Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Temple Terrace
Most gate repairs in Temple Terrace take between 90 minutes and half a day, and many can be scheduled the same week you call. If your gate is stuck open, dragging, or won’t respond to the remote, you want someone who knows the difference between a fried control board from a summer lightning strike and a hinge post that’s been pushed out by a live-oak root. That’s the kind of local diagnosis you get from our Gate Repair technicians. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Temple Terrace’s Preferred Gate Repair Company
We work on a lot of gates in Temple Terrace, from the 1920s Mediterranean Revival streets near the Hillsborough River to the 1970s and 1980s apartment corridors around USF. Homeowners here tend to ask the same two things: what’s wrong with it, and what’s it going to cost before you start. We answer both in writing before any work begins. Cody Beckman leads our team, and every technician who walks onto your property is background-checked, uniformed, and trained on the brands families in this area actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
We also respect what’s inside your home, not just what’s at the property line. Shoe covers and drop cloths go down before we step inside your Temple Terrace home. We clean up after ourselves and take a photo of the finished cleanup before we leave. It’s part of the Cedarwell Care Promise, and it’s included on every visit, not billed as an add-on.
Driveway Gate Repair in Temple Terrace
Driveway gate repair in Temple Terrace usually runs $180 to $340 for hinge and latch work, and $350 to $650 when the gate operator, control board, or swing arm needs replacement. Most jobs are completed in one visit. The first thing we do is look at the gate’s path before we look at the motor. In Temple Terrace, that means checking for root heave from the live-oak canopy, which buckles concrete slabs and shifts posts faster than the operator can compensate.
Post and Hinge Work
When a post shifts in saturated sandy soil, the gate sags and starts dragging. We reset the post, pack the footing properly, and re-align the hinges so the gate swings level. If the original hardware is worn, we replace the hinge pins and bushings rather than the whole gate.
Operator Repair and Reset
If the gate moves but labors, or stops mid-travel and beeps, the operator needs attention. We troubleshoot the limit switches, force settings, and control board on LiftMaster, FAAC, BFT, and Linear units. Most operator repairs are done the same day we diagnose them.
Gate Welding in Temple Terrace
Gate welding in Temple Terrace typically costs $150 to $400 for a standard crack repair or hinge re-weld, and $500 to $1,200 for structural frame repair or reinforcing a sagging section. Many of the gates we weld here are original wrought iron from the 1920s and 1930s. Decades of Hillsborough River humidity pits the metal, seizes hinges, and weakens joints. Welding restores the gate without breaking the historic character.
Period Iron Restoration
We don’t replace ornamental iron with aluminum panels. We grind out the rust, weld in new steel where the frame has thinned, and match the finish to the original. The result is a gate that looks like it belongs on a 1920s Temple Terrace lot, because it does.
Crack and Stress Repair
Solid-infill gates catch wind load during storms and torque the hinge post. The stress usually shows as a hairline crack at the hinge weld or mid-rail. We repair it before it propagates, and we check the post footing while we’re there because the two failures usually happen together.
Trusted Brands We Service in Temple Terrace
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we work on these brands every week, we keep the most common control boards, limit switches, and remote transmitters in stock for Temple Terrace customers. That means fewer return trips and a gate that’s back in service sooner. We don’t guess at compatibility, we match the part to the exact model on your gate.
Common Gate Repair Problems We See in Temple Terrace Homes
- Lightning-fried control boards. Tampa metro leads the U.S. in lightning strike frequency, and summer storms routinely take out gate operator boards and loop detectors. If your gate stopped after a storm, the board is the first thing we check.
- Root heave from live oaks. The mature tree canopy Temple Terrace is known for sends surface roots under slabs and posts. A dragging gate is almost always a root-heave problem first and an operator problem second.
- Rust-pitted ornamental iron. River humidity corrodes original wrought iron over decades. Hinges seize, frames weaken, and the gate starts to lean before anything electrical fails.
- Wet-season post shift. In the flood plain along the Hillsborough River, sandy low-elevation soil saturates in the wet season and posts heave. Gates that were level in April can drag by August.
Pricing for Gate Repair in Temple Terrace, FL
Here are the ranges we see most often in Temple Terrace: hinge and latch repair, $180 to $340; gate welding, $150 to $400 for a standard repair; control board replacement, $250 to $500; operator replacement (motor only), $400 to $700; full operator and arm replacement, $600 to $1,100; post reset and re-alignment, $350 to $800. When we give you a quote, it’s the real number, written down, before any work starts. You’ll never get a surprise invoice from us. The 365-Day Done Right Promise covers every repair and installation we do. If it’s not right, we make it right, no argument.
We Also Serve Cities Near Temple Terrace
Our Gate Repair in Temple Terrace customers often ask if we cover nearby communities. We do. You’ll find our crews working in Jacksonville, Miami, Tampa, and Orlando as well. Same written pricing, same cleanup standard, same 365-Day Done Right Promise.
Serving Temple Terrace, FL - Our Local Coverage Area
We’re based in the Temple Terrace area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Temple Terrace
Check the breaker, then check the battery backup if your operator has one. If neither is the problem, the control board likely took a surge. Summer lightning strikes across the Tampa metro fry gate operator boards and loop detectors routinely. Call (626) 649-4572 and we’ll diagnose it over the phone and schedule the repair.
In Temple Terrace, dragging gates are almost always caused by root heave from a live oak or wet-season post shift in sandy soil. The operator is rarely the problem. We find the real cause before we touch the motor, and we reset the post footing rather than just cranking the force settings up, which wears the operator out faster.
Yes. Temple Terrace’s historic district has its own preservation guidelines, separate from Hillsborough County’s, and gates from the 1920s to 1940s need period-sensitive repair, not replacement. We do restoration welding on ornamental iron that respects the original design and materials. Call (626) 649-4572 for an assessment.
Most gate operators have a manual release lever or key located on the motor housing. Pulling it disengages the gear drive so you can push the gate by hand. Do not force a gate that won’t move easily, and do not attempt to dislodge a gate stuck mid-travel while the operator is powered. If you’re unsure where the release is on your LiftMaster, FAAC, BFT, or Linear unit, call us and we’ll walk you through it.
Yes. UL 325 is the national safety standard for automatic gate operators, and it applies to every residential gate in Temple Terrace, including historic properties. It requires entrapment protection such as photoelectric sensors, reverse on contact, or a monitored edge. We verify all entrapment protection on every gate we service and bring non-compliant operators up to standard as part of the repair.
Call Latch & Post Gate Repair in Temple Terrace
If your gate is dragging, stuck, or won’t respond, we’ll come out, diagnose the problem, and hand you a written price before any work starts. No pressure, no surprise charges. Shoe covers and drop cloths go down inside, the cleanup photo comes before we leave, and the 365-Day Done Right Promise covers everything we do. Call (626) 649-4572 any time. A live person picks up.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Temple Terrace families since 2009.