Gate Repair in Lake Park - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Lake Park

Gate repair in Lake Park usually costs between $180 and $650 depending on what failed: a latch replacement runs $180-$320, a hinge and post job runs $250-$500, and an operator control board for a salt-damaged unit typically lands between $380 and $650. Most standard repairs here are finished the same day, and you’ll see the exact price in writing before we touch anything. If you live off Park Avenue, along 10th Street, or near the lagoon side of town, call (626) 649-4572 and a live person answers, day or night.

Call (626) 649-4572

We know Lake Park not from a map, but from the gates we’ve opened here. The town’s position on the Lake Worth Lagoon means salt is always in the air and in the soil. That changes how we approach every repair, from the hinge pin we choose to the sealant on an operator board. We’re the Gate Repair specialists who treat a rusty hinge on an older bungalow as a different problem than the same hinge would be six miles inland.

Why Latch & Post Gate Repair Is Lake Park’s Preferred Gate Repair Company

Homeowners in Lake Park call us because we answer the phone and we name a price. The family on 9th Street with a sagging gate gets the same written quote before work starts as the homeowner near the Kelsey City core with a dead operator. No one gets a surprise invoice after the truck leaves.

Every job is backed by the 365-Day Done Right Promise. If a repair doesn’t hold, we make it right. No argument, no fine print. Our technicians are background-checked and uniformed, and they work to the Cedarwell C.A.R.E. values: we lay drop cloths on your floor, put shoe covers on before stepping inside, ask before we move anything, and send you a photo of the cleanup before we leave. Your floors stay clean, your pets stay inside, and your sleeping kid stays asleep.

We were called to a 1960s ranch on Park Avenue near the Lake Worth Lagoon where the original wrought-iron swing gate had been sagging for years. The hinge post footing was heaved and cracked from salt-laden soil. We re-poured the footing before touching the gate. The homeowner’s LiftMaster operator had a corroded logic board from salt spray and summer voltage surges. We replaced it with a sealed marine-rated enclosure, added a sacrificial anode to the mounting bracket, and installed a new safety photocell to meet UL 325 entrapment protection. The gate now swings cleanly, and the post footing is solid. That’s the difference between patching a symptom and fixing the gate.

Founded in 2009 as part of the Cedarwell family, Latch & Post focuses on gates and nothing else. We’re factory-trained on FAAC, BFT, Linear, and Viking, among others, and we fix the right part on the first visit because we’ve seen these failures before, on these streets, in this salt air.

Metal Gate Repair in Lake Park

Metal Gate Repair in Lake Park means dealing with what salt air does to steel. The wrought-iron swing gates on 1950s and 1970s homes throughout Lake Park were well built, but their hinge welds and frame joints have been oxidizing quietly for four or five decades. By the time a gate sags or binds, the problem is rarely just the hinge. It’s usually the post, the footing, or the corrosion inside the tube steel. We address all three. A standard metal gate repair in Lake Park runs $250-$500 for hinge and post work, and we quote the exact figure in writing before we begin.

Hinge and Post Replacement

On older Lake Park properties, the original gate post is often set in a cracked or heaved concrete footing. If we hang a new hinge on a post that moves, the gate will sag again within a season. We check the footing first, re-pour when needed, then set marine-grade hinges that can handle the lagoon air.

Weld and Rust Repair

Rust on a metal gate in Lake Park is not cosmetic. Salt spray gets inside the frame and eats from the inside out. We grind back to solid metal, weld fresh steel where the section is compromised, and coat the repair with an anti-corrosion primer made for marine environments. If the frame is rusted through in multiple places, we’ll tell you honestly whether patching is sensible or whether replacement is the cheaper five-year answer.

Wood Gate Repair in Lake Park

Wood Gate Repair in Lake Park has a different failure profile. Many homes off 10th Street and along the neighborhoods west of US-1 still have original wood gates, often pine or cedar, and the salt air plus the summer humidity works the hardware hard. The wood itself can hold up, but the hinges pull loose from the stiles, the latch plate corrodes, and the gate drops. A typical wood gate repair in Lake Park runs $180-$450, depending on whether we’re replacing hinges and a latch or rebuilding the frame section. The written price is yours before any work starts.

Gate Realignment for Wood Gates

When a wood gate drags or won’t close in Lake Park, we check the diagonal brace before anything else. Without a proper brace, the gate will always drop. We replace the brace, re-align the gate, and set the hinges so the weight carries into the post instead of the latch.

Frame and Stile Rebuilds

Wood gates here fail most often at the joint where the bottom rail meets the hinge stile. Rot sets in, the screws lose their bite, and the whole gate sags. We cut out the rotten section, splice in new treated lumber, and re-hang the gate square. Where the wood is too far gone, we say so and quote a new gate instead of selling you a repair that won’t last a Florida summer.

Trusted Brands We Service in Lake Park

We’re factory-trained on the operators Lake Park families actually have: FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we service these brands daily, we keep common boards, remotes, and safety parts on the truck. For a Lake Park homeowner with a dead FAAC board on a Saturday morning, that usually means one visit, not two. If you’re not sure what brand your operator is, we’ll identify it when we arrive and tell you the real cost to repair it before you commit to anything.

Common Gate Repair Problems We See in Lake Park Homes

• Salt-air corrosion on operators within 18-24 months. Standard residential gate operators installed on Intracoastal-facing streets in Lake Park often fail in under two years. The same unit lasts a decade in Palm Beach Gardens. Our Lake Park quotes almost always include a sealed marine-rated enclosure and a sacrificial anode on the mounting hardware, because without them the repair won’t hold.
• Sagging gates traced to cracked post footings. The original gates on Lake Park’s mid-century homes are often hung on posts set in footings that have heaved and cracked over decades of salt-laden soil. Sagging is rarely just a hinge problem. We check the footing before we quote a repair, because fixing the hinge alone is wasted money if the post moves.
• Voltage surge damage from summer thunderstorms. Lake Park’s afternoon storms send surges that destroy unprotected operator control boards, even when the mechanical parts are sound. A homeowner hears the gate stop working and assumes the motor died. Often it’s the logic board, and we can replace just that board rather than the whole operator.
• Obsolete control boards on legacy operators. Many Lake Park gates run on operators installed 15 to 25 years ago. The boards are no longer manufactured, and sometimes the right repair is a retrofit kit. We’ll walk through what can be saved and what should be replaced, with the cost of each option in writing.

Pricing for Gate Repair in Lake Park, FL

We Also Serve Cities Near Lake Park

While this page is written for Lake Park homeowners, our crews also take on gate repairs in Jacksonville, Miami, Tampa, and Orlando. If you’re in one of those areas, the same written-price guarantee and the same C.A.R.E. cleanup routine apply.

FAQs About Gate Repair in Lake Park