materials are ordered. See Gate Installation in Kyle for the full walkthrough.

Electric Gate Repair in Kyle
Automated entrance gates are everywhere in Kyle, and the operators that run them age faster in Texas heat. When a gate stops responding to the remote, clicks without moving, or reverses halfway, the cause is usually the operator, the safety sensors, or the wiring, sometimes all three. We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. If the gate is too hot to touch or the arm is under tension, don’t force it. We’ll check the limit settings, sensor alignment, and battery backup on the first visit. More on this at Electric Gate Repair in Kyle.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kyle
We’re factory-trained on the operators and hardware that Kyle builders and homeowners actually use. Linear, Viking, Ghost Controls, and DoorKing are common here, along with LiftMaster and FAAC. We keep the most frequently replaced parts in the truck, so most Kyle repair visits are finished the same day. See the full list on our brands page.
Pricing for Gate Company in Kyle, TX
These are typical price ranges for common gate jobs in Kyle, based on what we see across the city’s HOA communities and single-family properties. Your written quote will reflect your exact gate, hardware, and condition.
| Service | Typical range in Kyle |
|---|---|
| Gate post reset (concrete-set, clay-heaved) | $280-$520 |
| Gate hinge replacement (ornamental iron) | $120-$260 |
| Gate realignment / sag correction | $140-$300 |
| Latch replacement (standard residential) | $95-$210 |
| Gate opener motor replacement | $380-$740 |
| Safety sensor alignment or replacement | $110-$240 |
| Wiring repair or replacement (short run) | $160-$340 |
| Battery backup replacement | $90-$190 |
| Gate installation (single ornamental iron driveway) | $1,800-$4,200 |
| Electric gate opener installation (single swing) | $1,400-$2,800 |
In Kyle specifically, the main price driver is clay-related post movement. A gate that needs realignment because the post has shifted is a straightforward fix, but if the post itself has heaved enough to require digging and re-pouring, the cost moves toward the upper end of the range. Either way, you’ll see the exact number in writing and approved before we touch anything. No work starts without it.
Neighborhoods We Serve in Kyle
We work across Kyle’s HOA communities and older pockets daily. Most calls come from the newer master-planned areas, but we regularly serve the streets around the original town center too. Typical response time is same-day or next-day for most non-installation work.
- Plum Creek
- 6 Creeks
- Crosswinds
- Anthem
- Waterleaf
Service Area – Cities Near Kyle
Our Kyle crews also cover the surrounding area when scheduling allows. If you’re just outside the city line, we may already be working a few streets away. We also serve Buda, TX, San Marcos, TX, Dripping Springs, TX, and Austin, TX. Call (626) 649-4572 and we’ll tell you when we can be there.
Serving Kyle, TX - Our Local Coverage Area
We’re based in the Kyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kyle
Most repair calls in Kyle are answered same-day or next-day, depending on how many streets in your community are already on the schedule. During peak clay-heave season, when multiple gates in one neighborhood shift at once, we batch visits by community so you wait less. Call (626) 649-4572 and you’ll get a live person and a straight answer.
For repairs to existing gates, no. For new gate installation or changing the style or color of a gate, most Kyle HOAs require architectural review first. We know the submission process for the major communities and can tell you what’s needed before you start. We’ll help you prepare the paperwork but we don’t submit it for you.
No. Kyle is inside our regular service area. The written price you get before work begins is the price you pay. No travel surcharges, no fuel fees, no surprises on the invoice. The quote always includes shoe covers, drop cloths, and the cleanup photo, and it always comes before we start.
Need a gate looked at in Kyle? Call Latch & Post Gate Repair at (626) 649-4572 for a free estimate. A live person answers, and you’ll get a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kyle Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick





Before
After
Before
After
Before
After