Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rohnert Park
Gate repair in Rohnert Park usually means one of two things: a sagging swing gate that won’t latch anymore, or an electric opener that has lost its mind. Most repairs run $180 to $580 depending on whether we’re replacing hinge hardware or the post itself. If your gate is dragging on the ground or the keypad stopped opening it, call (626) 649-4572 and we’ll get a technician out to look at it, usually the same day. We know the numbered sections here well, and we know the original gates going into them.
Why Latch & Post Gate Repair Is Rohnert Park’s Preferred Gate Repair Company
We’re part of the Cedarwell family, independently owned and operating in this area since 2009. Every technician who works in Rohnert Park is background-checked, wears a uniform, and follows the Cedarwell Care Promise: a written price before any work starts, shoe covers and drop cloths whenever we step inside, and a photo of the cleanup before we leave. That matters when the gate is off the kitchen or the back gate opens into a room with sleeping kids.
Our Gate Repair team works on the brands families in Rohnert Park actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A live person answers our phone 24/7, so when a gate goes down at 9pm and the dog is loose in the yard, you won’t hit a voicemail. Cody Beckman leads our crews, and the standard we hold is simple: if it’s not right at the end of the visit, it gets made right. The 365-Day Done Right Promise covers every repair, no fine print.
Wrought Iron Gate Repair in Rohnert Park
Wrought iron gate repair in Rohnert Park usually means freeing a gate that has begun to bind or sag at the hinges. The original iron gates in the C and D sections were built to a spec, and wind from the Petaluma Gap works on the hinge barrels year after year. We see rust expanding inside the barrel, drop rods bending where they drag on the slab, and latch plates that no longer meet the post.
A typical wrought iron hinge-pin and bushing repair here runs $220 to $410. If the gate post is still sound and we’re just correcting alignment at the hinge, it’s usually on the low end. If we’re welding a cracked picket or rebuilding a latch, the written price comes before we touch anything.
Hinge Barrel Rust and Wind-Driven Sag
The Petaluma Gap winds don’t just push a gate, they load and unload the hinge line hundreds of times a day. That constant cycling wallows out bushings and lets the gate drop. We replace the bushing and sometimes the hinge barrel itself, then set the gate back to a clean reveal between the bottom rail and the walk.
We use pet-safe lubricants where there’s a choice, and we keep quiet tools when kids are napping. You’ll see the exact number in writing before we start.
Latch Plate Realignment
A latched gate is a safe gate. When wind sag pulls the bars down or apart, the latch plate misses, and people start shimming it with string or bungees. We realign the plate, bush the hinge, and set the strike so the gate closes with a solid click. Most latch realignment runs $180 to $280 in Rohnert Park.
Metal Gate Repair in Rohnert Park
Metal gate repair in Rohnert Park covers the steel and aluminum tube gates on the newer builds, plus reinforced gates on acreage properties around the city edge. The work is usually frame straightening, hinge replacement, or fixing an operator that has pulled its mounting bolts loose. A bent steel frame from wind or from a vehicle bump is a common call here, and it’s often fixable without replacing the gate.
Most metal gate repairs in Rohnert Park run $240 to $520. A simple hinge replacement on a tube gate is quick. A steel frame that needs to come off and be jigged straight again takes longer, and the written price reflects that before any work begins.
Frame Straightening and Corner Weld Repair
The wind off the Santa Rosa Plain hits broad metal gates hard, and the weakest point is the corner where the stile meets the rail. We clamp, square, and weld or bolt the corner back, then re-hang the gate on new hinges. We don’t paint over a crack and call it done.
If the damage is beyond repair, we say so, and we quote a replacement gate at the same visit. No pressure, just a straight price.
Gusset Reinforcement for Wind-Load Areas
On wide gates or gates with an operator mounted, we often add a gusset plate at the corner to spread wind load. It’s a small change that keeps the frame from tearing again. This is the kind of fix we recommend regularly in Rohnert Park’s numbered sections, where every block catches the same afternoon wind pattern.
Trusted Brands We Service in Rohnert Park
Our technicians are factory-trained on FAAC, BFT, and Linear equipment, along with the rest of the brands families in Rohnert Park own. Having local parts stocked for FAAC and LiftMaster operators means we don’t wait a week for a board while your gate sits open. We also service Viking and Ghost Controls operators on the residential edge of town. A live person answers 24/7, and we schedule around your day, not the other way around.
Common Gate Repair Problems We See in Rohnert Park Homes
- Rotted 4×4 redwood hinge posts. Original tract-home gates from the 1960s through the 1980s set their posts directly in soil. Forty to sixty years of winter fog and marine moisture later, the post rots at grade and the whole gate sags.
- Wind-hammered hinge bushings. Afternoon winds through the Petaluma Gap load and unload swing gates constantly. Hinge pins wallow out fast in Rohnert Park, and latches stop meeting the striker.
- Rusted drop rods and safety edges. The same marine air that rots the wood also rusts steel hardware and degrades photocell connections on automatic gates, causing phantom reversals or dead keypads.
- Tract-uniform failures across whole blocks. Because sections were built to one spec in one year, a gate that fails at one house is often failing at the next three. That lets us pick up the same repair pattern fast on a street.
Pricing for Gate Repair in Rohnert Park, CA
A latch adjustment or hinge bushing on a standard swing gate runs $180 to $280. Replacing a rotted post, pouring a concrete footing, and re-hanging the gate runs $420 to $680. Electric opener repairs - a bad board, a stripped limit switch, or a keypad that won’t transmit - generally run $240 to $520. For any job, you get a written price before we start, and that number does not change at the end unless we agreed on a change in writing first. Estimates are free. Call (626) 649-4572 and we’ll tell you exactly what it costs to fix yours.
We Also Serve Cities Near Rohnert Park
Our Gate Repair team covers the surrounding area too, including Cotati, Petaluma, Santa Rosa, and Sebastopol. If you’re just outside Rohnert Park, see Gate Repair in Rohnert Park for details on local scheduling and response times. Same live-person answer, same written pricing.
Serving Rohnert Park, CA - Our Local Coverage Area
We’re based in the Rohnert Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Rohnert Park
The usual culprit is the original 4×4 redwood or cedar hinge post set directly in soil. It rots at grade from winter fog and marine moisture, then the Petaluma Gap wind load pushes the hinge line out of true. If the post base is not addressed, the gate will sag again within a season. We set new posts in concrete footings and correct sag at the hinge side, so the repair holds. Call (626) 649-4572 for a site look - estimates are free.
Yes, solar is often the most practical choice on long or rural driveways where running mains power would be costly. FAAC and BFT both make solar-ready operators that work well in our climate, though winter fog reduces panel output if trees shade the array. We size the panel to the operator and the site. We’ll quote the full system in writing before any work starts.
Yes. A vehicular automatic gate must have entrapment protection - photo eyes, a reversing edge, or both - installed and functioning. This is a safety requirement, not an option. If your operator is cycling on phantom obstructions, the photo eyes or loop detector wiring may have corroded from Rohnert Park fog moisture. We test the whole safety circuit and replace what’s dead. Call (626) 649-4572 for a proper diagnosis - the estimate is free.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, along with most other residential brands. If the board, limit switch, keypad, or loop detector has failed, we can usually replace it from local stock on the same visit. The written price comes first. Phone (626) 649-4572 anytime.
Noticeably faster than in more sheltered Santa Rosa or Petaluma neighborhoods. The gap funnels steady afternoon wind across the Santa Rosa Plain, directly into Rohnert Park. Hinge bushings and drop rods that might last 15 years inland can be slopped out in 8 to 10 here. That’s why we inspect the hinge line and the post base, not just the panel. Call us for an honest assessment of what’s actually wearing.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Rohnert Park since 2009.