Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Mineral Wells
Gate repair in Mineral Wells usually comes down to one of three things: a post that has shifted in the clay, a hinge that has pulled loose, or an operator that has stopped responding. Most repairs here run between $180 and $640 depending on what failed, and we quote that number in writing before any work starts. Our Gate Repair team knows the tube-steel ranch gates and caliche-set cedar posts that cover this part of Palo Pinto County, and we can usually be on-site within 24 hours of your call. Call (626) 649-4572 and a live person picks up, day or night.
Mineral Wells sits at the exact point where ranch country meets city streets. That means the gate on a hay pasture off FM Road 1195 has almost nothing in common with the ornamental gate on a 1930s bungalow near downtown. We work on both, and we know which fix each one needs.
Why Latch & Post Gate Repair Is Mineral Wells’s Preferred Gate Repair Company
We have been part of the Cedarwell family since 2009, and every technician who rolls into Mineral Wells works to one standard: a written price before the first tool comes out, shoe covers and drop cloths before we step inside, and a photo of the cleanup before we leave. The 365-Day Done Right Promise backs the work, and if something is not right, we make it right without an argument.
Local customers keep calling us back because we name the actual problem instead of selling a replacement. A gate that drags the ground in June is usually a post that shifted in the shrink-swell clay, not a bad hinge. A gate that misses the latch in December is the same post after the ground dried out and contracted. We fix the footing, not just the symptom. And every gate still comes down to the same two parts: the latch that holds it and the post that carries it.
Our technicians are background-checked, uniformed, and factory-trained on the brands Mineral Wells families actually own including FAAC, BFT, and Linear. A live person answers the phone 24/7, so a 6 a.m. call about a gate stuck open gets a real response, not a voicemail queue.
Sliding Gate Repair in Mineral Wells
Sliding gate repair in Mineral Wells is common on the tight shared driveways and narrow FM-road frontages where a swing gate simply does not have room to arc. A sliding gate rides on a track and roller assembly, and when clay soil heaves beneath the track or gravel clogs the rollers, the gate binds, scrapes, or stops mid-travel. Repairs typically run $220 to $520 depending on whether we are replacing rollers, regrading the track bed, or realigning the frame after a vehicle clipped the leading edge.
Track and roller rework on rural drives
On Mineral Wells acreage lots, the track often sits directly on packed caliche. After a wet spring, that base swells and throws the track out of level. We re-set the track on a clean gravel bed, replace the roller brackets, and adjust the limit stops so the gate travels the full length without jamming.
Narrow shared driveways and tight clearances
Where two homes share a drive off a county road, the gate takes impacts from both sides. Repeated contact racks the frame and loosens the anchor bolts at the post. We square the frame, re-torque or replace the anchors, and set the operator force so the gate reverses gently instead of pushing through resistance.
Wrought Iron Gate Repair in Mineral Wells
Wrought iron gate repair in Mineral Wells mostly serves the older neighborhoods around the historic downtown and Camp Wolters area, where ornamental gates from the early-to-mid 20th century hang on masonry columns or heavy steel posts. The gates themselves are usually sound, but the hinge welds corrode, the sweat-in hinge pins wallow out, and the latch alignment drifts as the column shifts. Expect to pay $190 to $580 for hinge re-welding, pin replacement, and latch realignment on these gates.
Hinge and weld restoration on older gates
The heat and humidity of north-central Texas work on bare weld joints year-round. We grind back the corroded weld, re-weld the hinge barrel, and dress the joint clean. If the hinge pin has worn an oval into the barrel, we replace the pin and bushing so the gate swings without dragging.
Latch alignment on settling columns
Many of the older Mineral Wells homes have gate columns set on footings that predate modern code. When the column shifts a half-inch, the latch no longer catches. We shim the hinge leaf, re-align the strike plate, and set the latch throw so the gate closes with a solid click instead of hanging open.
Trusted Brands We Service in Mineral Wells
Our technicians carry parts for FAAC, BFT, and Linear operators, which means most automatic gate repairs in Mineral Wells are finished the same visit. We stock common control boards, limit switches, safety edges, and photo eye kits, and we can source Viking parts fast through our local supply network. Rather than a generic “replace the board” answer, we bench-test the operator, confirm which component failed, and show you the price in writing before we install anything.
Common Gate Repair Problems We See in Mineral Wells Homes
- Post shift from Palo Pinto County clay: The shrink-swell clay expands during wet winters and contracts in 100°F summers, racking cedar and pipe posts out of plumb. The gate drags by June and misses the latch by December, often twice in the same year.
- Weld-joint failure on bare steel pipe gates: Summer heat accelerates surface rust on the tube-steel ranch gates common around Mineral Wells. The welds at the hinge and latch points corrode first, and the gate sags or breaks free of the post without warning.
- Track and roller damage on shared drives: On narrow frontages and shared easements, vehicles and livestock clip the gate frame repeatedly. The track bed compacts unevenly, rollers crack, and the gate binds halfway through its travel.
- Automatic operator drift and sensor misalignment: Dust from caliche roads coats the photo eyes and limit switches on FAAC and BFT operators. A dirty sensor makes the gate reverse erratically or refuse to close, which is a safety problem if the gate is protecting kids or livestock.
Pricing for Gate Repair in Mineral Wells, TX
Here are the numbers we quote most often in Mineral Wells. A standard post re-set with concrete runs $280 to $520. Hinge replacement or realignment on a welded steel gate runs $180 to $380. Sliding gate track and roller work runs $220 to $520. A full weld repair with rust treatment and cold-galv finish runs $240 to $640. Operator control board replacement on a FAAC, BFT, or Linear unit runs $190 to $480 depending on the board.
What affects price most is access. If we can pull a truck right up to the post, the job is faster. If the gate is at the back of a pasture off a caliche two-track, that adds time. You will see the exact number in writing before we begin. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Mineral Wells
We serve Mineral Wells and surrounding communities, including Weatherford, Springtown, Aledo, and Azle. Dispatch and scheduling for these jobs are coordinated from the brand’s Dallas-Fort Worth office, and our crews work locally in each of these areas.
Serving Mineral Wells, TX - Our Local Coverage Area
We’re based in the Mineral Wells area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mineral Wells
Because the clay soil under the hinge post swells during wet springs and contracts in dry summer heat, shifting the post out of plumb. When the post leans, the gate sags and drags. We re-set the footing in concrete and realign the hinges so the gate clears the ground through the full wet-dry cycle. Call (626) 649-4572 if your gate is dragging now.
Yes. Sliding gates on narrow shared drives are one of the most common repairs we handle in Mineral Wells. We re-level the track bed, replace cracked rollers, and re-square the frame after vehicle impacts. The written price covers the full job before we start.
Yes. The auto-reverse is the most important safety feature on your operator, and if it fails, the gate can close on a child, a pet, or a vehicle. We test the entrapment sensor, the force settings, and the photo eyes on your FAAC, BFT, or Linear unit. Do not operate the gate until a technician has checked it.
On a rural acreage lot with a tube-steel gate on cedar posts, plan on checking the post plumb every season, and expect some adjustment work at least once or twice a year. The shrink-swell clay in Palo Pinto County does not stop moving, so a seasonal check is cheaper than a full post re-set after the gate drags hard enough to bend the hinges.
Yes. We regularly repair wrought iron gates near the historic downtown and Camp Wolters areas, where the gates hang on older masonry columns that shift slowly over time. Hinge re-welding, pin replacement, and latch realignment bring those gates back to a clean swing. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mineral Wells since 2009.