Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pasadena
Most gate repairs in Pasadena can be handled same-day or next-day, with a written price delivered before we touch a single hinge. If your gate is sagging, jammed, or refusing to open after one of our windstorms, call us at (626) 649-4572 and a live person will answer, day or night. Our technicians know this city block by block, from the ranch-style homes off South Shaver to the commercial perimeters along the industrial corridors.
We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been doing this work since 2009. We focus only on gates. No gutters, no fencing side projects, no general handyman work. Just gates: the latch that holds them and the post that carries them. That’s the job we focus on.
Why Latch & Post Gate Repair Is Pasadena’s Preferred Gate Repair Company
Pasadena homeowners keep calling us back for three reasons: we write the price down before we start, we leave the house cleaner than we found it, and we actually fix the problem so it doesn’t return next storm season. Every technician arrives in uniform, background-checked, and carrying shoe covers and drop cloths as standard equipment. We lay drop cloths on the floor and put on shoe covers before we step inside, so your floors stay clean whether we’re working at the gate post or walking through to the operator box in your garage.
The 365-Day Done Right Promise covers every repair and installation we do. If it’s not right, we make it right. No argument, no fine print. That’s why families near Strawberry Park and around San Gabriel Boulevard keep our number saved in their phones. When a gate goes down in a storm, they know the call gets answered. One live person, 24 hours a day, seven days a week. No voicemail, no callback queue.
Cody Beckman leads our team, and he insists on one thing above all else: respect the family’s time and quiet hours. If a baby is napping, we use quiet tools. If your dog is nervous, we’ll tell you before we move anything near the fence line. That’s the Cedarwell C.A.R.E. standard, and it’s not an upsell.
Commercial Gate Repair in Pasadena
Commercial Gate Repair in Pasadena means working with the heavy-duty slide and swing gates that protect light-industrial facilities along Red Bluff Road, Pasadena Boulevard, and the warehouse districts near the Ship Channel. These gates cycle dozens or hundreds of times a day, and they fail differently than residential gates: rack and pinion wear, photo-eye misalignment, sheared chain links, and operators that overheat in our humid summers. Our technicians are factory-trained on LiftMaster, DoorKing, and Viking commercial operators, and we carry the replacement parts that these systems actually need.
Slide Gate Rack and Pinion Repair
When a commercial slide gate stalls mid-travel, the usual suspects are a worn rack gear, mud packed into the track, or an operator that lost its limit settings. We clear the track debris, replace bent or stripped rack sections, and re-set the operator limits so the gate travels fully closed without slamming.
Access Control and Safety Sensors
Commercial gates in Pasadena are often tied to keypads, card readers, or vehicle loop detectors. When a gate stops responding to the entry system, we test from the keypad back to the operator board, replace the faulty component, and confirm the safety photocells and reversing edges are functioning so the gate never closes on a vehicle or a person.
Iron Gate Repair in Pasadena
Iron Gate Repair in Pasadena is a different craft from what you’d find in dry inland neighborhoods. The wrought iron and steel gates on the older ranch-style homes here have spent decades in humid, chemically-laden air, and the failures are predictable: rust-through at the welds, hinge pins that snap from wind shear, and frames that pull out of square. We cut out the corroded sections, weld in new steel, grind the joints smooth, and treat the surface before painting so you’re not back in the same spot next year.
Weld Repair and Structural Reinforcement
When a solid-infill iron gate catches a hurricane gust, the wind load concentrates at the hinge welds and the post connection. We reinforce that junction with gusset plates and hot-dip galvanized hardware, so the gate’s structure survives the next storm instead of shearing off at the post.
Rust Treatment and Corrosion Control
Bare steel near the Ship Channel corridor rusts through in under two years. We grind off the scale, apply a rust-converting primer, and use marine-grade stainless fasteners wherever the gate is within a few miles of the refineries. This is the specific, local fix that keeps Pasadena iron gates standing where neighboring cities’ gates would be sagging.
Trusted Brands We Service in Pasadena
We’re factory-trained on the brands families around Pasadena actually have bolted to their posts: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For our Pasadena calls, we keep DoorKing, Viking, and Ghost Controls boards and remote transmitters on the truck, because those are the operators we see most often on the residential and light-commercial gates around this city. When we don’t have a part, we source it fast and come back, because a gate that won’t open is a family stuck outside their own home.
Common Gate Repair Problems We See in Pasadena Homes
- Wind-snapped hinge posts on solid infill gates. Hurricane-season gusts push against the solid panel like a sail, and a post weakened by years of sulfide-laden Gulf humidity finally gives way at the base. The fix is a reset post with a larger footing, not just new bolts.
- Post-heaving from saturated soil after flood events. Pasadena took severe water during Hurricane Harvey, and the clay soils here hold moisture for months. Gates that were plumb before the storm end up dragging or binding because the post moved in the ground.
- Rust-through on hinges and fasteners near the Ship Channel. Airborne sulfur compounds accelerate corrosion on bare steel. Within a few miles of the refineries, standard hinges fail in under two years, so we replace them with hot-dip galvanized or stainless hardware.
- Operators that stall after a power cut. When power returns after an outage, the operator’s limit settings are sometimes scrambled. The gate reverses before fully closing, or refuses to move at all. We re-set the limits and test the manual release so you’re never stuck during the next storm.
Pricing for Gate Repair in Pasadena, CA
A typical gate-latch replacement in Pasadena runs $120 to $220. Hinge replacement with hot-dip galvanized hardware usually lands between $180 and $340, depending on how many hinges and whether the post needs re-sleeving. A full weld repair on a rusted iron gate frame costs $350 to $700 for a single section. Broken operator boards are the most expensive common repair, running $400 to $1,100 installed, and a full residential swing gate with a new operator runs $2,800 to $6,500. You’ll see the exact number in writing before we touch anything. Estimates are free, and there’s no pressure to accept. Call (626) 649-4572 and we’ll walk through your gate’s symptoms, then give you a price range over the phone before we even schedule the visit.
We Also Serve Cities Near Pasadena
Our Gate Repair team works across the neighborhoods of Gate Repair in Pasadena, and we regularly travel to San Marino, South Pasadena, Altadena, and San Gabriel. If you’re a few blocks outside the Pasadena line, call us anyway. If we can’t get to you directly, we’ll point you to a Cedarwell-family specialist who can.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pasadena
Most residential gate operators in Pasadena have a manual-release handle, usually a red T-handle or a keyed lock, located on the operator arm or the motor housing. Pulling it disengages the gear and lets you push the gate by hand. We show every customer how to do this after we install or repair an operator, because storm-season power cuts in this city are common. If you can’t find the release and the gate is stuck closed, call us at (626) 649-4572. We’ll talk you through it.
Pasadena sits directly adjacent to the Houston Ship Channel petrochemical corridor, one of the densest concentrations of refineries and chemical plants in North America. Airborne sulfur compounds, hydrogen sulfide emissions, and industrial particulates combine with near-constant Gulf humidity to corrode bare-steel hardware at a dramatically faster rate than in Pearland or Friendswood. Standard hinges can rust through in under two years within a few miles of the refineries. That’s why we specify hot-dip galvanized hinges or marine-grade stainless fasteners on any gate work close to the channel.
In Pasadena, it’s usually both, and the post is the part most repair crews miss. When saturated soil heaves a post out of plumb, the whole frame shifts, and the panel sags even if the hinges are fine. We check the post first with a level, then inspect the hinge welds and the panel’s own frame. If the post has moved, we reset it with a deeper concrete footing before any panel work, because straightening a panel on a leaning post just means the sag comes back.
Yes. Under California and federal safety standards, any automatic gate operator in Pasadena must have functioning safety photocells or a reversing edge, and the sensors must be tested as part of any repair or installation. We also re-aim and test every photo-eye as part of our standard service, because a misaligned beam is the most common reason a Pasadena gate reverses for no apparent reason. The 365-Day Done Right Promise covers the sensor work we do.
Stalling usually comes from debris packed into the track, a bent or stripped rack gear, or a gate that has fallen out of square and is dragging on the rail. In Pasadena’s industrial lots, mud and gravel from truck traffic get ground into the rack teeth, and the gate loses engagement mid-travel. We clear the track, replace any deformed rack, and re-square the gate before re-setting the operator’s force limits, so the motor doesn’t burn out trying to push a gate that’s fighting its own track. For an exact quote, call (626) 649-4572. Estimates are free.
We Work Around Your Family’s Routine
A gate repair in Pasadena usually means a dog that wants to investigate the technician, or a kid napping in the front room. We get that. We ask before we move or touch anything, inside or outside. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. Before we finish, we take a photo of the clean-up and show it to you, so you know the drop cloths came up and the metal shavings are gone from your driveway.
Every gate comes down to two parts: the latch that holds it and the post that carries it. We fix both, with the right hardware for Pasadena’s humid, storm-exposed, ship-channel air. Call us at (626) 649-4572 for a free estimate. A live person answers.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Pasadena since 2009.