Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Wellington
Gate repair in Wellington usually costs between $180 and $2,400 depending on what failed. A broken latch or hinge post runs on the lower end; a full operator replacement on a 20-foot equestrian estate gate runs on the higher end. We’ll give you the written number before any work starts, and we answer the phone around the clock at (626) 649-4572.
Wellington is not like most of Palm Beach County. Our Gate Repair crews work both sides of the divide here: the HOA communities with vehicle-loop and card-reader entry systems, and the Equestrian Preserve properties with 16 to 20-foot bi-parting swing gates and cantilever slides that have to clear horse vans and hay trucks. We know what each one demands, and we know when a repair needs architectural review before we touch a hinge.
Every visit includes shoe covers, drop cloths, and a cleanup photo before we leave. That’s the Cedarwell C.A.R.E. routine, and it’s not an upsell. It’s just how we work.
Why Latch & Post Gate Repair Is Wellington’s Preferred Gate Repair Company
Latch & Post Gate Repair has been part of the Cedarwell family since 2009. Cody Beckman leads the team, and he’s built the service around something most gate companies skip: documenting the care. A written price before work begins. Shoe covers and drop cloths on every visit. A photo of the clean-up before the technician walks out the gate. If you’ve got kids sleeping or a dog that loses its mind at loud tools, we schedule around it.
Wellington homeowners call us because we understand how much coordination an HOA gate repair actually takes. You can’t just show up and start welding. The board needs to know what’s being replaced, whether the finish matches the community standard, and whether the gate still meets Palm Beach County’s large-missile impact requirements from the Hurricane Irma-era code updates. We handle that conversation, not just the wrench work.
Our technicians are background-checked, uniformed, and factory-trained on the brands Wellington families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Mighty Mule. That means the right diagnostic happens on the first visit, not the third.
Metal Gate Repair in Wellington
Metal gate repair in Wellington usually means one of three things: a sagging ornamental iron panel, a hinge post that has moved, or rust and weld fatigue where the gate meets the post. On equestrian properties off Pierson Road and South Shore Boulevard, we also see plenty of rack and pinion damage from residential operators that were never sized for a 600-pound gate being hit by a gooseneck trailer twice a day.
Most metal gate repairs in Wellington run between $320 and $1,800. A hinge post reset starts around $320. A full panel straighten, re-weld, and re-hang on a 18-foot estate gate can reach $1,800 or more when the post footing needs re-pouring. You’ll see the exact number before we start.
Hinge and Post Reset
The most common metal gate failure in Wellington is not the gate itself. It’s the post footing. Former Everglades agricultural land holds water, and when a low-lying lot saturates for months, the post moves. The gate binds at the latch, the operator strains, and eventually something breaks. We reset the post, re-pour the footing, and re-hang the panel so the latch catches clean.
Weld and Rust Repair
Ornamental iron gates on Wellington estates take a beating from sun, rain, and the daily humidity from May through October. Surface rust starts at the weld joints first. We grind, re-weld, prime, and finish to match. If your HOA has a specific paint spec, we’ll match it, and we’ll coordinate the finish approval with your management company before we spray.
Wood Gate Repair in Wellington
Wood gate repair in Wellington is common in the older HOA communities built through the 1980s and 1990s, where a side yard or rear access gate was originally framed in pressure-treated lumber or cedar. The South Florida humidity and summer rain cycles rot the bottom rail first, then the hinge screws lose their bite, and the gate drags on the driveway.
Expect to pay between $240 and $900 for most wood gate repairs in Wellington. Replacing a rotted bottom rail and re-hanging the gate typically lands around $240 to $450. Rebuilding an entire 6-foot wood gate with new rails, pickets, and hardware runs closer to $600 to $900. You’ll have the written price before any lumber gets cut.
Rotted Rail Replacement
The ground contact point is where wood gates fail. Water wicks up the end grain, the rail softens, and the gate sags until it won’t latch. We cut out the rotted section, sister in new material, and re-secure the hinges. If the gate has an automated operator, we’ll also check the operator’s force settings once the gate swings clean again.
Gate Realignment and Latch Replacement
Sometimes the wood is fine and the hardware is the problem. A sagging gate that scrapes the paver driveway might just need hinge adjustment and a new latch. That’s a $200 to $300 fix in most Wellington homes. The first thing we check is whether the post itself is still solid. If the post moves, we’ll tell you before we adjust anything.
Trusted Brands We Service in Wellington
We service the operators and access systems Wellington residents already own. That includes Linear and DoorKing on HOA community entries, Viking on residential slide gates, and Ghost Controls on tube and farm gates throughout the Equestrian Preserve. We keep common control boards, receivers, and safety-edge parts stocked for quick turnaround in Wellington, which matters when a lightning strike takes out a community gate in July and the HOA wants it running the same day. Our techs are factory-trained on all of these brands, so the diagnostic is right the first visit.
Common Gate Repair Problems We See in Wellington Homes
- Post footing movement from saturated Everglades soil. Wellington sits on former agricultural land that holds water. When a low-lying lot saturates through the rainy season, gate posts heave and shift, and the gate binds at the latch. The operator is rarely the root cause, and resetting the post is the permanent fix.
- Lightning-fried control boards from June through September. Wellington’s daily summer lightning is hard on gate electronics. We replace control boards, receivers, and loop detectors on HOA entries all summer long. The symptom is a keypad that powers up but won’t open the gate.
- Undersized operators on equestrian estate gates. A 16-to-20-foot ornamental iron gate on a horse property cannot run on a residential ½ HP opener. It sags, strips the rack, and eventually rips the drive apart. We upsize to commercial FAAC or BFT operators built for the load.
- HOA entry gates with bound slide tracks. When a long slide gate’s track shifts out of level, the gate jams halfway and the loop detector reads a vehicle that isn’t there. We re-level the track, re-set the post, and recalibrate the loop. The community gate opens smoothly again.
Pricing for Gate Repair in Wellington, FL
Gate repair in Wellington spans a wide range because the properties here are so different. A standard latch or hinge repair on a residential gate runs $240 to $450. A post reset with concrete footing work starts at $320 and can go to $900 if the post is oversized or carries an automated panel. Full operator replacement on an HOA community gate or a 20-foot estate slide gate runs $1,400 to $2,400, including entrapment protection and safety-edge integration. The price you receive is written and agreed before any work begins. That’s not a courtesy; it’s how we operate. Call (626) 649-4572 and we’ll schedule a free estimate at your Wellington property.
We Also Serve Cities Near Wellington
Our crews handle Gate Repair in Wellington and the surrounding communities, including Royal Palm Beach, Greenacres, West Palm Beach, and Palm Beach Gardens. If you’re just outside the village line, call us. We’ll let you know if we can get to you, and when.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Wellington
Because the post footing has moved. Wellington sits on former Everglades agricultural land, and seasonal ground saturation causes post footings to heave and shift, which puts the entire gate out of alignment and forces the operator to strain until the hinge post fails. The fix is re-pouring the footing and resetting the post, not just replacing the operator. Call (626) 649-4572 and we’ll assess the footing before we quote anything.
Yes. We service the full access stack: card readers, loop detectors, operator control boards, safety edges, and the gate itself. Many HOA communities in Wellington have a system where the gate arm or slide track binds after the post shifts, and we fix the foundation problem and the electronics in the same visit. Estimates are free, and we’ll coordinate with your management company throughout.
Yes, it is one of the most common calls we get in Wellington from June through September. Daily summer lightning strikes damage control boards and access receivers across the village, especially on HOA entry gates. We stock common boards for Linear and DoorKing systems locally, which helps get your gate running fast. Call us and we’ll get you a written price for the board replacement before we order anything.
In most cases, the gate was never paired with the right operator. A 20-foot cantilever slide gate on an equestrian property is heavy, and if a previous installer paired it with a residential-rated opener, the drive strips out under normal trailer traffic. We replace it with a commercial operator sized for the load and add the required entrapment protection. The fix usually runs $1,800 to $2,400, and it’s quoted in writing before we order parts.
Wellington HOA community gates must meet current entrapment protection standards, including non-contact sensors, safety edges, and an exterior manual release that works under load. If your gate was installed before the latest code updates, it may not comply. We verify all of this during a repair visit and flag anything that needs attention. Call (626) 649-4572 to schedule a safety review.
Wellington’s HOA approval reality: Before you replace a gate on a community property, know that many Wellington HOAs require architectural approval for gate style, height, and finish. That review happens before the crew arrives, not after. We’ll tell you which fixes need board sign-off and which don’t, and we’ll handle the documentation with your management company so the repair doesn’t stall.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Wellington since 2009.