Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Wrightwood
Most gate repairs in Wrightwood come down to two things: the freeze-thaw cycle heaving posts out of square, or an operator that sat dead through months of snow while the cabin was empty. We fix both, and we do it with a written price before any work starts. Latch & Post Gate Repair is part of the Cedarwell family and has been operating since 2009, with background-checked technicians who arrive in uniform, lay drop cloths inside the home, and put on shoe covers before taking a single step on your floors. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Wrightwood’s Preferred Gate Repair Company
Wrightwood homeowners call us after discovering a gate that worked in October is racked and jammed by January. That specific failure, post footings heaving as soil freezes and thaws at 6,000 feet, is something we see every winter along Lone Pine Canyon Road, Heath Creek, and the cabins tucked below Mountain High. Cody Beckman leads our team, and he insists on the Cedarwell C.A.R.E. values on every visit: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. We stock parts for Linear, Viking, Ghost Controls, and DoorKing operators locally, which means fewer return trips and faster turnaround for Wrightwood customers.
Gate Repair here is different from the valley cities. A gate in Rancho Cucamonga wears from daily use. A gate in Wrightwood wears from neglect, snow load, and ice. We schedule around your winter visits, not the other way around, and we can plan quiet-hour work if kids or pets are in the house.
Iron Gate Repair in Wrightwood
Iron gate repair in Wrightwood usually means correcting what snow and freeze cycles have done to a steel frame. We re-square panels, replace sheared hinge bolts, rebuild posts that have heaved, and weld cracked joints before they become structural failures. A basic iron gate realignment in Wrightwood runs $225 to $475, while post resetting and full frame straightening typically lands between $600 and $1,400 depending on footing depth and how far the post has shifted.
Post Reset and Frame Square
When the ground freezes, wet soil expands and lifts the footing. When it thaws, the post settles nowhere near plumb. We excavate around the footing, reset the post in fresh concrete, stake it for 48 hours so it cures level, then remount the gate panel. No point welding a cracked frame to a post that’s still moving.
Hinge and Latch Replacement
Older Wrightwood iron gates often hang on barrel hinges that have never been greased. Rust seizes them, and then the latch stops aligning. We replace them with sealed bearing hinges where possible and recut the latch strike so the panel closes without lifting. Most hinge and latch work on iron gates here costs $180 to $320.
Sliding Gate Repair in Wrightwood
Sliding gate repair in Wrightwood is often a freeze-plug problem before it’s a motor problem. Jeffrey and ponderosa pine needles pack into the track all summer and fall, then the first heavy snow freezes that debris solid. The motor stalls, strips the drive gear, and by the time you arrive for ski season the gate won’t budge. Clearing the track, replacing the drive gear, and adjusting the limit switches on a Wrightwood slide gate typically runs $325 to $600. Full operator replacement with a new control board and remote starts at $850 to $1,300.
Track and Wheel Work
Slide gates ride on steel wheels inside a track that accumulates pine tar, sap, needles, and ice melt. We pull the panel, clean or replace the wheels, and shim the track so the panel rolls true. If your gate grinds or shudders halfway through its travel, this is usually the fix before the motor burns out.
Operator and Safety Edge
Many Wrightwood slide gates have operators installed a decade or more ago, before current safety standards. We replace obsolete control boards, install new photo eyes and reversing edges, and configure the force settings so the gate stops instead of crushing anything in its path. This is the work that keeps kids, dogs, and cars safe.
Trusted Brands We Service in Wrightwood
We’re factory-trained on the brands families actually own up here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Wrightwood customers, that matters because a Ghost Controls swing arm installed on a cabin off Swarthout Canyon Road has different cold-weather needs than the same unit in Upland. We stock common Linear and DoorKing boards, remotes, and safety edges locally, so a January repair doesn’t mean waiting a week for a part from a warehouse.
Common Gate Repair Problems We See in Wrightwood Homes
- Heaved post footings. The October-to-April freeze-thaw cycle lifts post footings and pushes gate frames out of square. A gate that closed cleanly in fall can bind against the post by your first winter visit.
- Pine-debris freeze plugs. Needles and sap pack into slide tracks and chain drives over summer and fall. The first heavy snow freezes that debris into a solid plug that stalls motors and strips gears.
- Obsolete control boards. Ice melt refreezes inside operator housings on 1950s to 1970s cabins, corroding boards on legacy operators. The gate dies while the cabin sits empty, and you don’t know until you arrive months later.
- Snow-load bowing on wood gates. Accumulated snow bends wooden gate frames and shears hinge bolts. Many of the rustic wood gates in this ZIP code were never built for a 60-inch snow year.
Pricing for Gate Repair in Wrightwood, CA
Gate repair pricing in Wrightwood is straightforward, and you’ll always see the exact number in writing before we touch anything. A standard latch or hinge replacement runs $180 to $320. Gate realignment and post reset typically lands between $225 and $1,400 depending on footing work. Black iron gate repair for a seasonal cabin gate, including weld and rust remediation, usually runs $75 to $300. New operators and control boards start at $850 to $1,800 installed. Call (626) 649-4572 for a free estimate, no obligation, no pressure.
We Also Serve Cities Near Wrightwood
Our Gate Repair in Wrightwood coverage extends down the mountain to Phelan, Victorville, Upland, and Rancho Cucamonga. If you split time between a cabin here and a place below the snow line, we can schedule work in either location.
Serving Wrightwood, CA - Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Wrightwood
Sometimes, but the panel is rarely the root cause. In Wrightwood, sagging usually means the hinge post has heaved out of plumb, or the wood frame has bowed under snow load. We’ll reset the post, replace sheared hinge bolts, and then assess whether the panel itself is salvageable. If the panel is straight but the post is moving, a panel-only fix will fail again next winter. Call (626) 649-4572 and we’ll tell you honestly which route is cheaper long-term.
Yes, and usually it’s ice melt refreezing in the motor housing or a control board that’s corroded from the freeze-thaw cycle. The cold itself doesn’t usually kill the motor, the moisture from snow melt does. We fix the operator and can fit a solar gate opener override so a dead battery or frozen board doesn’t lock you out. The exact fix depends on the operator, and we’ll quote it before any work starts.
Yes, in most cases. Gates hung before current standards often lack photo eyes, reversing edges, or proper force settings. We can add safety edges, photo eyes, and update the control board on most legacy swing and slide gates without replacing the entire setup. If the operator is obsolete and the retrofit parts cost more than a new unit, we’ll tell you that plainly instead of patching old hardware.
Yes. Solar gate openers are a common choice for Wrightwood cabins that sit empty for months, and we service Ghost Controls, Mighty Mule, and other solar-compatible units. The main winter issue is snow covering the solar panel and the battery depleting in freezing conditions. We angle panels for maximum winter sun and can add a trickle-charge option. Call (626) 649-4572 and we’ll walk you through what your setup needs.
Clear the track of pine needles and sap before the first heavy snow, and don’t leave snow piled against the gate panel. Once debris freezes solid, the motor will stall and strip the drive gear before it pushes through. We also recommend a fall track service visit, which runs about $95 to $150 and includes clearing, wheel inspection, and limit adjustment so your gate survives the season.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Wrightwood since 2009.





Before
After
Before
After
Before
After