Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across The Acreage
Gate repair in The Acreage usually means one of two things: a gate that won’t open, or a gate that won’t stay closed. Most calls we take from The Acreage homeowners involve a legacy operator that stopped working after a storm, or a swing gate that’s sagging because its post has sunk into the soft ground. We’re the local team that knows these streets, the soil, and the older hardware that came with the property. Call (626) 649-4572 and a live person answers, no matter the hour.
Why Latch & Post Gate Repair Is The Acreage’s Preferred Gate Repair Company
Since 2009, Latch & Post has worked only on gates. That focus matters in The Acreage, where a single street can carry a dozen different operator models from three decades of piecemeal installation. Our technicians see Viking, Ghost Controls, and DoorKing boards every week, along with discontinued LiftMaster and FAAC units that parts suppliers forgot. We carry the common boards, photocells, and loop detectors for these brands, so a trip to The Acreage rarely needs a second visit for parts.
When we arrive at a home in The Acreage, the routine is the same every time: shoe covers on, drop cloths down, and a written price before any tool leaves the truck. Cody Beckman set that standard, and the 365-Day Done Right Promise backs it. If something isn’t right, we come back and make it right. No argument, no fine print. That’s why families from 60th Street North to Orange Boulevard call us first.
We know the lots here. We know the equestrian properties and the long driveways. We know that a gate post on mucky peat behaves differently than one on solid fill. And we know that when a gate stops working in The Acreage, it’s rarely just one thing. We fix the whole system, not just the symptom.
Sliding Gate Repair in The Acreage
Sliding Gate Repair in The Acreage often comes down to two things: the track and the operator. On properties with long, unpaved driveways, sand and shell rock wash onto the track after every heavy rain. The gate then grinds its own wheels flat, the motor pulls more amps, and the operator burns out faster than it should. We see it constantly on the rural lots here, especially where the driveway slopes toward the road and carries runoff straight into the gate hardware.
A sliding gate repair in The Acreage typically runs $180 to $420 for track cleaning, wheel replacement, and limit-switch adjustment. If the operator itself is dead and the board is a current model, you’re usually looking at $400 to $850 for a replacement operator installed. You’ll see the exact number in writing before we start, and it’s agreed before any work begins. That’s not optional for us. It’s how we’ve worked since day one.
Track Repair and Realignment
The tracks on Acreage sliding gates accumulate sand, grass clippings, and rust scale from the humidity. A gate that shudders mid-travel usually has a bent bracket or a wheel that’s seized. We pull the gate off its track, clean and true the rail, and replace any wheel that’s ground out of round. When we finish, we run the gate five full cycles and watch the track alignment as the gate’s weight shifts.
Operator and Limit Switch Replacement
When a sliding gate stops an inch short of the closed position, the limit switch has drifted or failed. That’s a simple repair on a modern unit. On a 1990s board, though, the limit switch may not exist as a replaceable part. We’ll tell you honestly when a retrofit makes sense and when a new operator is the cheaper long-term fix. Two quotes, both written, no pressure to pick the expensive one.
Wrought Iron Gate Repair in The Acreage
Wrought Iron Gate Repair in The Acreage is most often about the post, not the iron itself. The Everglades-derived soil here is saturated for much of the year. A heavy iron gate hung on a post set in mucky peat will sink, and once the post drops even an inch, the gate sags, the hinges bind, and the operator has to push against the ground. That’s why the same Ornamental iron gate that worked fine for a decade suddenly needs an operator every two summers.
A typical wrought iron repair in The Acreage, meaning hinge replacement or weld repair plus realignment, runs $150 to $380. When the post has sunk and needs a new concrete footing, the job is usually $450 to $900. We quote it clearly before we touch it, and the 365-Day Done Right Promise stands behind whatever we do. It’s a written price, not a verbal estimate that drifts.
Hinge and Post Repair
A sagging iron gate in The Acreage almost always traces back to the post. We dig out the old footing, reset the post with a wider base and better drain, and re-hang the gate to sit square. The difference is immediate. No more dragging, no more reversing in the middle of a cycle, no more operator motors screaming to close the last two inches.
Rust and Weld Repair
The humidity near the Loxahatchee National Wildlife Refuge and the seasonal standing water on low-lying Acreage lots accelerates corrosion on every exposed steel surface. We grind back to clean metal, weld in new material where the rust has eaten through, and prime and paint to match the existing finish. It won’t rust out in the same spot the following season if the prep is done right. We take the time to do it right.
Trusted Brands We Service in The Acreage
We are factory-trained on the brands The Acreage homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters here, because this community is not standard. We open control boxes on the same street and find a Viking on one property, a Ghost Controls on the next, and an early DoorKing on the one after that. We stock common boards, remotes, and safety sensors for these brands, so the fix usually happens the same day. No waiting a week for a part to ship.
Common Gate Repair Problems We See in The Acreage Homes
- Discontinued control boards after lightning. Palm Beach County logs over 50 lightning-strike days a year, and The Acreage’s open lots leave gate wiring unshielded. One summer strike fries a legacy board, and there’s no drop-in replacement. A surge-protected retrofit is the only way to stop the cycle.
- Posts sinking into mucky peat. The soil out here is not clay. It’s muck and saturated sand, and posts set years ago without proper footings drift. A post down six inches means a gate that drags, a bind on the hinges, and an operator that works overtime until it fails.
- Safety photocells and loop detectors tripping after rain. Buried conduit and operator vaults around The Acreage frequently sit in standing water after a summer downpour. Photocell circuits and loop detectors that get damp send false signals, so the gate reverses, or refuses to close, or opens itself at 2 a.m.
- Wooden gate posts rotting at the base. Homes built between the late 1980s and 2000s often have timber posts carrying the gate hardware. Water sits at the soil line for months. The post rots from the inside out, and the first time anyone notices is when the whole gate tips.
Pricing for Gate Repair in The Acreage, FL
These are the real numbers for The Acreage. A hinge and latch repair runs $150 to $300. A track and wheel job on a sliding gate runs $180 to $420. A full post reset with a new concrete footing runs $450 to $900. An operator replacement runs $400 to $850 for the unit and installation on a current-model board. A surge-protected retrofit on a legacy board runs $120 to $300 in parts. The written quote you get before any work starts always includes labor, parts, and cleanup. No line items added later, no “we found something else.” If we find something else, we stop and talk to you first.
We Also Serve Cities Near The Acreage
Along with Gate Repair in The Acreage, our team covers nearby communities across the region. We take calls from Jacksonville, Miami, Tampa, and Orlando regularly. If you live just outside The Acreage, give us a call. If it’s a gate, it’s what our Gate Repair team does every day. We’d be glad to help.
Serving The Acreage, FL - Our Local Coverage Area
We’re based in the The Acreage area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in The Acreage
In most cases, yes, it can be retrofitted. The breaker-tripping after a storm is usually a short or surge path on the old control board, and if the board is a known discontinued model, a generic retrofit board with surge protection often costs less than a full operator replacement. We’ll open the control box, show you the corrosion or damage, and give you a written retrofit quote and a written replacement quote side by side. You pick. Call (626) 649-4572 for a free assessment.
Because the post is likely sinking into the mucky peat soil, not the hinges failing. A hinge adjustment on a post that keeps dropping is a temporary fix. The real repair is pulling the post, widening the footing, adding a proper drain base, and resetting it so the gate hangs square. We see this on horse properties throughout The Acreage, especially along the low-lying lots near the wildlife refuge boundary. Call for an exact quote; the assessment is free.
Usually both. The Acreage sits on low-lying, poorly drained land, and after a big summer storm, water pools around the gate operator vault and the buried conduit. That moisture gets into the photocell wiring or the loop detector and creates a false circuit, so the gate reverses when it shouldn’t or refuses to close. We fix the electrical side and we’ll tell you honestly if the real fix is a drainage trench or a raised vault. The price is written before we start either way.
We do. Many The Acreage properties are active horse properties, and we work on the heavy agricultural pipe gates used for corrals and paddocks just as often as we work on the automated ornamental driveway gates at the front. Hinge replacement, post reset, catch-pull alignment, it’s all done with the same written-price policy. Your floors inside the house stay clean, and the gate at the barn works like it should.
Yes, and on The Acreage lots it’s one of the most common failure points after rain. The loop detector reads a metal detector-style wire buried in the driveway, and when water sits in the saw cut or the wire’s insulation has a nick, the detector sends false “vehicle present” signals. We test the loop, isolate the signal, and replace the detector or the loop wire as needed. Most of these run $180 to $380 to correct, and you’ll see it in writing before work begins.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving The Acreage, FL since 2009.





Before
After
Before
After
Before
After